The Role of the Hydrolysis and Zirconium Concentration on the Structure and Anticorrosion Performances of a Hybrid Silicate Sol-Gel Coating

In sol-gel chemistry, hydrolysis is the key step in the formation of the reactive hydroxide groups that are responsible for the formation of inorganic networks via the occurrence of condensation reactions. Though previous studies have investigated the effect of the hydrolysis conditions on the structure of organically modified silicates (ormosils), no study, to our knowledge, has investigated this variable on the structure of hybrid materials prepared by combinations of an ormosil and a transition metal (TM). Here, we propose to investigate this effect in a hybrid material composed of 3-trimethoxysilylpropylmethacrylate and a zirconium complex. To also highlight the effects of the precursor’s concentrations on the hydrolysis and condensation reactions of the hybrid materials, their relative content was altered along with the hydrolysis degree. The anticorrosion barrier properties were identified by characterisation of coatings deposited on AA2024-T3 substrates and correlation between the structure and the anticorrosion properties of the coatings were performed based on results obtained from structural characterisations (DLS, FTIR, 29Si-NMR, DSC, AFM and SEM) and corrosion testing (EIS and NSS). It is demonstrated that competition in the formation of siloxane and Si-O-Zr bonds takes place and can be controlled by the degree of hydrolysis and the concentration of the zirconium complex. This effect was found to dramatically alter the morphology of the coatings and their subsequent anticorrosion performances. At shortterm exposure times, it is found that the most condensed materials exhibited a higher corrosion resistance while over longer periods the performances were found to level. This article highlighted the critical impact of the hydrolysis degree and zirconium concentration on the connectivity of hybrid sol-gel coatings and the impact this has on corrosion performances

Corrosion inhibition effect of a benzimidazole derivative on heat exchanger tubing materials during acid cleaning of multistage flash desalination plants

A benzimidazole derivative, 2-(2-bromophenyl)-1-methyl-1Hbenzimidazole (2BPB) has been studied as a corrosion inhibitor for Cu-Ni 70/30 and 90/10 alloys in 1 mol/dm3 HCl solution at low and high temperatures using the weight loss, electrochemical (potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), & cyclic voltammetry (CV)), and surface characterization (scanning electron microscopy (SEM) & Fouriertransform infrared spectroscopy (FTIR)) techniques. The effect of immersion time (up to 72 h) and addition of iodide ions on the inhibition efficiency of 2BPB have also been investigated. At low temperature, 1.0 g/L 2BPB inhibits Cu-Ni 70/30 and 90/10 alloys by 88.9 ± 4.8% and 57.5 ± 1.3%, respectively. The performance of 2BPB improves with increase in immersion time and addition of iodide ions but slightly depreciates with rise in temperature. 2BPB acts as a mixed type corrosion inhibitor and adsorbs on the alloys surfaces through physical adsorption mechanism. SEM and FTIR results confirm the adsorption of 2BPB on the alloys surfaces. 2BPB is a potential low toxic candidate for the formulation of acid corrosion inhibitor for Cu-Ni alloys

Progress in the development of sour corrosion inhibitors: Past, present, and future perspectives

Metallic pipelines and gathering tanks play a vital role during oil and gas exploration, production, transmission, and processing. These facilities are usually attacked by corrosion. The use of corrosion inhibitors is one of the most economical and reliable approaches to control the corrosion of oil and gas metallic facilities. This paper looks at the progress made in the development of sour corrosion inhibitors from early 1900 to date. Scientific literatures were reviewed. The review identified four classes of organic corrosion inhibitors for sour environments, namely, amine-based, imidazoline-based, polymer-based, and Gemini-surfactant-based inhibitors. The strengths and weaknesses of these inhibitors were highlighted. The review revealed that the patronage of amine-based chemistries has declined, and the current technology is based on imidazoline and quaternary salt chemistries. The existing knowledge gap and the future research direction in the area of sour corrosion inhibitors development have been highlighted

Cowpea [Vigna unguiculata (L.) Walp] herbage yield and nutritional quality in cowpea-sorghum mixed strip intercropping systems

