Effect of long periods of corrosion on the fatigue lifetime of offshore mooring chain steel

R4-grade mooring chain steel specimens were subjected to alternating phases of saltwater corrosion and air fatigue to replicate seasonal load variations on chains in service. No significant difference in fatigue lifetimes was registered between precorroded specimens subjected to continuous fatigue and those periodically interrupted by phases of accelerated corrosion. Moreover, eight months of natural corrosion of specimens with fatigue cracks did not have a large effect on their remaining fatigue lifetimes. Retardation of fatigue crack growth by crack tip blunting from corrosion is deemed unlikely based on observations from the current work and the literature. Corrosion accelerated by anodic polarization is demonstrated to be unsuitable for replicating natural corrosion of fatigue cracks.publishedVersio

Influence of Annular Dynamics and Material Behavior in Finite Element Analysis of Barlow’s Mitral Valve Disease

Barlow’s disease affects the entire mitral valve apparatus, by altering several of the fundamental mechanisms in the mitral valve which ensures unidirectional blood flow between the left atrium and the left ventricle. In this paper, a finite element model of a patient diagnosed with Barlow’s disease with patient-specific geometry and boundary conditions is presented. The geometry and boundary conditions are extracted from the echocardiographic assessment of the patient prior to surgery. Material properties representing myxomatous, healthy human and animal mitral valves are implemented and computed response are compared with each other and the echocardiographic images of the patient. This study shows that the annular dilation observed in Barlow’s patients controls several aspects of the mitral valve behavior during ventricular systole. The coaptation of the leaflets is observed to be highly dependent on annular dilation, and the coaptation area reduces rapidly at the onset of mitral regurgitation. Furthermore, the leaflet material implementation is important to predict lack of closure in the FE model correctly. It was observed that using healthy human material parameters in the Barlow’s diseased FE geometry gave severe lack of closure from the onset of mitral regurgitation, while myxomatous material properties showed a more physiological leakage.publishedVersio

Finite element analysis of mitral valve annuloplasty in Barlow's disease

Barlow’s Disease affects the entire mitral valve apparatus causing mitral regurgitation. Standard annuloplasty procedures lead to an average of 55% annular area reduction of the end diastolic pre-operative annular area in Barlow’s diseased valves. Following annular reduction, mitral valvuloplasty may be needed, usually with special focus on the posterior leaflet. An in silico pipeline to perform annuloplasty by utilizing the pre- and -postoperative 3D echocardiographic recordings was developed. Our objective was to test the hypothesis that annuloplasty ring sizes based on a percentage (10%–25%) decrease of the pre-operative annular area at end diastole can result in sufficient coaptation area for the selected Barlow’s diseased patient. The patient specific mitral valve geometry and finite element model were created from echocardiography recordings. The post-operative echocardiography was used to obtain the artificial ring geometry and displacements, and the motion of the papillary muscles after surgery. These were used as boundary conditions in our annuloplasty finite element analyses. Then, the segmented annuloplasty ring was scaled up to represent a 10%, 20% and 25% reduction of the pre-operative end diastolic annular area and implanted to the end diastolic pre-operative finite element model. The pre-operative contact area decrease was shown to be dependent on the annular dilation at late systole. Constraining the mitral valve from dilating excessively can be sufficient to achieve proper coaptation throughout systole. The finite element analyses show that the selected Barlow’s diseased patient may benefit from an annuloplasty ring with moderate annular reduction alone.publishedVersio

In silico analysis provides insights for patient-specific annuloplasty in Barlow’s disease

Objective To predict the required mitral annular area reduction in patients with Barlow's disease to obtain a predefined leaflet area index by a novel in silico modeling method. Methods Three-dimensional echocardiography was used to create patient-specific mitral valve models of 8 patients diagnosed with Barlow's disease and bileaflet prolapse preoperatively. Six patients were also studied postoperatively in a finite element framework, to quantify the optimal coaptation area index. For the patient-specific finite element analyses, realistic papillary muscle and annular motion are incorporated, also for the in silico annuloplasty analyses. The annuloplasty ring size is reduced moderately until the optimal coaptation area index is achieved for each patient. Results The mean mitral annular area at end-diastole was reduced by 58 ± 7% postoperatively (P < .001), resulting in a postoperative coaptation area index of 20 ± 5%. To achieve the same coaptation area index with moderate annular reductions and no leaflet resection the annular reduction was 31 ± 6% (P < .001). Conclusions In silico analysis in selected patients diagnosed with Barlow's disease demonstrates that annuloplasty with only moderate annular reduction may be sufficient to achieve optimal coaptation as compared to conventional surgical procedures.publishedVersio

Mechanical behavior and collagen structure of degenerative mitral valve leaflets and a finite element model of primary mitral regurgitation

