Novel Li3ClO based glasses with superionic properties for lithium batteries

Three types of next generation batteries are currently being envisaged among the international community: metal-air batteries, multivalent cation batteries and all-solid-state batteries. These battery designs require high-performance, safe and cost effective electrolytes that are compatible with optimized electrode materials. Solid electrolytes have not yet been extensively employed in commercial batteries as they suffer from poor ionic conduction at acceptable temperatures and insufficient stability with respect to lithium-metal. Here we show a novel type of glasses, which evolve from an antiperovskite structure and that show the highest ionic conductivity ever reported for the Li-ion (25 mS cm-1 at 25 °C). These glassy electrolytes for lithium batteries are inexpensive, light, recyclable, non-flammable and non-toxic. Moreover, they present a wide electrochemical window (higher than 8 V) and thermal stability within the application range of temperatures

First principles calculations and experiments for Cu-Mg/Li hydrides negative electrodes

We have studied CuLi0.08Mg1.92 and determined that the compound reacts with hydrogen to form CuLi0.08Mg 1.92H5 [1]. Additionally, we have proposed the compound as a negative electrode material which is the main purpose of the present study. Moreover, we have observed that the latter compound acts as a catalyst in the formation of MgH2, LiH, TiH2 [2] and hydrogen desorption. In this work, first principles and phonon calculations were performed in order to establish the reactions occurring at the negative electrode of a Li conversion battery in presence of CuLi0.08Mg1.92H 5 and (Li) - solid solution of Mg in Li - Approximately Li 2Mg3. We have calculated the minimum theoretical specific capacity to be 1156 mAh/g (for an anode with 100% of CuLi0.08Mg 1.92H5) and the Eeq = 0.81 V (vs. Li+/Li) at 298 K. Furthermore, we have determined all the reactions occurring in the referred system and its sequence using Inelastic Incoherent Neutron Scattering (TINS) and X-Ray Diffraction (XRD). (c) 2013 Materials Research Society

Lessons on Marine Protected Area Management in Northern Boreal Regions from the United States and Norway

In comparison to tropical reef systems, relatively few marine protected areas (MPA’s) exist in temperate or subarctic systems (e.g., North Pacific and North Atlantic) where species diversity is lower, abundance of individual species is often higher, and many fish species exhibit large amounts of movement during one or more of their life stages, especially as adults. A review of MPA’s in three northern areas—the Northwest Atlantic, Northeast Atlantic, and the Northeast Pacific—indicates that MPA’s can be useful management tools towards fisheries management and habitat conservation. However, achieving fishery goals, such as sustainable use of the fisheries resources, will depend on population abundance (relative to unfished conditions) and fish behavior and movement. For example, depleted populations of stationary species such as Atlantic sea scallops, Placopecten magellanicus, in the Northeast Atlantic and European lobster, Homarus grammarus, in the North Sea have responded positively to small MPA’s, whereas migratory offshore Atlantic cod, Gadus morhua, and Pacific cod, Gadus macrocephalus, apparently do not appear to benefit from closed areas because of movement into fished areas. Efficient habitat conservation requires detailed habitat mapping on relevant spatial scales. In northern boreal systems with large remote areas, this information is difficult and expensive to access. An alternative strategy of closing and protecting unexploited areas has worked well for the Aleutian Island coral closure area in Alaska. MPA’s can be effective fisheries management tools when the species to be protected have been depleted and show a small to moderate level of movement, and reproductive success is ensured. MPA’s can be effective at preserving habitat when the design is based on scientific information and takes into account the impact on the user groups.publishedVersio

Antiinflammatory Therapy with Canakinumab for Atherosclerotic Disease

Background: Experimental and clinical data suggest that reducing inflammation without affecting lipid levels may reduce the risk of cardiovascular disease. Yet, the inflammatory hypothesis of atherothrombosis has remained unproved. Methods: We conducted a randomized, double-blind trial of canakinumab, a therapeutic monoclonal antibody targeting interleukin-1β, involving 10,061 patients with previous myocardial infarction and a high-sensitivity C-reactive protein level of 2 mg or more per liter. The trial compared three doses of canakinumab (50 mg, 150 mg, and 300 mg, administered subcutaneously every 3 months) with placebo. The primary efficacy end point was nonfatal myocardial infarction, nonfatal stroke, or cardiovascular death. RESULTS: At 48 months, the median reduction from baseline in the high-sensitivity C-reactive protein level was 26 percentage points greater in the group that received the 50-mg dose of canakinumab, 37 percentage points greater in the 150-mg group, and 41 percentage points greater in the 300-mg group than in the placebo group. Canakinumab did not reduce lipid levels from baseline. At a median follow-up of 3.7 years, the incidence rate for the primary end point was 4.50 events per 100 person-years in the placebo group, 4.11 events per 100 person-years in the 50-mg group, 3.86 events per 100 person-years in the 150-mg group, and 3.90 events per 100 person-years in the 300-mg group. The hazard ratios as compared with placebo were as follows: in the 50-mg group, 0.93 (95% confidence interval [CI], 0.80 to 1.07; P = 0.30); in the 150-mg group, 0.85 (95% CI, 0.74 to 0.98; P = 0.021); and in the 300-mg group, 0.86 (95% CI, 0.75 to 0.99; P = 0.031). The 150-mg dose, but not the other doses, met the prespecified multiplicity-adjusted threshold for statistical significance for the primary end point and the secondary end point that additionally included hospitalization for unstable angina that led to urgent revascularization (hazard ratio vs. placebo, 0.83; 95% CI, 0.73 to 0.95; P = 0.005). Canakinumab was associated with a higher incidence of fatal infection than was placebo. There was no significant difference in all-cause mortality (hazard ratio for all canakinumab doses vs. placebo, 0.94; 95% CI, 0.83 to 1.06; P = 0.31). Conclusions: Antiinflammatory therapy targeting the interleukin-1β innate immunity pathway with canakinumab at a dose of 150 mg every 3 months led to a significantly lower rate of recurrent cardiovascular events than placebo, independent of lipid-level lowering. (Funded by Novartis; CANTOS ClinicalTrials.gov number, NCT01327846.

