Unconventional Charge Ordering in Na0.70CoO2 below 300 K

We present the results of measurements of the dc-magnetic susceptibility chi(T) and the 23Na-NMR response of Na_{0.70}CoO_{2} at temperatures between 50 and 340 K. The chi(T) data suggest that for T > 75 K, the Co ions adopt an effective configuration of Co^{3.4+}. The 23Na-NMR response reveals pronounced anomalies near 250 and 295 K, but no evidence for magnetic phase transitions is found in chi(T). Our data suggest the onset of a dramatic change in the Co 3d-electron spin dynamics at 295 K. This process is completed at 230 K. Our results maybe interpreted as evidence for either a tendency to electron localization or an unconventional charge-density wave phenomenon within the cobalt oxide layer, CoO_2, 3d electron system near room temperature.Comment: 4 pages, 4 figures, re-submitted to Physical Review Letters. The manuscript has been revised following the recommendations of the referees. The discussion section contains substantial change

Plastic Flow in Two-Dimensional Solids

A time-dependent Ginzburg-Landau model of plastic deformation in two-dimensional solids is presented. The fundamental dynamic variables are the displacement field \bi u and the lattice velocity {\bi v}=\p {\bi u}/\p t. Damping is assumed to arise from the shear viscosity in the momentum equation. The elastic energy density is a periodic function of the shear and tetragonal strains, which enables formation of slips at large strains. In this work we neglect defects such as vacancies, interstitials, or grain boundaries. The simplest slip consists of two edge dislocations with opposite Burgers vectors. The formation energy of a slip is minimized if its orientation is parallel or perpendicular to the flow in simple shear deformation and if it makes angles of $\pm \pi/4$ with respect to the stretched direction in uniaxial stretching. High-density dislocations produced in plastic flow do not disappear even if the flow is stopped. Thus large applied strains give rise to metastable, structurally disordered states. We divide the elastic energy into an elastic part due to affine deformation and a defect part. The latter represents degree of disorder and is nearly constant in plastic flow under cyclic straining.Comment: 16pages, Figures can be obtained at http://stat.scphys.kyoto-u.ac.jp/index-e.htm

Lift, Drag and Thrust Measurement in a Hypersonic Impulse Facility

This paper reports the extension of the stress wave force balance to the measurement of forces on models which are non-axisymmetric or which have non-axisymmetric load distributions. Recent results are presented which demonstrate the performance of the stress wave force balance for drag measurement, for three-component force measurement and preliminary results for thrust measurement on a two-dimensional scramjet nozzle. In all cases, the balances respond within a few hundred microseconds

Development and external validation of risk scores for cardiovascular hospitalization and rehospitalization in patients with diabetes

Context Cardiovascular disease (CVD) is a common and costly reason for hospitalisation and re-hospitalisation among patients with type 2 diabetes. Objective This study aimed to develop and externally validate two risk prediction models for cardiovascular hospitalisation and cardiovascular re-hospitalisation. Design Two independent prospective cohorts. Setting The derivation cohort includes 4,704 patients with type 2 diabetes from 18 general practices in Cambridgeshire. The validation cohort comprises 1,121 patients with type 2 diabetes from post-trial follow-up data. Main Outcome Measure Cardiovascular hospitalisation over 2 years and cardiovascular re-hospitalisation after 90 days of the prior CVD hospitalisation. Results The absolute rate of cardiovascular hospitalisation and re-hospitalisation was 12.5% and 6.7% in the derivation cohort, and 16.3% and 7.0% in the validation cohort. Discrimination of the models was similar in both cohorts, with C statistics above 0.70, and excellent calibration of observed and predicted risks. Conclusion Two new prediction models that quantify risks of cardiovascular hospitalisation and re-hospitalisation have been developed and externally validated. They are based on a small number of clinical measurements that are available for patients with type 2 diabetes in many developed countries in primary care settings and could serve as the tools to screen the population at high risk of cardiovascular hospitalisation and re-hospitalisation

