Objective and efficient terahertz signal denoising by transfer function reconstruction

As an essential processing step in many disciplines, signal denoising efficiently improves data quality without extra cost. However, it is relatively under-utilized for terahertz spectroscopy. The major technique reported uses wavelet denoising in the time-domain, which has a fuzzy physical meaning and limited performance in low-frequency and water-vapor regions. Here, we work from a new perspective by reconstructing the transfer function to remove noise-induced oscillations. The method is fully objective without a need for defining a threshold. Both reflection imaging and transmission imaging were conducted. The experimental results show that both low- and high-frequency noise and the water-vapor influence were efficiently removed. The spectrum accuracy was also improved, and the image contrast was significantly enhanced. The signal-to-noise ratio of the leaf image was increased up to 10 dB, with the 6 dB bandwidth being extended by over 0.5 THz

In vivo terahertz imaging to evaluate scar treatment strategies : silicone gel sheeting

Silicone gel sheeting (SGS) is widely used for scar treatment; however, studies showing its interaction with skin and efficacy of scar treatment are still lacking. THz light is non-ionizing and highly sensitive to changes in water content and thus skin hydration. In this work, we use in-vivo THz imaging to monitor how SGS affects the THz response of human skin during occlusion, and the associated THz reflectivity and refractive index changes are presented. We find that SGS effectively hydrates the skin beneath it, with minimal lateral effects beyond the sheeting. Our work demonstrates that THz imaging is able to detect the subtle hydration changes on the surface of human skin caused by SGS, and it has the potential to be used to evaluate different scar treatment strategies

Utilizing multilayer structures to enhance terahertz characterization of thin films ranging from aqueous solutions to histology slides

We propose a multilayer geometry to characterize thin-film samples in reflection terahertz time domain spectroscopy. Theory indicates that this geometry has higher sensitivity compared to ordinary transmission or reflection geometries when characterizing both low- and high-absorption samples. Pure water and water–ethanol mixtures are measured to verify the characterization accuracy of the proposed geometry and its capability to measure trace liquids. Paraffin-embedded oral cancer tissue is imaged to further show how the proposed geometry enhances the sensitivity for solid low-absorptive films

THz in vivo measurements : the effects of pressure on skin reflectivity

Terahertz (THz) light is non-ionizing and highly sensitive to subtle changes in water concentration which can be indicative of disease. The short THz penetration depth in bio-samples restricts in vivo measurements to be in a reflection geometry and the sample is often placed onto an imaging window. Upon contacting the imaging window, occlusion and compression of the skin affect the THz response. If not appropriately controlled, this could cause misleading results. In this work, we investigate and quantify how the applied pressure affects the THz response of skin and employ a stratified model to help understand the mechanisms at play. This work will enable future THz studies to have a more rigorous experimental protocol, which in turn will facilitate research in various potential biomedical applications under investigation

A robust protocol for in vivo THz skin measurements

This work presents an experimental setup to control the way in which pressure interferes with the repeatability of in vivo THz skin measurements. By integrating a pressure sensor circuit into our THz system, it is possible to identify which measurements were taken within a previously specified pressure range. The live response of the pressure sensor helps to acquire data within the desired pressure leading to greater consistency of data between measurements. Additionally, a protocol is proposed to help achieve repeatable results and to remove the effects of the natural variation of the skin through the course of the day. This technique has been shown to be able to quantify the changes induced in the skin following the application of a moisturising skin product and shows the measured result to be significantly different from natural skin variation. This research therefore prepares the way for further studies on the effectiveness of different skin products using in vivo THz measurements

Lieutenant Governor Murray's Public Schedule

Terahertz (THz) thin-film total internal reflection (TF-TIR) spectroscopy is shown to have an enhanced sensitivity to the vibrational properties of thin films in comparison with standard THz transmission spectroscopy. This increased sensitivity was used to track photoinduced modifications to the structure of thin films of methylammonium (MA) lead halide, MAPbI3–xBrx (x = 0, 0.5, 1, and 3). Initially, illumination strengthened the phonon modes around 2 THz, associated with Pb–I stretch modes coupled to the MA ions, whereas the 1 THz twist modes of the inorganic octahedra did not alter in strength. Under longer term illumination, the 1 THz phonon modes of encapsulated films slowly reduced in strength, whereas in films exposed to moisture and oxygen, these phonons weaken more rapidly and blue-shift in frequency. The rapid monitoring of environmentally induced changes to the vibrational modes afforded by TF-TIR spectroscopy offers applications in the characterization and quality control of the perovskite thin-film solar cells and other thin-film semiconductors

Design and fabrication of 3-D printed conductive polymer structures for THz polarization control

In this paper, we numerically and experimentally demonstrate the inverse polarization effect in three-dimensional (3-D) printed polarizers for the frequency range of 0.5 - 2.7 THz. The polarizers simply consist of 3-D printed strip lines of conductive polylactic acid (CPLA, Proto-Pasta) and do not require a substrate or any further metallic deposition. The experimental and numerical results show that the proposed structure acts as a broadband polarizer between the range of 0.3 THz to 2.7 THz, in which the inverse polarization effect is clearly seen for frequencies above 0.5 THz. In the inverse polarization effect, the transmission of the transverse electric (TE) component exceeds that of the TM component, in contrast to the behavior of a typical wire-grid polarizer. We show how the performance of the polarizers depends on the spacing and thickness of the CPLA structure; extinction ratios higher than 20 dB are achieved. This is the first report using CPLA to fabricate THz polarizers, demonstrating the potential of using conductive polymers to design THz components efficiently and robustly

Exploiting total internal reflection geometry for terahertz devices and enhanced sample characterization

To promote potential applications of terahertz (THz) technology more advanced functional THz devices with high performance are needed, including modulators, polarizers, lenses, wave retarders and anti-reflection coatings. This article summarizes recent progress in THz components built on functional materials including graphene, vanadium dioxide and metamaterials. Our key message is that while the choice of materials used in such devices is important, the geometry in which they are employed also has a significant effect on the performance achieved. In particular, we review devices operating in total internal reflection geometry and explain how this geometry is able to be exploited to achieve a variety of THz devices with broadband operatio