Improved quantification of Chinese carbon fluxes using CO2/CO correlations in Asian outflow

[1] We use observed CO2:CO correlations in Asian outflow from the TRACE-P aircraft campaign (February–April 2001), together with a three-dimensional global chemical transport model (GEOS-CHEM), to constrain specific components of the east Asian CO2 budget including, in particular, Chinese emissions. The CO2/CO emission ratio varies with the source of CO2 (different combustion types versus the terrestrial biosphere) and provides a characteristic signature of source regions and source type. Observed CO2/CO correlation slopes in east Asian boundary layer outflow display distinct regional signatures ranging from 10–20 mol/mol (outflow from northeast China) to 80 mol/mol (over Japan). Model simulations using best a priori estimates of regional CO2 and CO sources from Streets et al. [2003] (anthropogenic), the CASA model (biospheric), and Duncan et al. [2003] (biomass burning) overestimate CO2 concentrations and CO2/CO slopes in the boundary layer outflow. Constraints from the CO2/CO slopes indicate that this must arise from an overestimate of the modeled regional net biospheric CO2 flux. Our corrected best estimate of the net biospheric source of CO2 from China for March–April 2001 is 3200 Gg C/d, which represents a 45 % reduction of the net flux from the CASA model. Previous analyses of the TRACE-P data had found that anthropogenic Chinese C

Towards understanding the variability in biospheric CO2 fluxes:Using FTIR spectrometry and a chemical transport model to investigate the sources and sinks of carbonyl sulfide and its link to CO2

Understanding carbon dioxide (CO2) biospheric processes is of great importance because the terrestrial exchange drives the seasonal and interannual variability of CO2 in the atmosphere. Atmospheric inversions based on CO2 concentration measurements alone can only determine net biosphere fluxes, but not differentiate between photosynthesis (uptake) and respiration (production). Carbonyl sulfide (OCS) could provide an important additional constraint: it is also taken up by plants during photosynthesis but not emitted during respiration, and therefore is a potential means to differentiate between these processes. Solar absorption Fourier Transform InfraRed (FTIR) spectrometry allows for the retrievals of the atmospheric concentrations of both CO2 and OCS from measured solar absorption spectra. Here, we investigate co-located and quasi-simultaneous FTIR measurements of OCS and CO2 performed at five selected sites located in the Northern Hemisphere. These measurements are compared to simulations of OCS and CO2 using a chemical transport model (GEOS-Chem). The coupled biospheric fluxes of OCS and CO2 from the simple biosphere model (SiB) are used in the study. The CO2 simulation with SiB fluxes agrees with the measurements well, while the OCS simulation reproduced a weaker drawdown than FTIR measurements at selected sites, and a smaller latitudinal gradient in the Northern Hemisphere during growing season when comparing with HIPPO (HIAPER Pole-to-Pole Observations) data spanning both hemispheres. An offset in the timing of the seasonal cycle minimum between SiB simulation and measurements is also seen. Using OCS as a photosynthesis proxy can help to understand how the biospheric processes are reproduced in models and to further understand the carbon cycle in the real world

COVID-19: UK frontline intensivists' emerging learning.

The Intensive Care Society held a webinar on 3 April 2020 at which representatives from 11 of the most COVID-19 experienced hospital trusts in England and Wales shared learning around five specific topic areas in an open forum. This paper summarises the emerging learning and practice shared by those frontline clinicians

Informed finite element modelling for wire and arc additively manufactured metallics—a case study on modular building connections

The use of 3D printing in modular building connections is a novel and promising technique. However, the performance of 3D printed steel modular building connections has not been investigated adequately to date. Therefore, this paper presents a three-dimensional finite element model (FEM), using the multi-purpose software Abaqus, to study the effect of different geometrical and material parameters on the ultimate behaviour of modular building connections (herein named 3DMBC) using a wire and arc additive manufacturing (WAAM) method, as part of the UK’s 3DMBC (3D Modular Building Connections) project. The proposed model considers material and geometrical non-linearities, initial imperfections, and the contact between adjacent surfaces. The finite element results are compared with the currently available experimental results and validated to ensure developed FEM can be used to analyse the behaviour of 3DMBC with some adjustments. Case studies were investigated using the validated model to analyse the ultimate behaviour with different nominal and WAAM-produced materials under various loading arrangements. Based on the results, it is recommended to conservatively use the treated or untreated WAAM material properties obtained in θ = 90◦ print orientation in the finite element modelling of 3DMBCs considering the complex component arrangements and multi-directional loading in the modular connections. It is also noted that the thickness of beams and columns of fully 3D printed connections can be increased to achieve the same level of performance as traditional modular connections. For the 3DMBCs printed using untreated WAAM, the thickness increment was found to be 50% in this study

Scientific, Back-Illuminated CCD Development for the Transiting Exoplanet Survey Satellite

We describe the development of the fully depleted, back illuminated charge coupled devices for the Transiting Exoplanet Survey Satellite, which includes a set of four wide angle telescopes, each having a 2x2 array of CCDs. The devices are fabricated on the newly upgraded 200-mm wafer line at Lincoln Laboratory. We discuss methods used to produce the devices and present early performance results from the 100- micron thick, 15x15-microns, 2k x 4k pixel frame transfer CCDs