Degenerative mitral valve disease is the main cause of primary mitral regurgitation with two phenotypes: fibroelastic deficiency (FED) often with localized myxomatous degeneration and diffuse myxomatous degeneration or Barlow’s disease. Myxomatous degeneration disrupts the microstructure of the mitral valve leaflets, particularly the collagen fibers, which affects the mechanical behavior of the leaflets. The present study uses biaxial mechanical tests and second harmonic generation microscopy to examine the mechanical behavior of Barlow and FED tissue. Three tissue samples were harvested from a FED patient and one sample is from a Barlow patient. Then we use an appropriate constitutive model by excluding the collagen fibers under compression. Finally, we built an FE model based on the echocardiography of patients diagnosed with FED and Barlow and the characterized material model and collagen fiber orientation. The Barlow sample and the FED sample from the most affected segment showed different mechanical behavior and collagen structure compared to the other two FED samples. The FE model showed very good agreement with echocardiography with 2.02 ± 1.8 mm and 1.05 ± 0.79 mm point-to-mesh distance errors for Barlow and FED patients, respectively. It has also been shown that the exclusion of collagen fibers under compression provides versatility for the material model; it behaves stiff in the belly region, preventing excessive bulging, while it behaves very softly in the commissures to facilitate folding.publishedVersio

Mode I stress intensity factors for semi-elliptical fatigue cracks in curved round bars

Some cyclically loaded components such as mooring chains can develop fatigue cracks in locations where the shape of the part is equivalent to that of a curved or bent round bar. Here we consider a semi-elliptical crack growing from the surface of a curved round bar. This geometry can for example represent a chain link segment with a crack located at its inner- or outer radius. The surface crack can be either almond shaped, sickle shaped or straight-fronted. Stress intensity factors (SIFs) over the fronts of such crack geometries are in the present work investigated for several elementary mode I stress distributions. Finite element analysis and linear elastic fracture mechanics methods are used to develop semi-analytical solutions for the SIF at any point on the crack front. Effects of relative bar curvature on numerical results are demonstrated. Relative to otherwise identical cracks in straight bars, SIFs for cracks in the curved bars considered here are found to differ by up to 8%. With an offshore mooring chain model as a case example, the estimation of SIFs for cracks in a complex residual stress field is furthermore demonstrated using a cubic polynomial stress approximation

Cyclic behavior and strain energy-based fatigue damage analysis of mooring chains high strength steel

This study investigates the low-cycle fatigue behavior of mooring chains high-strength steel grade R4 under different strain amplitudes and strain ratios at room temperature. A fatigue test program has been carried out on small low cycle fatigue specimens cut from large mooring chains. The experimental results characterize the cyclic stress-strain relationship, the mean stress relaxation behavior, and the cyclic plasticity parameters of the material. Strain energy density is correlated with fatigue life through a simple power-law expression and very well represented by BasquinCoffin-Mansion relationship. Further, a non-linear elastic-plastic material model is calibrated to the experimental stress-strain curves and used for the estimation of energy dissipation in the specimens under applied cyclic loads. The predicted fatigue life using the calibrated material parameters demonstrates a close agreement with the experimental fatigue life. Numerical simulations are carried out to analyze local plastic straining and assess crack initiation at the pit site of corroded mooring chains considering the multiaxial stress state. An energy-based approach is employed to estimate the number of cycles needed for a crack to initiate from an existing corrosion pit

Experimental and numerical study of mooring chain residual stresses and implications for fatigue life

Residual stresses in large mooring chains were measured for the first time in this study. Two measurement techniques were employed (neutron diffraction and hole drilling). Elastic-plastic finite element simulation of the proof loading was conducted, and the computed residual stresses were compared to the experimental measurements. Further, the cyclic plasticity of the material was taken into account to investigate residual stress redistribution caused by introduction of corrosion pits and cyclic service loads. A critical damage parameter was employed to estimate fatigue crack initiation life of corroded mooring chains subjected to various service load levels considering the effect of residual stresses

An experimental and numerical study on the volume change of particle-filled elastomers in various loading modes

Laboratory tests show that there is a pronounced difference in the volumetric response between uniaxial tension and confined axial compression loading for commercial particle-filled hydrogenated nitrile butadiene rubber (HNBR) and fluoroelastomer (FKM) compounds. In uniaxial tension (UT), a volume increase of 5% and 20% for the HNBR and FKM respectively was present for a hydrostatic stress of less than 6 MPa, in addition, both compounds showed a clear hysteresis loop in the hydrostatic stress - volume ratio space. For confined axial compression (CAC) tests, on the other hand, the materials reached a 6–7% volume change for a hydrostatic stress of 140 MPa, and an elastic behavior was seen. This loading mode dependence of the volumetric response has severe implications for the constitutive representation of the materials. It is demonstrated that existing elastomer models, whereof many assume incompressible volumetric response, are unable to capture the behavior in both loading modes. To gain an increased understanding of the macroscopically obtained results, a tension in situ scanning electron microscopy study was performed. Matrix–particle debonding was observed to occur at the external surface of the materials, rendering a possible explanation for the loading mode dependent volumetric behavior. Finite element simulations of a single-particle model, incorporating a cylinder of matrix material with a spherical particle in its center, showed that the observed debonding can explain the experimental response of the materials in a qualitative manner