263 research outputs found
Recommended from our members
Ultrafast terawatt laser sources for high-field particle acceleration and short wavelength generation
The Laser Sources working group concerned itself with recent advances in and future requirements for the development of laser sources relevant to high-energy physics (HEP) colliders, small scale accelerators, and the generation of short wave-length radiation. We heavily emphasized pulsed terawatt peak power laser sources for several reasons. First, their development over the past five years has been rapid and multi-faceted, and has made relativistic light intensity available to the advanced accelerator community, as well as the wider physics community, for the first time. Secondly, they have strongly impacted plasma-based accelerator research over the past two years, producing the first experimental demonstrations of the laser wakefield accelerator (LWFA) in both its resonantly-driven and self-modulated forms. Thirdly, their average power and wall-plug efficiency currently fall well short of projected requirements for future accelerators and other high average power applications, but show considerable promise for improving substantially over the next few years. A review of this rapidly emerging laser technology in the context of advanced accelerator research is therefore timely
Recommended from our members
Comparison of amplified spontaneous emission pulse cleaners for use in chirped pulse amplification front end lasers
We compare various schemes for removing amplified spontaneous emission from seed laser pulses. We focus on compact schemes that are compatible with fiber laser front end systems with pulse energies in the 10nJ-1{micro}J range and pulse widths in the 100fs-10ps range. Pre-pulse contrast ratios greater than 10{sup 9} have been measured
Probing impulsive strain propagation with x-ray pulses
Pump-probe time-resolved x-ray diffraction of allowed and nearly forbidden
reflections in InSb is used to follow the propagation of a coherent acoustic
pulse generated by ultrafast laser-excitation. The surface and bulk components
of the strain could be simultaneously measured due to the large x-ray
penetration depth. Comparison of the experimental data with dynamical
diffraction simulations suggests that the conventional model for impulsively
generated strain underestimates the partitioning of energy into coherent modes.Comment: 4 pages, 2 figures, LaTeX, eps. Accepted for publication in Phys.
Rev. Lett. http://prl.aps.or
Recommended from our members
Scaling to Ultra-High Intensities by High-Energy Petawatt Beam Combining
The output pulse energy from a single-aperture high-energy laser amplifier (e.g. fusion lasers such as NIF and LMJ) are critically limited by a number of factors including optical damage, which places an upper bound on the operating fluence; parasitic gain, which limits together with manufacturing costs the maximum aperture size to {approx} 40-cm; and non-linear phase effects which limits the peak intensity. For 20-ns narrow band pulses down to transform-limited sub-picosecond pulses, these limiters combine to yield 10-kJ to 1-kJ maximum pulse energies with up to petawatt peak power. For example, the Advanced Radiographic Capability (ARC) project at NIF is designed to provide kilo-Joule pulses from 0.75-ps to 50-ps, with peak focused intensity above 10{sup 19} W/cm{sup 2}. Using such a high-energy petawatt (HEPW) beamline as a modular unit, they discuss large-scale architectures for coherently combining multiple HEPW pulses from independent apertures, called CAPE (Coherent Addition of Pulses for Energy), to significantly increase the peak achievable focused intensity. Importantly, the maximum intensity achievable with CAPE increases non-linearly. Clearly, the total integrated energy grows linearly with the number of apertures N used. However, as CAPE combines beams in the focal plane by increasing the angular convergence to focus (i.e. the f-number decreases), the foal spot diameter scales inversely with N. Hence the peak intensity scales as N{sup 2}. Using design estimates for the focal spot size and output pulse energy (limited by damage fluence on the final compressor gratings) versus compressed pulse duration in the ARC system, Figure 2 shows the scaled focal spot intensity and total energy for various CAPE configurations from 1,2,4, ..., up to 192 total beams. They see from the fixture that the peak intensity for event modest 8 to 16 beam combinations reaches the 10{sup 21} to 10{sup 22} W/cm{sup 2} regime. With greater number of apertures, or with improvements to the focusability of the individual beams, the maximum peak intensity can be increased further to {approx} 10{sup 24} W/cm{sup 2}. Lastly, an important feature of the CAPE architecture is the ability to coherently combine beams to produce complex spatio-temporal intensity distributions for laser-based accelerators (e.g. all-optical electron injection and acceleration) and high energy density science applications such as fast ignition
Recommended from our members
Pulsed Laser-Based X-Ray Sources for Rapid-Cool DT Layer Characterization