Anthropogenic nitrogen inputs and impacts on oceanic N2O fluxes in the northern Indian Ocean: The need for an integrated observation and modelling approach

Anthropogenically-derived nitrogen input to the northern Indian Ocean has increased significantly in recent decades, based on both observational and model-derived estimates This external nutrient source is supplied by atmospheric deposition and riverine fluxes, and has the potential to affect the vulnerable biogeochemical systems of the Arabian Sea and Bay of Bengal, influencing productivity and oceanic production of the greenhouse-gas nitrous-oxide (N2O). We summarize current estimates of this external nitrogen source to the northern Indian Ocean from observations and models, highlight implications for regional marine N2O emissions using model-based analyses, and make recommendations for measurement and model needs to improve current estimates and future predictions of this impact. Current observationally-derived estimates of deposition and riverine nitrogen inputs are limited by sparse measurements and uncertainties on accurate characterization of nitrogen species composition. Ocean model assessments of the impact of external nitrogen sources on regional marine N2O production in the northern Indian Ocean estimate potentially significant changes but also have large associated uncertainties. We recommend an integrated program of basin-wide measurements combined with high-resolution modeling and more detailed characterization of nitrogen-cycle process to address these uncertainties and improve current estimates and predictions

CD28 between tolerance and autoimmunity: The side effects of animal models [version 1; referees: 2 approved]

Regulation of immune responses is critical for ensuring pathogen clearance and for preventing reaction against self-antigens. Failure or breakdown of immunological tolerance results in autoimmunity. CD28 is an important co-stimulatory receptor expressed on T cells that, upon specific ligand binding, delivers signals essential for full T-cell activation and for the development and homeostasis of suppressive regulatory T cells. Many in vivo mouse models have been used for understanding the role of CD28 in the maintenance of immune homeostasis, thus leading to the development of CD28 signaling modulators that have been approved for the treatment of some autoimmune diseases. Despite all of this progress, a deeper understanding of the differences between the mouse and human receptor is required to allow a safe translation of pre-clinical studies in efficient therapies. In this review, we discuss the role of CD28 in tolerance and autoimmunity and the clinical efficacy of drugs that block or enhance CD28 signaling, by highlighting the success and failure of pre-clinical studies, when translated to humans

Evaluating Oceanic Uptake of Atmospheric CCl4: A Combined Analysis of Model Simulations and Observations

We provide new estimates of the air‐sea flux of CCl4 using simulations from a global ocean biogeochemistry model (NEMO‐PlankTOM) in combination with depth‐resolved CCl4 observations from global oceanic databases. Estimates of global oceanic CCl4 uptake are derived from a range of model analyses, including prescribed parameterizations using reported values on hydrolysis and degradation, and analyses optimized using the global observational databases. We evaluate the sensitivity of our results to uncertainties in air‐sea gas exchange parameterization, estimation period, and circulation processes. Our best constrained estimate of ocean CCl4 uptake for the period 1996–2000 is 20.1 Gg/year (range 16.6–22.7), corresponding to estimates of the partial atmospheric lifetime with respect to ocean uptake of 124 (110–150) years. This new oceanic lifetime implies higher emissions of CCl4 than currently estimated and therefore a larger missing atmospheric source of CCl4

Development of CCDs for REXIS on OSIRIS-REx

The Regolith x-ray Imaging Spectrometer (REXIS) is a coded-aperture soft x-ray imaging instrument on the OSIRIS-REx spacecraft to be launched in 2016. The spacecraft will fly to and orbit the near-Earth asteroid Bennu, while REXIS maps the elemental distribution on the asteroid using x-ray fluorescence. The detector consists of a 2×2 array of backilluminated 1k×1k frame transfer CCDs with a flight heritage to Suzaku and Chandra. The back surface has a thin p[superscript +]-doped layer deposited by molecular-beam epitaxy (MBE) for maximum quantum efficiency and energy resolution at low x-ray energies. The CCDs also feature an integrated optical-blocking filter (OBF) to suppress visible and near-infrared light. The OBF is an aluminum film deposited directly on the CCD back surface and is mechanically more robust and less absorptive of x-rays than the conventional free-standing aluminum-coated polymer films. The CCDs have charge transfer inefficiencies of less than 10[superscript -6], and dark current of 1e-/pixel/second at the REXIS operating temperature of –60 °C. The resulting spectral resolution is 115 eV at 2 KeV. The extinction ratio of the filter is ~10[superscript 12] at 625 nm.United States. National Aeronautics and Space Administration. Strategic Astrophysics Technology Program (Grant NNX12AF22G)United States. National Aeronautics and Space Administration (Contract NNG12FD70C)United States. National Aeronautics and Space Administration (IPR NNG12FC01I)United States. National Aeronautics and Space Administration. Strategic Astrophysics Technology Program (IPR NNH12AU04I)United States. Air Force (Contract FA8721-05-C-0002