En los sistemas tradicionales de cultivo intercalado de frijol caupí y sorgo en franjas y filas, el rendimiento de forraje del frijol caupí se reduce significativamente debido a la intensa competencia y al dominio del sorgo en la adquisición de recursos para el cultivo. Este estudio de campo evaluó novedosos sistemas de cultivo intercalado en franjas mixtas de frijol caupí forrajero y sorgo con diferente número de filas de cultivo en diferentes disposiciones espaciales. El frijol caupí se intercaló con el sorgo en franjas de 8, 12 y 16 filas con un espaciamiento de 30, 45 y 60 cm entre las filas. En cada franja se mantuvo igual número de filas de frijol caupí y sorgo. Para la ejecución de los ensayos de campo durante las temporadas de verano de 2013 y 2014 se utilizó un diseño factorial en bloques completos aleatorizados con tres repeticiones. Las franjas con 12 filas y un espaciamiento de 60 cm entre las filas afectaron positivamente a todas las variables agronómicas del frijol caupí que condujeron al máximo rendimiento forrajero (22.2 y 23.7 t/ha en 2013 y 2014, respectivamente) y de biomasa de materia seca (6.63 y 6.94 t/ha en 2013 y 2014, respectivamente). En cambio, las franjas de 8 filas con un espaciamiento de 30 cm superaron a otros sistemas de cultivo intercalado al obtener el rendimiento máximo de hierba y de biomasa de materia seca del sorgo. El sistema de cultivo intercalado compuesto por franjas de 12 filas con un espaciamiento de 60 cm entre las filas siguió siendo superior, al registrar el contenido máximo de proteína bruta, grasas y cenizas junto con el mínimo contenido de fibra de frijol caupí. Además, este sistema de cultivo intercalado bajo el resto de las disposiciones espaciales también permaneció incomparable, mientras que las franjas de 16 filas bajo todas las geometrías de siembra permanecieron inferiores a otros sistemas de cultivo intercalado. Por lo tanto, el cultivo intercalado de frijol caupí con sorgo en franjas de 12 filas con un espaciado de 60 cm ofrece una solución biológicamente viable para mejorar la biomasa y la calidad del forraje del caupí en cultivo intercalado con sorgo.In traditional row and strip cowpea-sorghum intercropping systems, cowpea forage yield reduces significantly due to intense competition and dominance of sorghum in acquiring growth resources. This field study evaluated novel mixed strip intercropping systems of forage cowpea and sorghum having different number of crops rows arranged under different spatial arrangements. Cowpea was intercropped with sorghum in 8, 12 and 16 rows strips with row-row spacing of 30, 45 and 60 cm. In each strip, equal number of rows of cowpea and sorghum were maintained. Factorial arrangement of randomized complete block design with three replicates was used to execute the field trials during summer seasons of 2013 and 2014. Strips having 12 rows and 60 cm row-row spacing positively affected all agronomic variables of cowpea which led to maximum forage yield (22.2 and 23.7 t ha-1 during 2013 and 2014 respectively) and dry matter biomass (6.63 and 6.94 t ha-1 during 2013 and 2014 respectively). In contrast, 8-rows strips having line spacing of 30 cm outperformed other intercropping systems by yielding the maximum herbage yield and dry matter biomass of sorghum. The intercropping system comprising of 12-rows strips with 60 cm row-row spacing remained superior in recording the maximum crude protein, fats and total ash along with the minimum fiber content of cowpea. In addition, this intercropping system under rest of spatial arrangements also remained unmatched, while 16-rows strips under all planting geometries remained inferior to other intercropping systems. Thus, cowpea intercropping with sorghum in 12-rows strips having 60 cm spacing offers biologically viable solution to improve biomass and forage quality of cowpea in intercropping with sorghum

Global burden of peripheral artery disease and its risk factors, 1990–2019 : a systematic analysis for the Global Burden of Disease Study 2019

