Using XDAQ in Application Scenarios of the CMS Experiment

XDAQ is a generic data acquisition software environment that emerged from a rich set of of use-cases encountered in the CMS experiment. They cover not the deployment for multiple sub-detectors and the operation of different processing and networking equipment as well as a distributed collaboration of users with different needs. The use of the software in various application scenarios demonstrated the viability of the approach. We discuss two applications, the tracker local DAQ system for front-end commissioning and the muon chamber validation system. The description is completed by a brief overview of XDAQ.Comment: Conference CHEP 2003 (Computing in High Energy and Nuclear Physics, La Jolla, CA

The CMS Event Builder

The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation. This paper describes studies of an EVB test-bench based on 64 PCs acting as data sources and data consumers and employing both Gigabit Ethernet and Myrinet technologies as the interconnect. In the case of Ethernet, protocols based on Layer-2 frames and on TCP/IP are evaluated. Results from ongoing studies, including measurements on throughput and scaling are presented. The architecture of the baseline CMS event builder will be outlined. The event builder is organised into two stages with intelligent buffers in between. The first stage contains 64 switches performing a first level of data concentration by building super-fragments from fragments of 8 data sources. The second stage combines the 64 super-fragments into full events. This architecture allows installation of the second stage of the event builder in steps, with the overall throughput scaling linearly with the number of switches in the second stage. Possible implementations of the components of the event builder are discussed and the expected performance of the full event builder is outlined.Comment: Conference CHEP0

The CMS event builder demonstrator based on Myrinet

The data acquisition system for the CMS experiment at the Large Hadron Collider (LHC) will require a large and high performance event building network. Several switch technologies are currently being evaluated in order to compare different architectures for the event builder. One candidate is Myrinet. This paper describes the demonstrator which has been set up to study a small-scale (8*8) event builder based on a Myrinet switch. Measurements are presented on throughput, overhead and scaling for various traffic conditions. Results are shown on event building with a push architecture. (6 refs)

A software approach for readout and data acquisition in CMS

Traditional systems dominated by performance constraints tend to neglect other qualities such as maintainability and configurability. Object-Orientation allows one to encapsulate the technology differences in communication sub-systems and to provide a uniform view of data transport layer to the systems engineer. We applied this paradigm to the design and implementation of intelligent data servers in the Compact Muon Solenoid (CMS) data acquisition system at CERN to easily exploiting the physical communication resources of the available equipment. CMS is a high-energy physics experiment under study that incorporates a highly distributed data acquisition system. This paper outlines the architecture of one part, the so called Readout Unit, and shows how we can exploit the object advantage for systems with specific data rate requirements. A C++ streams communication layer with zero copying functionality has been established for UDP, TCP, DLPI and specific Myrinet and VME bus communication on the VxWorks real-time operating system. This software provides performance close to the hardware channel and hides communication details from the application programmers. (28 refs)

Search for Narrow Diphoton Resonances and for gamma-gamma+W/Z Signatures in p\bar p Collisions at sqrt(s)=1.8 TeV

We present results of searches for diphoton resonances produced both inclusively and also in association with a vector boson (W or Z) using 100 pb^{-1} of p\bar p collisions using the CDF detector. We set upper limits on the product of cross section times branching ratio for both p\bar p\to\gamma\gamma + X and p\bar p\to\gamma\gamma + W/Z. Comparing the inclusive production to the expectations from heavy sgoldstinos we derive limits on the supersymmetry-breaking scale sqrt{F} in the TeV range, depending on the sgoldstino mass and the choice of other parameters. Also, using a NLO prediction for the associated production of a Higgs boson with a W or Z boson, we set an upper limit on the branching ratio for H\to\gamma\gamma. Finally, we set a lower limit on the mass of a `bosophilic' Higgs boson (e.g. one which couples only to \gamma, W, and Z$ bosons with standard model couplings) of 82 GeV/c^2 at 95% confidence level.Comment: 30 pages, 11 figure

The 2 Tbps "Data to Surface" System of the CMS Data Acquisition

The Data Acquisition system of the CMS experiment, at the CERN LHC collider, is designed to build 1~MB events at a sustained rate of 100 kHz and to provide sufficient computing power to filter the events by a factor of 1000. The Data to Surface (D2S) system is the first layer of the Data Acquisition interfacing the underground subdetector readout electronics to the surface Event Builder. It collects the 100~GB/s input data from a large number of front-end cards (650) , implements a first stage event building by combining multiple sources into lar ger-size data fragments, and transports them to the surface for the full event building. The Data to Surface system can operate at the maximum rate of 2 Tbps. This paper describes the layout, reconfigurability and production validation of the D2S system which is to be installed by December 2005

Measurement of the Helicity of W Bosons in Top Quark Decays

We use the transverse momentum spectrum of leptons in the decay chain t-->bW with W-->l nu to measure the helicity of the W bosons in the top quark rest frame. Our measurement uses a ttbar sample isolated in 106 +/- 4 inverse picobarns of data collected in ppbar collisions at sqrt(s)=1.8 TeV with the CDF detector at the Fermilab Tevatron. Assuming a standard V--A weak decay, we find that the fraction of W's with zero helicity in the top rest frame is F_0 = 0.91 +/- 0.37 (stat) +/- 0.13 (syst), consistent with the standard model prediction of F_0=0.70 for a top mass of 175 GeV/c**2.Comment: Submitted to PRL. 8 pages, 2 figure