Ignition targets for the National Ignition Facility (NIF) will contain a cryogenically cooled {approx} 75 {micro}m-thick deuterium/tritium (DT) ice layer surrounded by a {approx} 150 {micro}m-thick beryllium (Be) shell [1]. Ignition target design optimization depends sensitively on the achievable inner surface quality of the ice layer and on the pressure of the DT gas inside the ice, which is determined by the temperature of the ice. The inner ice layer surface is smoothest at temperatures just below the DT ice/liquid/gas triple point (3T), but current ignition target designs require central gas pressures of 0.3 mg/cm3, corresponding to an ice layer temperature 1.5 K below the triple point (3T-1.5). At these lower temperatures, the ice layer quality degrades due to the formation of cracks and other features
Ultrafast changes in lattice symmetry probed by coherent phonons
The electronic and structural properties of a material are strongly
determined by its symmetry. Changing the symmetry via a photoinduced phase
transition offers new ways to manipulate material properties on ultrafast
timescales. However, in order to identify when and how fast these phase
transitions occur, methods that can probe the symmetry change in the time
domain are required. We show that a time-dependent change in the coherent
phonon spectrum can probe a change in symmetry of the lattice potential, thus
providing an all-optical probe of structural transitions. We examine the
photoinduced structural phase transition in VO2 and show that, above the phase
transition threshold, photoexcitation completely changes the lattice potential
on an ultrafast timescale. The loss of the equilibrium-phase phonon modes
occurs promptly, indicating a non-thermal pathway for the photoinduced phase
transition, where a strong perturbation to the lattice potential changes its
symmetry before ionic rearrangement has occurred.Comment: 14 pages 4 figure
Adenoviral gene transfer of interleukin 12 into tumors synergizes with adoptive T cell therapy both at the induction and effector level
Tumors infected with a recombinant defective adenovirus expressing interleukin 12 (IL-12) undergo regression, associated with a cytotoxic T lymphocyte (CTL)-mediated antitumor immune response. In the present study we generated anti-CT26 CTLs by short-term coculture of CT26 cells and lymph node cells obtained from mice harboring subcutaneous CT26 tumors injected with an adenoviral vector expressing IL-12 (AdCMVIL-12), control adenovirus (AdCMVlacZ), or saline. Regression of small intrahepatic CT26 tumors in unrelated syngeneic animals was achieved with CTLs derived from mice whose subcutaneous tumors had been injected with AdCMVIL-12 but not with CTLs from the other two control groups. The necessary and sufficient effector cell population for adoptive transfer consisted of CD8+ T cells that showed anti-CT26 specificity partly directed against the AH1 epitope presented by H-2Ld. Interestingly, treatment of a subcutaneous tumor nodule with AdCMVIL-12, combined with intravenous adoptive T cell therapy with short-term CTL cultures, had a marked synergistic effect against large, concomitant live tumors. Expression of IL-12 in the liver in the vicinity of the hepatic tumor nodules, owing to spillover of the vector into the systemic circulation, appeared to be involved in the increased in vivo antitumor activity of injected CTLs. In addition, adoptive T cell therapy improved the outcome of tumor nodules transduced with suboptimal doses of AdCMVIL-12. Our data provide evidence of a strong synergy between gene transfer of IL-12 and adoptive T cell therapy. This synergy operates both at the induction and effector phases of the CTL response, thus providing a rationale for combined therapeutic strategies for human malignancies
Recommended from our members
Laser wakefield excitation and measurement by femtosecond longitudinal interferometry
Plasma density oscillations (Langmuir waves) in the wake of an intense (I{sub peak} {approximately} 3 {times} 10{sup 17}W/cm{sup 2}) laser pulse (100 fs) are measured with ultrafast time resolution using a longitudinal interferometric technique. Phase shifts consistent with large amplitude ({delta}n{sub e}/n{sub e} {approximately} 1) density waves at the electron plasma frequency were observed in a fully tunnel-ionized He plasma, corresponding to longitudinal electric fields of {approximately} 10 GV/m. Strong radial ponderomotive forces enhance the density oscillations. As this technique utilizes a necessary component of any laser-based plasma accelerator, it promises to be a powerful tool for on-line monitoring and control of future plasma-based particle accelerators
Recommended from our members
Ultra-fast Laser Synthesis of Nanopore Arrays in Silicon for Bio-molecule Separation and Detection
We demonstrate that interference of ultra-fast pulses of laser light can create regular patterns in thin silicon membranes that are compatible with the formation of a uniform array of nanopores. The spacing and size of these pores can be tuned by changing the laser energy, wavelength and number of ultra-short pulses. Short pulses and wavelengths ({approx}550 nm and smaller) are needed to define controllable nanoscale features in silicon. Energy must be localized in time and space to produce the etching, ablation or amorphization effects over the {approx}100 nm length scales appropriate for definition of single pores. Although in this brief study pattern uniformity was limited by laser beam quality, a complementary demonstration reported here used continuous-wave interferometric laser exposure of photoresist to show the promise of the ultra-fast approach for producing uniform pore arrays. The diameters of these interferometrically-defined features are significantly more uniform than the diameters of pores in state-of-the-art polycarbonate track etch membranes widely used for molecular separations
- …