peripheral artery disease were modelled using the Global Burden of Disease, Injuries, and Risk Factors Study (GBD) 2019 database. Prevalence, disability-adjusted life years (DALYs), and mortality estimates of peripheral artery disease were extracted from GBD 2019. Total DALYs and age-standardised DALY rate of peripheral artery disease attributed to modifiable risk factors were also assessed. Findings In 2019, the number of people aged 40 years and older with peripheral artery disease was 113 million (95% uncertainty interval [UI] 99·2–128·4), with a global prevalence of 1·52% (95% UI 1·33–1·72), of which 42·6% was in countries with low to middle Socio-demographic Index (SDI). The global prevalence of peripheral artery disease was higher in older people, (14·91% [12·41–17·87] in those aged 80–84 years), and was generally higher in females than in males. Globally, the total number of DALYs attributable to modifiable risk factors in 2019 accounted for 69·4% (64·2–74·3) of total peripheral artery disease DALYs. The prevalence of peripheral artery disease was highest in countries with high SDI and lowest in countries with low SDI, whereas DALY and mortality rates showed U-shaped curves, with the highest burden in the high and low SDI quintiles. Interpretation The total number of people with peripheral artery disease has increased globally from 1990 to 2019. Despite the lower prevalence of peripheral artery disease in males and low-income countries, these groups showed similar DALY rates to females and higher-income countries, highlighting disproportionate burden in these groups. Modifiable risk factors were responsible for around 70% of the global peripheral artery disease burden. Public measures could mitigate the burden of peripheral artery disease by modifying risk factors

Global, regional, and national burden of disorders affecting the nervous system, 1990–2021: a systematic analysis for the Global Burden of Disease Study 2021

BackgroundDisorders affecting the nervous system are diverse and include neurodevelopmental disorders, late-life neurodegeneration, and newly emergent conditions, such as cognitive impairment following COVID-19. Previous publications from the Global Burden of Disease, Injuries, and Risk Factor Study estimated the burden of 15 neurological conditions in 2015 and 2016, but these analyses did not include neurodevelopmental disorders, as defined by the International Classification of Diseases (ICD)-11, or a subset of cases of congenital, neonatal, and infectious conditions that cause neurological damage. Here, we estimate nervous system health loss caused by 37 unique conditions and their associated risk factors globally, regionally, and nationally from 1990 to 2021.MethodsWe estimated mortality, prevalence, years lived with disability (YLDs), years of life lost (YLLs), and disability-adjusted life-years (DALYs), with corresponding 95% uncertainty intervals (UIs), by age and sex in 204 countries and territories, from 1990 to 2021. We included morbidity and deaths due to neurological conditions, for which health loss is directly due to damage to the CNS or peripheral nervous system. We also isolated neurological health loss from conditions for which nervous system morbidity is a consequence, but not the primary feature, including a subset of congenital conditions (ie, chromosomal anomalies and congenital birth defects), neonatal conditions (ie, jaundice, preterm birth, and sepsis), infectious diseases (ie, COVID-19, cystic echinococcosis, malaria, syphilis, and Zika virus disease), and diabetic neuropathy. By conducting a sequela-level analysis of the health outcomes for these conditions, only cases where nervous system damage occurred were included, and YLDs were recalculated to isolate the non-fatal burden directly attributable to nervous system health loss. A comorbidity correction was used to calculate total prevalence of all conditions that affect the nervous system combined.FindingsGlobally, the 37 conditions affecting the nervous system were collectively ranked as the leading group cause of DALYs in 2021 (443 million, 95% UI 378–521), affecting 3·40 billion (3·20–3·62) individuals (43·1%, 40·5–45·9 of the global population); global DALY counts attributed to these conditions increased by 18·2% (8·7–26·7) between 1990 and 2021. Age-standardised rates of deaths per 100 000 people attributed to these conditions decreased from 1990 to 2021 by 33·6% (27·6–38·8), and age-standardised rates of DALYs attributed to these conditions decreased by 27·0% (21·5–32·4). Age-standardised prevalence was almost stable, with a change of 1·5% (0·7–2·4). The ten conditions with the highest age-standardised DALYs in 2021 were stroke, neonatal encephalopathy, migraine, Alzheimer's disease and other dementias, diabetic neuropathy, meningitis, epilepsy, neurological complications due to preterm birth, autism spectrum disorder, and nervous system cancer.InterpretationAs the leading cause of overall disease burden in the world, with increasing global DALY counts, effective prevention, treatment, and rehabilitation strategies for disorders affecting the nervous system are needed

Exploration of Dextran for Application as Corrosion Inhibitor for Steel in Strong Acid Environment: Effect of Molecular Weight, Modification, and Temperature on Efficiency

