An experimental study of surface pressure fluctuations in a separating turbulent boundary layer

Measurements of streamwise velocity fluctuation and surface pressure fluctuation spectra and wavespeeds are reported for a well-documented separating turbulent boundary layer. Because a portion of the acoustic pressure fluctuations is the same across the nominally two-dimensional turbulent flow, it is possible to decompose two microphone signals and obtain directly the turbulent flow contributions to the surface pressure spectra. The rms surface pressure fluctuation p' and spectra phi(omega) increase through the adverse pressure gradient attached flow region and the detached flow zone and scale on the maximum turbulent shearing stress tau(M); p'/tau(M) increases to the detachment location and decreases downstream due to the rapid movement of the pressure-fluctuation-producing motions away from the wall after the beginning of intermittent backflow. At lower frequencies for the attached flow phi(omega) is approximately omega to the -0.7 while phi(omega) is approximately omega to the -3 at higher frequencies. After the beginning of intermittent backflow, phi(omega) varies with omega at low frequencies and omega to the -3 at high frequencies; farther downstream the lower frequency range varies with omega to the 2.4. The surface pressure fluctuation celerity for the attached flow increases with frequency and agrees with the semi-logarithmic overlap equation of Panton and Linebarger. After the beginning of the separation process, the wavespeed decreases because of the oscillation of the instantaneous wavespeed direction and the streamwise coherence decreases drastically

Understanding co-operative R&D activity: evidence from four European countries

This paper investigates co-operative research activity by firms using data from the 3rd Community Innovation Survey for four countries, France, Germany, Spain and the UK. We build on the Cassiman and Veugelers (CV) (2002) study of Belgian manufacturing firms, by incorporating information on the service sector, and considering the role of public support in affecting firms’ decisions to co-operate. Our results support those in CV, in that we find a positive relationship between the likelihood of undertaking co-operative R&D and both incoming knowledge spillovers and the extent to which firms find strategic methods important in appropriating the returns to innovative activity. We find that public support is positively related to the probability of undertaking co-operative agreements particularly with regard to the likelihood of co-operation with the research base. We find some evidence, in particular for Spain, that firms carry out co-operative R&D to overcome excessive perceived risks and financial constraints

Determination of the Telluric Water Vapor Absorption Correction for Astronomical Data Obtained from the Kuiper Airborne Observatory

The amount of telluric water vapor along the line of sight of the Kuiper Airborne Observatory telescope as obtained concommitantly on 23 flights is compared with the NASA-Ames Michelson interferometer and with the NOAA-Boulder radiometer. A strong correlation between the two determinations exists, and a method for computing the atmospheric transmission for a given radiometer reading is established

Numerical comparison of pipe-column-separation models

Results comparing six column-separation numerical models for simulating localized vapor cavities and distributed vaporous cavitation in pipelines are presented. The discrete vapor-cavity model (DVCM) is shown to be quite sensitive to selected input parameters. For short pipeline systems, the maximum pressure rise following column separation can vary markedly for small changes in wave speed, friction factor, diameter, initial velocity, length of pipe, or pipe slope. Of the six numerical models, three perform consistently over a broad number of reaches. One of them, the discrete gas-cavity model, is recommended for general use as it is least sensitive to input parameters or to the selected discretization of the pipeline. Three models provide inconsistent estimates of the maximum pressure rise as the number of reaches is increased; however, these models do give consistent results provided the ratio of maximum cavity size to reach volume is kept below 10%.Angus R. Simpson and Anton Bergan

The cosmic evolution of radio-AGN feedback to z=1

This paper presents the first measurement of the radio luminosity function of 'jet-mode' (radiatively-inefficient) radio-AGN out to z=1, in order to investigate the cosmic evolution of radio-AGN feedback. Eight radio source samples are combined to produce a catalogue of 211 radio-loud AGN with 0.5<z<1.0, which are spectroscopically classified into jet-mode and radiative-mode (radiatively-efficient) AGN classes. Comparing with large samples of local radio-AGN from the Sloan Digital Sky Survey, the cosmic evolution of the radio luminosity function of each radio-AGN class is independently derived. Radiative-mode radio-AGN show an order of magnitude increase in space density out to z~1 at all luminosities, consistent with these AGN being fuelled by cold gas. In contrast, the space density of jet-mode radio-AGN decreases with increasing redshift at low radio luminosities (L_1.4 < 1e24 W/Hz) but increases at higher radio luminosities. Simple models are developed to explain the observed evolution. In the best-fitting models, the characteristic space density of jet-mode AGN declines with redshift in accordance with the declining space density of massive quiescent galaxies, which fuel them via cooling of gas in their hot haloes. A time delay of 1.5-2 Gyr may be present between the quenching of star formation and the onset of jet-mode radio-AGN activity. The behaviour at higher radio luminosities can be explained either by an increasing characteristic luminosity of jet-mode radio-AGN activity with redshift (roughly as (1+z) cubed) or if the jet-mode radio-AGN population also includes some contribution of cold-gas-fuelled sources seen at a time when their accretion rate was low. Higher redshifts measurements would distinguish between these possibilities.Comment: Accepted for publication in MNRA

Constraints on radiative decay of the 17-keV neutrino from COBE Measurements

It is shown that, for a nontrivial radiative decay channel of the 17-keV neutrino, the photons would distort the microwave background radiation through ionization of the universe. The constraint on the branching ratio of such decays from COBE measurements is found to be more stringent than that from other considerations. The limit on the branching ratio in terms of the Compton $y$ parameter is $B_\gamma < 1.5 \times 10^{-7} ({\tau_\nu \over 10^{11} sec})^{0.45} ({y \over 10^{-3}})^{1.11} h^{-1}$ for an $\Omega=1, \Omega_b=0.1$ universe.Comment: 7 pages. (figures will be sent on request) (To appear in Phys. Rev. D.

The detection and photometric redshift determination of distant galaxies using SIRTF's Infrared Array Camera

We investigate the ability of the Space Infrared Telescope Facility's Infrared Array Camera to detect distant (z ~ 3)galaxies and measure their photometric redshifts. Our analysis shows that changing the original long wavelength filter specifications provides significant improvements in performance in this and other areas.Comment: 28 pages incl 12 figures; to appear in June 1999 PASP. Fig.12 replaced with corrected versio

Spectral Analysis for Matrix Hamiltonian Operators

In this work, we study the spectral properties of matrix Hamiltonians generated by linearizing the nonlinear Schr\"odinger equation about soliton solutions. By a numerically assisted proof, we show that there are no embedded eigenvalues for the three dimensional cubic equation. Though we focus on a proof of the 3d cubic problem, this work presents a new algorithm for verifying certain spectral properties needed to study soliton stability. Source code for verification of our comptuations, and for further experimentation, are available at http://www.math.toronto.edu/simpson/files/spec_prop_code.tgz.Comment: 57 pages, 22 figures, typos fixe

POWERLIB: SAS/IML Software for Computing Power in Multivariate Linear Models

The POWERLIB SAS/IML software provides convenient power calculations for a wide range of multivariate linear models with Gaussian errors. The software includes the Box, Geisser-Greenhouse, Huynh-Feldt, and uncorrected tests in the "univariate" approach to repeated measures (UNIREP), the Hotelling Lawley Trace, Pillai-Bartlett Trace, and Wilks Lambda tests in "multivariate" approach (MULTIREP), as well as a limited but useful range of mixed models. The familiar univariate linear model with Gaussian errors is an important special case. For estimated covariance, the software provides confidence limits for the resulting estimated power. All power and confidence limits values can be output to a SAS dataset, which can be used to easily produce plots and tables for manuscripts.