A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities

Point contact tunneling and low energy muon spin rotation are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different sputtering techniques: diode, dc magnetron and HIPIMS. The combined results are compared to radio-frequency tests performances of RF cavities made with the same processes. Degraded surface superconducting properties are found to correlate to lower quality factors and stronger Q-slope. In addition, both techniques find evidence for surface paramagnetism on all samples and particularly on Nb films prepared by HIPIMS

Investigating the Superconducting Properties and Surface Morphology of Sputtered Nb Films on Cu Due to Laser Treatment

Bulk niobium is currently the material of choice for superconducting radio frequency (SRF) cavities and is a well matured process. However, it is possible that SRF cavities could be further improved beyond bulk Nb by sputtering thin Nb films onto Cu cavities. Copper has a greater thermal conductivity than Nb and is also easier to machine, while sputtering films on the surface reduces the amount of Nb used to fabricate the whole cavity. However, sputtering Nb on Cu produces other issues, for example, the surface quality of the Cu affects the quality of the Nb deposited on the surface and therefore the superconducting parameters. As the Nb on the surface is not perfect, the magnetic field produced by the RF can enter the cavity earlier than expected, producing RF losses, which can in turn lead to a quench. One approach is to treat the Nb post deposition by irradiating the surface using a laser to polish the surface of the Nb and increase the surface magnetic field that the cavity can maintain while remaining in the Meissner state. A magnetic field penetration experiment designed and built at Daresbury Laboratory has been used to measure the field of full flux penetration to characterize the effect of the laser treatment on the superconducting properties of the Nb. Surface characterization and the response of the Nb in a dc magnetic field have also been performed to try and provide an explanation for the change in the superconducting properties. The results demonstrate that the laser treatment can lead to an increase in the magnetic field at which the flux penetrates from one side of the sample to the other, thus it could potentially improve the performance of Nb coated RF cavities

From cutting-edge pointwise cross-section to groupwise reaction rate: A primer

The nuclear research and development community has a history of using both integral and differential experiments to support accurate lattice-reactor, nuclear reactor criticality and shielding simulations, as well as verification and validation efforts of cross sections and emitted particle spectra. An important aspect to this type of analysis is the proper consideration of the contribution of the neutron spectrum in its entirety, with correct propagation of uncertainties and standard deviations derived from Monte Carlo simulations, to the local and total uncertainty in the simulated reactions rates (RRs), which usually only apply to one application at a time. This paper identifies deficiencies in the traditional treatment, and discusses correct handling of the RR uncertainty quantification and propagation, including details of the cross section components in the RR uncertainty estimates, which are verified for relevant applications. The methodology that rigorously captures the spectral shift and cross section contributions to the uncertainty in the RR are discussed with quantified examples that demonstrate the importance of the proper treatment of the spectrum profile and cross section contributions to the uncertainty in the RR and subsequent response functions. The recently developed inventory code FISPACT-II, when connected to the processed nuclear data libraries TENDL-2015, ENDF/B-VII.1, JENDL-4.0u or JEFF-3.2, forms an enhanced multi-physics platform providing a wide variety of advanced simulation methods for modelling activation, transmutation, burnup protocols and simulating radiation damage sources terms. The system has extended cutting-edge nuclear data forms, uncertainty quantification and propagation methods, which have been the subject of recent integral and differential, fission, fusion and accelerators validation efforts. The simulation system is used to accurately and predictively probe, understand and underpin a modern and sustainable understanding of the nuclear physics that is so important for many areas of science and technology; advanced fission and fuel systems, magnetic and inertial confinement fusion, high energy, accelerator physics, medical application, isotope production, earth exploration, astrophysics and homeland security

Engineering self-organising helium bubble lattices in tungsten

The self-organisation of void and gas bubbles in solids into a superlattices is an intriguing nanoscale phenomenon. Despite the discovery of these lattices 30 years ago, the atomistics behind the ordering mechanisms responsible for the formation of these nanostructures are yet to be fully elucidated. Here we report on the direct observation via transmission electron microscopy of the formation of bubble lattices under He+ ion bombardment. By careful control of the irradiation conditions, it has been possible to engineer the bubble size and spacing of the superlattice leading to important conclusions about the significance of vacancy supply in determining the physical characteristics of the system. Furthermore, no bubble lattice alignment was observed in the directions pointing to a key driving mechanism for the formation of these ordered nanostructures being the two-dimensional diffusion of self-interstitial atoms

An online expert network for high quality information on occupational safety and health: cross-sectional study of user satisfaction and impact

<p>Abstract</p> <p>Background</p> <p>Many people have difficulties finding information on health questions, including occupational safety and health (OSH) issues. One solution to alleviate these difficulties could be to offer questioners free-of-charge, online access to a network of OSH experts who provide tailored, high-quality information. The aim of this study was to assess whether network quality, respectively information quality, as perceived by the questioners, is associated with questioners' overall satisfaction and to explore the impact of the information received on questioners' knowledge, work and work functioning.</p> <p>Methods</p> <p>We evaluated the experiences of OSH questioners with the online network ArboAntwoord.com over a two-year period. In this network, approximately 80 qualified experts are available to answer OSH questions. By means of a questionnaire, we assessed questioners' overall satisfaction with the network, whether the network was user-friendly, easily accessible and easy to handle and whether the information provided was complete, applicable and received in a timely manner. The impact of the information on questioners' knowledge, work or work functioning was explored with seven questions. In the study period, 460 unique OSH questioners asked 851 OSH questions. In total, 205 of the 460 questioners completed the questionnaire (response rate 45%).</p> <p>Results</p> <p>Of the responders, 71% were satisfied with the ArboAntwoord network. Multiple logistic regression analysis showed that the applicability of the information had a positive influence on the questioners' overall satisfaction (OR = 16.0, 95% CI: 7.0-36.4). Also, user friendliness of the network (OR = 3.3, 95% CI: 1.3-8.6) and completeness of the information provided (OR = 3.0, 95% CI: 1.3-6.8) were positively related to the questioners' satisfaction. For 74% of the questioners, the information helped to increase their knowledge and understanding. Overall, 25% of the questioners indicated that the received information improved their work, work functioning or health.</p> <p>Conclusions</p> <p>A free-of-charge, online expert network in the field of OSH can be a useful strategy to provide OSH questioners with applicable, complete and timely information that may help improve safety and health at work. This study provides more insight in how to satisfy network questioners and about the potential impact of provided information on OSH.</p

The joint evaluated fission and fusion nuclear data library, JEFF-3.3

The joint evaluated fission and fusion nuclear data library 3.3 is described. New evaluations for neutron-induced interactions with the major actinides $^{235}$U, $^{238}$U and $^{239}$Pu, on $^{241}$Am and $^{23}$Na, $^{59}$Ni, Cr, Cu, Zr, Cd, Hf, W, Au, Pb and Bi are presented. It includes new fission yields, prompt fission neutron spectra and average number of neutrons per fission. In addition, new data for radioactive decay, thermal neutron scattering, gamma-ray emission, neutron activation, delayed neutrons and displacement damage are presented. JEFF-3.3 was complemented by files from the TENDL project. The libraries for photon, proton, deuteron, triton, helion and alpha-particle induced reactions are from TENDL-2017. The demands for uncertainty quantification in modeling led to many new covariance data for the evaluations. A comparison between results from model calculations using the JEFF-3.3 library and those from benchmark experiments for criticality, delayed neutron yields, shielding and decay heat, reveals that JEFF-3.3 performes very well for a wide range of nuclear technology applications, in particular nuclear energy