A search for neutral Higgs bosons in the MSSM and models with two scalar field doublets

A search is described for the neutral Higgs bosons h^0 and A^0 predicted by models with two scalar field doublets and, in particular, the Minimal Supersymmetric Standard Model (MSSM). The search in the Z^0 h^0 and h^0 A^0 production channels is based on data corresponding to an integrated luminosity of 25 pb^{-1} from e^+e^- collisions at centre-of-mass energies between 130 and 172GeV collected with the OPAL detector at LEP. The observation of a number of candidates consistent with Standard Model background expectations is used in combination with earlier results from data collected at the Z^0 resonance to set limits on m_h and m_A in general models with two scalar field doublets and in the MSSM. For example, in the MSSM, for tan(beta) > 1, minimal and maximal scalar top quark mixing and soft SUSY-breaking masses of 1 TeV, the 95% confidence level limits m_h > 59.0 GeV and m_A > 59.5 GeV are obtained. For the first time, the MSSM parameter space is explored in a detailed scan.A search is described for the neutral Higgs bosons h^0 and A^0 predicted by models with two scalar field doublets and, in particular, the Minimal Supersymmetric Standard Model (MSSM). The search in the Z^0 h^0 and h^0 A^0 production channels is based on data corresponding to an integrated luminosity of 25 pb^{-1} from e^+e^- collisions at centre-of-mass energies between 130 and 172 GeV collected with the OPAL detector at LEP. The observation of a number of candidates consistent with Standard Model background expectations is used in combination with earlier results from data collected at the Z^0 resonance to set limits on m_h and m_A in general models with two scalar field doublets and in the MSSM. For example, in the MSSM, for tan(beta) > 1, minimal and maximal scalar top quark mixing and soft SUSY-breaking masses of 1 TeV, the 95% confidence level limits m_h > 59.0 GeV and m_A > 59.5 GeV are obtained. For the first time, the MSSM parameter space is explored in a detailed scan

Spin alignment of leading K∗(892)0K^{*}(892)^{0} mesons in hadronic Z0Z^0 decays

Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K*(892)^0 mesons from hadronic Z^0 decays have been measured over the full range of K^*0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x_p values above 0.3, with the matrix element rho_00 rising to 0.66 +/- 0.11 for x_p > 0.7. The values of the real part of the off-diagonal element rho_1-1 are negative at large x_p, with a weighted average value of -0.09 +/- 0.03 for x_p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the qq(bar) system from the Z^0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x_p range. The K^*0 fragmentation function has also been measured and the total rate determined to be 0.74 +/- 0.02 +/- 0.02 K*(892)^0 mesons per hadronic Z^0 decay.Helicity density matrix elements for inclusive K ∗ (892) 0 mesons from hadronic Z 0 decays have been measured over the full range of K ∗ 0 momentum using data taken with the OPAL experiment at LEP. A preference for occupation of the helicity zero state is observed at all scaled momentum x p values above 0.3, with the matrix element ϱ 00 rising to 0.66 ± 0.11 for x p > 0.7. The values of the real part of the off-diagonal element ϱ 1 - 1 are negative at large x p , with a weighted average value of −0.09 ± 0.03 for x p > 0.3, in agreement with new theoretical predictions based on Standard Model parameters and coherent fragmentation of the q q system from the Z 0 decay. All other helicity density matrix elements measured are consistent with zero over the entire x p range. The K ∗ 0 fragmentation function has also been measured and the total rate determined to be 0.74 ± 0.02 ± 0.02 K ∗ (892) 0 mesons per hadronic Z 0 decay

Phase structure of ceramics Al[2]O[3]-ZrW[2]O[8]

In the course of work the phase composition of the ceramic composite material Al[2]O[3] - 50 % ZrW[2]O[8] was studied. On the polished surface of the Al[2]O[3]-ZrW[2]O[8] sintered composite can be allocated three areas: dark gray matrix, white inclusions of an irregular form and spherical inclusions. The average size of spherical inclusions was equal to 15 [mu]m. The phase structure of ceramic composite was presented by trigonal modification of aluminum oxide, cubic zirconium tungstate, monoclinic modification of zirconium oxide and tungsten oxide

Physical and mechanical properties and deformation behavior of porous ceramics based on plasma chemical powders Al[2]O[3], ZrO[2](MgO)

This work investigates the behavior of porous alumina and zirconia stabilized with magnesium oxide (within the porosity range of 18% to 70%) ceramics when subjected to deformation by compression and shearing. The analysis of strain-deformation curves showed that there was a transition from a typically brittle state for relatively dense ceramics, to a pseudo-plastic one with a high rate of porosity. The values of the effective elasticity modulus, effective shear modulus and Poisson's ratio decrease with an increase in volume in the pore space of ceramics, which correlates with the appearance of plural cracking during the deformation of ceramics with a high level of porosity. There was made analysis of the nature of the destruction of ceramics with the same level of porosity. The difference in the deformation behavior of the ZrO[2]-MgO compared to the Al[2]O[3] ceramic was the fact that the transition from a typically brittle to tively dense ceramics to the pseudo -plastic at a high level of porosity is implemented with a lower level of porosity