Sorour, Ahmad A/0000-0003-4664-3856; OBOT, IME BASSEY/0000-0002-2700-9529; Solomon, Moses/0000-0002-3251-8846; Umoren, Saviour/0000-0002-8564-4897WOS: 000442706600061PubMed: 30059617The possibility of utilizing dextran as a green corrosion inhibitor for steel in strong acid environment was explore using weight loss, electrochemical (electrochemical impedance spectroscopy (EIS), electrochemical frequency modulation (EFM), potentiodynamic polarization (PDP), and linear polarization (LPR)) supported with surface analysis via scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS) techniques. The effect of molecular weight, temperature, and modification on the inhibition efficiency of dextran was also studied. Results from all the applied techniques reveal that dextran exhibit moderate anticorrosion property toward St37-2 steel dissolution in 15% H2SO4 solution. Dextran with molecular weight of 100 000-200 000 g/mol (Dex 1) exhibited the highest inhibition efficiency of 51.38% at 25 degrees C. Based on PDP results, dextran behaved as a mixed type corrosion inhibitor. Inhibition efficiency of dextran varies inversely with molecular weight but directly with temperature. Two modification approaches, namely incorporation of silver nanoparticles (AgNPs) into dextran matrices and combination with 1 mM KI were adopted to enhance the inhibition efficiency of dextran and the approaches proved effective. The protective capability of Dex 1 has been upgraded from 51.38% to 86.82% by infusion of AgNPs and to 94.21% by combination with KI at 25 degrees C. Results from the study on the effect of temperature reveals that Dex 1 + KI mixture could synergistically offer 99.4% protection to St37-2 steel in 15% H2SO4 environment at 60 degrees C. Surface analysis results confirm the presence of additives molecules on the studied metal surface. XPS results disclose that AgNPs are in oxide form while iodide ions are in the form of triiodide and pentaiodide ions on the metal surface. Modified dextran is a promising candidate for application as corrosion inhibitor in acid induced corrosive environment.King Fahd University of Petroleum and MineralsM.M.S. is thankful to the King Fahd University of Petroleum and Minerals for the offer of a postdoctoral research fellowship at the Center of Research Excellence in Corrosion. The authors are grateful to Mr. Muhammad Al-Saeed for assisting in the XPS experiments

Electrochemical Investigation of the Effect of Process Parameters on the Corrosion Behavior of Aluminum-Cladded Pressure Vessel Steel Using a Friction Stir Diffusion Cladding Process

Surface cladding and coatings are commonly used to protect structures against corrosion in corrosive environments. In this paper, electrochemical properties of friction stir diffusion cladded ASTM A516-70 with corrosion-resistant aluminum alloy grade 5052 are studied. The effect of process parameters, tool rotational and traverse speeds on the corrosion behavior of produced cladded steels was comparatively assessed. Electrochemical analyses revealed that the cladded steel sample provided good corrosion protection performance in comparison with the un-cladded steel substrate following an immersion test of up to 21 days in 3.5% NaCl medium. Increasing the tool traverse speed was found to negatively affect the corrosion resistance. Optimum parameters for the selected cladding system were found to be a 500 rpm tool rotational speed, and a 50 mm/min tool traverse speed for protection against general corrosion. Meanwhile, higher traverse speed demonstrated stable passivation behavior and, therefore, lower propensity for pitting localized corrosion. Post characterization of the exposed area indicated that tool shoulder marks were favorable spots for the accumulation of corrosion products

Corrosion effect, constraint and path orientation estimated in cracked gas turbine blade

International audienceThe severe damage of gas turbine is due to the failure of the blade, in which the occurrence of a serious pitting occurred on the blade surfaces was evidence of fatigue marks in the fracture surface. This paper deals with the effect of semi-elliptical crack propagation on the crack path using a basic approach in predicting crack paths, namely, incremental methods. The crack position was chosen at the node coordinate where we have the maximum principal stresses. In this node, we have created a semi-elliptical crack and we have compared the results with the Stress Intensity Factors and T-stress values. The local fracture criterion of the maximum average tangential stress in the vicinity of fracture process zone including two terms of the Williams series solution for the mixed mode I/II loading has been used for predicting the angle of surface crack growth. The volumetric method (VM) for the compression-sensitive materials is described by a linear combination of the effective stress and the effective stress intensity factor. The results of our finite element computations based on a two-parameter fracture mechanics formulation showed that the T-stress has significant effects on the crack path