Decolourisation and degradation of reactive blue 2 by sulphate reducing bacteria (SRB) and zero valent iron in a biosulphidogenic reactor

This work was performed to determine the influence of heat treatment on sewage sludge and addition of zero valent iron (ZVI) on the degradation and decolourisation of an anthraquinone dye, reactive blue 2 (RB 2). A consortium of sulphate reducing bacteria (SRB) in a biosulphidogenic batch reactor with biodigester sludge was used. The latter supplied carbon and augmenting microorganisms. Reactors with heat treated sludge were outperformed by those with unheated sludge for the larger part of the reactor life span. A 75% decolourisation efficiency was achieved within 24 h of inoculation when 4 g ZVI/l were added in an SRB reactor with unheated sludge as opposed to 59% colour removal after four days in the same reactor without ZVI. However, decolourisation was also noted in the presence of ZVI alone, indicating existence of chemical reaction between ZVI and RB 2.Key words: Decolourisation, degradation, reactive blue 2, zero valent iron, sulphate reducing bacteria, sulphidogenic

Biomass Explosion Residue Analysis

On account of its greenhouse gas advantages there is increasing use of pulverized biomass in power generation. However, there is little information on the combustion properties of pulverized biomass and on the explosion hazards they create in the mills, dust conveyor systems and biomass storage silos. This work uses the ISO 1 m3 dust explosion equipment to study the explosion properties and combustion characteristics of pulverized biomass dust clouds. An unreported feature of this apparatus is that in rich concentrations only about half the dust injected is burned in the explosion. This work was undertaken to try to understand, through measuring the mass and composition of the debris at the end of the explosion, why all the pulverized biomass injected did not burn and the consequences for the measured parameters of flame speed, Pmax and Kst. One possible explanation of the results is that the residue material was formed from biomass dust blown ahead of the flame by the explosion induced wind and deposited on the vessel wall, where it was compressed as the pressure increased in the vessel. The flame side underwent flame impingement pyrolysis and the metal side was heated and compressed in the explosion but not burned. This was supported by photographic and pressure decay data that indicated the presence of a “cake” of dust being formed on the wall of the vessel. The results also show that the overpressures remain high for very rich equivalence ratios of up to 6. The reactivity of biomass was higher than coal for the two types of biomass investigated. No rich combustion limit was found. This challenges the general industry assumption that operating in very rich conditions in mills is safe. An explanation is proposed for the high peak pressures under rich conditions

Congenital Nephrotic Syndrome in IL7Rα-SCID: A Rare Feature of Maternofetal Graft-Versus-Host Disease

info:eu-repo/semantics/publishedVersio

The recognition of collagen and triple-helical toolkit peptides by MMP-13: sequence specificity for binding and cleavage.

Remodeling of collagen by matrix metalloproteinases (MMPs) is crucial to tissue homeostasis and repair. MMP-13 is a collagenase with a substrate preference for collagen II over collagens I and III. It recognizes a specific, well-known site in the tropocollagen molecule where its binding locally perturbs the triple helix, allowing the catalytic domain of the active enzyme to cleave the collagen α chains sequentially, at Gly(775)-Leu(776) in collagen II. However, the specific residues upon which collagen recognition depends within and surrounding this locus have not been systematically mapped. Using our triple-helical peptide Collagen Toolkit libraries in solid-phase binding assays, we found that MMP-13 shows little affinity for Collagen Toolkit III, but binds selectively to two triple-helical peptides of Toolkit II. We have identified the residues required for the adhesion of both proMMP-13 and MMP-13 to one of these, Toolkit peptide II-44, which contains the canonical collagenase cleavage site. MMP-13 was unable to bind to a linear peptide of the same sequence as II-44. We also discovered a second binding site near the N terminus of collagen II (starting at helix residue 127) in Toolkit peptide II-8. The pattern of binding of the free hemopexin domain of MMP-13 was similar to that of the full-length enzyme, but the free catalytic subunit bound none of our peptides. The susceptibility of Toolkit peptides to proteolysis in solution was independent of the very specific recognition of immobilized peptides by MMP-13; the enzyme proved able to cleave a range of dissolved collagen peptides.This work was supported by a British Heart Foundation programme grant, RG/009/003/27122, and peptide synthesis, by grants from Medical Research Council and Wellcome Trust.This is the author accepted manuscript. The final version can be found on the publisher's website at: http://www.jbc.org/content/early/2014/07/09/jbc.M114.58344

The CDKN2A G500 Allele Is More Frequent in GBM Patients with No Defined Telomere Maintenance Mechanism Tumors and Is Associated with Poorer Survival

