Electron cloud buildup and impedance effects on beam dynamics in the future circular e+e− collider and experimental characterization of thin TiZrV vacuum chamber coatings

The Future Circular Collider FCC-ee is a study toward a high luminosity electron-positron collider with a centre-of-mass energy from 91 GeV to 365 GeV. Due to the beam parameters and pipe dimensions, collective effects and electron cloud can be very critical aspects for the machine and can represent the main limitations to its performance. An estimation of the electron cloud build up in the main machine components and an impedance model are required to analyze the induced instabilities and to find solutions for their mitigation. Special attention has been given to the resistive wall impedance associated with a layer of nonevaporable getter (NEG) coating on the vacuum chamber required for electron cloud mitigation. The studies presented in this paper will show that minimizing the thickness of this coating layer is mandatory to increase the single bunch instability thresholds in the proposed lepton collider at 45.6 GeV. For this reason, NEG thin films with thicknesses below 250 nm have been investigated by means of numerical simulations to minimize the resistive wall impedance. In parallel, an extensive measurement campaign was performed at CERN to characterize these thin films, with the purpose of finding the minimum effective thickness satisfying vacuum and electron cloud requirements

Force Distribution in a Granular Medium

We report on systematic measurements of the distribution of normal forces exerted by granular material under uniaxial compression onto the interior surfaces of a confining vessel. Our experiments on three-dimensional, random packings of monodisperse glass beads show that this distribution is nearly uniform for forces below the mean force and decays exponentially for forces greater than the mean. The shape of the distribution and the value of the exponential decay constant are unaffected by changes in the system preparation history or in the boundary conditions. An empirical functional form for the distribution is proposed that provides an excellent fit over the whole force range measured and is also consistent with recent computer simulation data.Comment: 6 pages. For more information, see http://mrsec.uchicago.edu/granula

Overview of the Alliance for Cellular Signaling

The Alliance for Cellular Signaling is a large-scale collaboration designed to answer global questions about signalling networks. Pathways will be studied intensively in two cells-B lymphocytes (the cells of the immune system) and cardiac myocytes-to facilitate quantitative modelling. One goal is to catalyse complementary research in individual laboratories; to facilitate this, all alliance data are freely available for use by the entire research community.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/62977/1/nature01304.pd

Capsid Antibodies to Different Adeno-Associated Virus Serotypes Bind Common Regions

Interactions between viruses and the host antibody immune response are critical in the development and control of disease, and antibodies are also known to interfere with the efficacy of viral vector-based gene delivery. The adeno-associated viruses (AAVs) being developed as vectors for corrective human gene delivery have shown promise in clinical trials, but preexisting antibodies are detrimental to successful outcomes. However, the antigenic epitopes on AAV capsids remain poorly characterized. Cryo-electron microscopy and three-dimensional image reconstruction were used to define the locations of epitopes to which monoclonal fragment antibodies (Fabs) against AAV1, AAV2, AAV5, and AAV6 bind. Pseudoatomic modeling showed that, in each serotype, Fabs bound to a limited number of sites near the protrusions surrounding the 3-fold axes of the T=1 icosahedral capsids. For the closely related AAV1 and AAV6, a common Fab exhibited substoichiometric binding, with one Fab bound, on average, between two of the three protrusions as a consequence of steric crowding. The other AAV Fabs saturated the capsid and bound to the walls of all 60 protrusions, with the footprint for the AAV5 antibody extending toward the 5-fold axis. The angle of incidence for each bound Fab on the AAVs varied and resulted in significant differences in how much of each viral capsid surface was occluded beyond the Fab footprints. The AAV-antibody interactions showed a common set of footprints that overlapped some known receptor-binding sites and transduction determinants, thus suggesting potential mechanisms for virus neutralization by the antibodies

Enhanced Polymeric Dielectrics through Incorporation of Hydroxyl Groups

We use simulations and experiments to delineate the mechanism by which the addition of a small number of polar −OH groups to a nonpolar polymer increases the static relative permittivity (or dielectric constant) by a factor of 2, but more importantly while keeping the dielectric loss in the frequency regime of interest to power electronics to less than 1%. Dielectric properties obtained from experiments on functionalized polyethylenes and polypropylenes as a function of −OH doping are in quantitative agreement with one another. Molecular dynamics simulations for the static relative permittivity of “dry” −OH functionalized polyethylene (in the absence of water) are apparently in quantitative agreement with experiments. However, these simulation results would further imply that there should be considerable dielectric loss beyond simulation time scales (>0.1 μs). Since there are minimal experimentally observed dielectric losses for times as short as a microsecond, we believe that a small amount of adsorbed water plays a critical role in this attenuated loss. We use simulations to derive the water concentration at saturation, and our results for this quantity are also in good agreement with experiments. Simulations of the static relative permittivity of PE–OH incorporating this quantity of hydration water are found to be in quantitative agreement with experiments when it is assumed that all the dipolar relaxations occur at time scales faster than 0.1 μ<i>s</i>. These results suggest that improved polymeric dielectric materials can be designed by including −OH groups on the chain, but the mechanism requires the presence of a stoichiometric quantity of hydration water

Infectious myonecrosis virus has a totivirus-like, 120-subunit capsid, but with fiber complexes at the fivefold axes

Infectious myonecrosis virus (IMNV) is an emerging pathogen of penaeid shrimp in global aquaculture. Tentatively assigned to family Totiviridae, it has a nonsegmented dsRNA genome of 7,560 bp and an isometric capsid of the 901-aa major capsid protein. We used electron cryomicroscopy and 3D image reconstruction to examine the IMNV virion at 8.0-Å resolution. Results reveal a totivirus-like, 120-subunit T = 1 capsid, 450 Å in diameter, but with fiber complexes protruding a further 80 Å at the fivefold axes. These protrusions likely mediate roles in the extracellular transmission and pathogenesis of IMNV, capabilities not shared by most other totiviruses. The IMNV structure is also notable in that the genome is centrally organized in five or six concentric shells. Within each of these shells, the densities alternate between a dodecahedral frame that connects the threefold axes vs. concentration around the fivefold axes, implying certain regularities in the RNA packing scheme