Stroke recovery in rats after 24h-delayed intramuscular neurotrophin-3 infusion

Objective Neurotrophin‐3 (NT3) plays a key role in the development and function of locomotor circuits including descending serotonergic and corticospinal tract axons and afferents from muscle and skin. We have previously shown that gene therapy delivery of human NT3 into affected forelimb muscles improves sensorimotor recovery after stroke in adult and elderly rats. Here, to move toward the clinic, we tested the hypothesis that intramuscular infusion of NT3 protein could improve sensorimotor recovery after stroke. Methods Rats received unilateral ischemic stroke in sensorimotor cortex. To simulate a clinically feasible time to treatment, 24 hours later rats were randomized to receive NT3 or vehicle by infusion into affected triceps brachii for 4 weeks using implanted catheters and minipumps. Results Radiolabeled NT3 crossed from the bloodstream into the brain and spinal cord in rodents with or without strokes. NT3 increased the accuracy of forelimb placement during walking on a horizontal ladder and increased use of the affected arm for lateral support during rearing. NT3 also reversed sensory impairment of the affected wrist. Functional magnetic resonance imaging during stimulation of the affected wrist showed spontaneous recovery of peri‐infarct blood oxygenation level–dependent signal that NT3 did not further enhance. Rather, NT3 induced neuroplasticity of the spared corticospinal and serotonergic pathways. Interpretation Our results show that delayed, peripheral infusion of NT3 can improve sensorimotor function after ischemic stroke. Phase I and II clinical trials of NT3 (for constipation and neuropathy) have shown that peripheral high doses are safe and well tolerated, which paves the way for NT3 as a therapy for stroke

Characterising wood properties for deployment of elite subtropical and tropical hardwoods.

Queensland has over 42,000 hectares of hardwood plantations, with 13,700 hectares currently managed for sawn timber and high-value products. Previously, a major impediment to expansion of the hardwood sawn timber and high-value products industry in Queensland was that improved varieties of the key subtropical and tropical species were not available for plantation establishment. Trees from earlier projects, such as Hardwoods Queensland and the Private Plantations Initiative, have now reached an age where selection for growth, form and wood properties is possible. The current project used non-destructive and destructive wood evaluation techniques to characterise the timber quality of 443 subtropical and tropical Corymbia and Eucalyptus trees in these plantings, allowing selection of trees with the best growth, form and wood properties under Queensland conditions. Ecological assessments were also undertaken in the Corymbia plantings to identify germplasm that posed minimal risk of gene flow into native forests. Elite varieties are being fast tracked for deployment in Queensland using economical systems for germplasm capture and nursery production. The project identified and captured 108 new Corymbia and Eucalyptus varieties that can be grown with confidence in Queensland over a shorter rotation length and which produce well-characterised high-quality hardwood timber

Lessons Learned in Risk Management on NCSX

The National Compact Stellarator Experiment (NCSX) was designed to test physics principles of an innovative stellarator design developed by the Princeton Plasma Physics Laboratory and Oak Ridge National Laboratory. Construction of some of the major components and sub-assemblies was completed, but the estimated cost and schedule for completing the project grew as the technical requirements and risks became better understood, leading to its cancellation in 2008. The project's risks stemmed from its technical challenges, primarily the complex component geometries and tight tolerances that were required. The initial baseline, established in 2004, was supported by a risk management plan and risk-based contingencies, both of which proved to be inadequate. Technical successes were achieved in the construction of challenging components and subassemblies, but cost and schedule growth was experienced. As part of an effort to improve project performance, a new risk management program was devised and implemented in 2007-08. It led to a better understanding of project risks, a sounder basis for contingency estimates, and improved management tools. Although the risks ultimately were unacceptable to the sponsor, valuable lessons in risk management were learned through the experiences with the NCSX project

Schwinger-Keldysh Approach to Disordered and Interacting Electron Systems: Derivation of Finkelstein's Renormalization Group Equations

We develop a dynamical approach based on the Schwinger-Keldysh formalism to derive a field-theoretic description of disordered and interacting electron systems. We calculate within this formalism the perturbative RG equations for interacting electrons expanded around a diffusive Fermi liquid fixed point, as obtained originally by Finkelstein using replicas. The major simplifying feature of this approach, as compared to Finkelstein's is that instead of $N \to 0$ replicas, we only need to consider N=2 species. We compare the dynamical Schwinger-Keldysh approach and the replica methods, and we present a simple and pedagogical RG procedure to obtain Finkelstein's RG equations.Comment: 22 pages, 14 figure

Fully differential W' production and decay at next-to-leading order in QCD

We present the fully differential production and decay of a W' boson, with arbitrary vector and axial-vector couplings, to any final state at next-to-leading order in QCD. We demonstrate a complete factorization of couplings at next-to-leading order in both the partial width of the W' boson, and in the full two-to-two cross section. We provide numerical predictions for the contribution of a W' boson to single-top-quark production, and separate results based on whether the mass of the right-handed neutrino (nu_R) is light enough for the leptonic decay channel to be open. The single-top-quark analysis will allow for an improved direct W' mass limit of 525-550 GeV using data from run I of the Fermilab Tevatron. We propose a modified tolerance method for estimating parton distribution function uncertainties in cross sections.Comment: 23 pages, revtex3, 13 ps fig