Prognostic markers for glioblastoma multiforme (GBM) are important for patient management. Recent advances have identified prognostic markers for GBMs that use telomerase or the alternative lengthening of telomeres (ALT) mechanism for telomere maintenance. Approximately 40% of GBMs have no defined telomere maintenance mechanism (NDTMM), with a mixed survival for affected individuals. This study examined genetic variants in the cyclin-dependent kinase inhibitor 2A (CDKN2A) gene that encodes the p16INK4a and p14ARF tumor suppressors, and the isocitrate dehydrogenase 1 (IDH1) gene as potential markers of survival for 40 individuals with NDTMM GBMs (telomerase negative and ALT negative by standard assays), 50 individuals with telomerase, and 17 individuals with ALT positive tumors. The analysis of CDKN2A showed NDTMM GBMs had an increased minor allele frequency for the C500G (rs11515) polymorphism compared to those with telomerase and ALT positive GBMs (p = 0.002). Patients with the G500 allele had reduced survival that was independent of age, extent of surgery, and treatment. In the NDTMM group G500 allele carriers had increased loss of CDKN2A gene dosage compared to C500 homozygotes. An analysis of IDH1 mutations showed the R132H mutation was associated with ALT positive tumors, and was largely absent in NDTMM and telomerase positive tumors. In the ALT positive tumors cohort, IDH1 mutations were associated with a younger age for the affected individual. In conclusion, the G500 CDKN2A allele was associated with NDTMM GBMs from older individuals with poorer survival. Mutations in IDH1 were not associated with NDTMM GBMs, and instead were a marker for ALT positive tumors in younger individuals

Corporate governance and financial constraints on strategic turnarounds

The paper extends the Robbins and Pearce (1992) two-stage turnaround response model to include governance factors. In addition to the retrenchment and recovery, the paper proposes the addition of a realignment stage, referring specifically to the re-alignment of expectations of principal and agent groups. The realignment stage imposes a threshold that must be crossed before the retrenchment and hence recovery stage can be entered. Crossing this threshold is problematic to the extent that the interests of governance-stakeholder groups diverge in a crisis situation. The severity of the crisis impacts on the bases of strategy contingent asset valuation leading to the fragmentation of stakeholder interests. In some cases the consequence may be that management are prevented from carrying out turnarounds by governance constraints. The paper uses a case study to illustrate these dynamics, and like the Robbins and Pearce study, it focuses on the textile industry. A longitudinal approach is used to show the impact of the removal of governance constraints. The empirical evidence suggests that such financial constraints become less serious to the extent that there is a functioning market for corporate control. Building on governance research and turnaround literature, the paper also outlines the general case necessary and sufficient conditions for successful turnarounds

Hematopoietic Cell Transplantation in Patients With Primary Immune Regulatory Disorders (PIRD): A Primary Immune Deficiency Treatment Consortium (PIDTC) Survey.

Primary Immune Regulatory Disorders (PIRD) are an expanding group of diseases caused by gene defects in several different immune pathways, such as regulatory T cell function. Patients with PIRD develop clinical manifestations associated with diminished and exaggerated immune responses. Management of these patients is complicated; oftentimes immunosuppressive therapies are insufficient, and patients may require hematopoietic cell transplant (HCT) for treatment. Analysis of HCT data in PIRD patients have previously focused on a single gene defect. This study surveyed transplanted patients with a phenotypic clinical picture consistent with PIRD treated in 33 Primary Immune Deficiency Treatment Consortium centers and European centers. Our data showed that PIRD patients often had immunodeficient and autoimmune features affecting multiple organ systems. Transplantation resulted in resolution of disease manifestations in more than half of the patients with an overall 5-years survival of 67%. This study, the first to encompass disorders across the PIRD spectrum, highlights the need for further research in PIRD management

Friction and wear phenomena of vegetable oil based lubricants with additives at severe sliding wear conditions

The tribological responses of palm oil and soybean oil, combined with two commercial antiwear additives (zinc dialkyl dithiophosphate and boron compound), were investigated at a lubricant temperature of 100 °C and under severe contact conditions in a reciprocating sliding contact. The friction coefficient of palm oil with zinc dialkyl dithiophosphate was closest to the commercial mineral engine oil, with a 2% difference. The soybean oil with zinc dialkyl dithiophosphate produced a 57% improvement in wear resistance compared to its pure oil state. The existence of boron nitride in vegetable oils was only responsive in reduction of wear rather than friction. The response of commercial antiwear additives with vegetable oils showed a potential for the future improvement in the performance of vegetable oils