A three-phase to single-phase matrix converter for high-frequency induction heating

The paper describes a new three-phase to single-phase matrix converter featuring unity input power factor, very low input total harmonic distortion, and soft-switching over the full power range, for high frequency induction heating applications. A variable output pulse density modulation scheme has been proposed for stable operation of the converter, with the notable feature of requiring no on-line calculations for the synthesis of three-phase input current system. Practical issues in realising the converter, viz. line frequency synchronisation and output current circulation, are described. Good agreement between simulation and experimental results confirm the benefits of the proposed converter

Formation of an Accretion Flow

After a star has been tidally disrupted by a black hole, the debris forms an elongated stream. We start by studying the evolution of this gas before its bound part returns to the original stellar pericenter. While the axial motion is entirely ballistic, the transverse directions of the stream are usually thinner due to the confining effects of self-gravity. This basic picture may also be influenced by additional physical effects such as clump formation, hydrogen recombination, magnetic fields and the interaction with the ambient medium. We then examine the fate of this stream when it comes back to the vicinity of the black hole to form an accretion flow. Despite recent progress, the hydrodynamics of this phase remains uncertain due to computational limitations that have so far prevented us from performing a fully self-consistent simulation. Most of the initial energy dissipation appears to be provided by a self-crossing shock that results from an intersection of the stream with itself. The debris evolution during this collision depends on relativistic apsidal precession, expansion of the stream from pericenter, and nodal precession induced by the black hole spin. Although the combined influence of these effects is not fully understood, current works suggest that this interaction is typically too weak to significantly circularize the trajectories, with its main consequence being an expansion of the shocked gas. Global simulations of disc formation performed for simplified initial conditions find that the debris experiences additional collisions that cause its orbits to become more circular until eventually settling into a thick and extended structure. These works suggest that this process completes faster for more relativistic encounters due to the stronger shocks involved. It is instead significantly delayed if weaker shocks take place, allowing the gas to retain large eccentricities during multiple orbits. Radiation produced as the matter gets heated by circularizing shocks may leave the system through photon diffusion and participate in the emerging luminosity. This current picture of accretion flow formation results from recent theoretical works synthesizing the interplay between different aspects of physics. In comparison, early analytical works correctly identified the essential processes involved in disc formation, but had difficulty developing analytic frameworks that accurately combined non-linear hydrodynamical processes with the underlying relativistic dynamics. However, important aspects still remain to be understood at the time of writing, due to numerical challenges and the complexity of this process

The Intensities of Cosmic Ray H and He Nuclei at ~250 MeV/nuc Measured by Voyagers 1 and 2 - Using these Intensities to Determine the Solar Modulation Parameter in the Inner Heliosphere and the Heliosheath Over a 40 Year Time Period

We have determined the solar modulation potential, phi, vs. time that is observed at Voyager 1 and 2 from measurements of the H and He nuclei intensities at a common energy of 250 MeVnuc. The H nuclei have a rigidity 0.7 GV, the He nuclei 1.4 GV. These measurements cover a 40 year time period, which includes almost 4 cycles of solar 11 year sunspot variations, throughout the inner heliosphere out to the HTS at distances of 95 AU and 85 AU, respectively at V1 and V2, and then beyond in the heliosheath. Inside the HTS the modulation potential vs. time curves at V1 and V2 show a very similar temporal structure to those observed at the Earth. During a later period of maximum solar modulation from 2000.0 to 2005.0 when V1 and V2 are in the outer heliosphere between 60-94 AU, the main temporal features of the modulation potential curves at all 3 locations match up with appropriate time delays at V1 and V2 if it is assumed that spatially coherent structures are moving outward past V1 and V2, with outward speeds of up to 700 Kms negative 1. After 2004.0 V1 and V2 are at latitudes of positive 35 and negative 30 respectively, placing lower limits on the latitude extent of these structures. Beyond the HTS in the heliosheath the modulation potential slowly decreases at both spacecraft with only a weak evidence of the unusual modulation minimum observed at the Earth in 2009, for example. A sudden decrease of the modulation potential 50 MV for both H and He nuclei occurs at V1 just before the heliopause crossing at about 122 AU. This decrease has not yet been observed at V2, which is now at 113 AU and still observing a modulation potential 60 MV.Comment: 28 pages, 9 Figure

Termination shock particle spectral features

Spectral features of energetic H ions accelerated at the termination shock may be evidence of two components. At low energies the energy spectrum is ~E^(–1.55), with break at ~0.4 MeV to E^(–2.2). A second component appears above ~1 MeV with a spectrum of E^(–1.27) with a break at ~3.2 MeV. Even though the intensities upstream are highly variable, the same spectral break energies are observed, suggesting that these are durable features of the source spectrum. The acceleration processes for the two components may differ, with the lower energy component serving as the injection source for diffusive shock acceleration of the higher energy component. Alternatively, the spectral features may result from the energy dependence of the diffusion tensor that affects the threshold for diffusive shock acceleration

Voyager observations of galactic and anomalous cosmic rays in the helioshealth

Anomalous cosmic rays display large temporal variations at the time and location where Voyager 1 (V1) crossed the heliospheric termination shock (2004.86) (94AU, 34°N). On a short time scale (3 months) there was a large decrease produced by a series of merged interaction regions (MIR), the first of which was associated with the intense Oct./Nov. 2003 solar events. On a longer time scale there is a remarkable correlation between changes in the galactic cosmic ray (GCR) intensity and those of 10–56 MeV/n ACR He and 30–56 MeV H extending over a 4.3 year period with the GCRs exhibiting their expected behavior over this part of the 11 and 22 year solar activity and heliomagnetic cycle. The relative changes in the ACR and GCR are the same for both the short term and long term variations. The comparative V1/V2 ACR and GCR spectra in the foreshock and heliosheath indicate that at this time most of the higher energy ACRs are not being accelerated near V1 but must have their source region elsewhere — possibly near the equatorial region of the TS as was suggested in our first paper on the TS crossing (1)

Transient intensity changes of cosmic rays beyond the heliospheric termination shock as observed at Voyager 1

This paper continues our studies of temporal variations of cosmic rays beyond the heliospheric termination shock (HTS) using Voyager 1 (V1) data when V1 was beyond 94 AU. This new study utilizes cosmic ray protons and electrons of several energies. Notable transient decreases of 5–50% are observed in galactic cosmic ray nuclei and electrons at V1 shortly after similar decreases are observed at Voyager 2 (V2) still inside the HTS. These decreases at V1 appear to be related to the large solar events in September 2005 and December 2006 and the resulting outward moving interplanetary shock. These two large interplanetary shocks were the largest observed at V2 after V1 crossed the HTS at the end of 2004. They were observed at V2 just inside the HTS at 2006.16 and 2007.43 providing timing markers for V1. From the timing of the intensity decreases observed at V1 as the shocks first reach the HTS and then later reach V1 itself, we can estimate the shock speed beyond the HTS to be between 240 and 300 km s^(−1) in both cases. From the timing of the decreases observed when the shock first reaches the HTS and then several months later encounters the heliopause, we can estimate the heliosheath thickness to be 31 ± 4 and 37 ± 6 AU, respectively, for the two sequences of three decreases seen at V1. These values, along with the distances to the HTS that are determined, give distances from the Sun to the heliopause of 121 ± 4 and 124 ± 6 AU, respectively