Simulating the Torsional Vibration Signal of Two-Stroke Marine Diesel Engine with Normal Firing and Mis-Firing

The article presented the modelling of torsional vibration signal of marine diesel engine, MAN B&W 6S46MC-C7, installed in general cargo ships 34000 DWT, built at Pha Rung Shipyard (Vietnam). The authors imitated the torsional vibration signal, based on the established signal modelling when diesel engine works normal firing and mis-firing state, according to the Class Regulation Rules for new building steel hull ships when calculating and measuring the torsional vibration of marine diesel propulsion shaft-line system. The authors used Matlab software to imitate the torsional vibration signals in the real time domain and then converted them into the frequency order by Fast Fourier Transform (FFT)

Real-Space Approach for the Electronic Calculation of Twisted Bilayer Graphene Using the Orthogonal Polynomial Technique

We discuss technical issues involving the implementation of a computational method for the electronic structure of material systems of arbitrary atomic arrangement. The method is based on the analysis of time evolution of electron states in the real lattice space. The Chebyshev polynomials of the first kind are used to approximate the time evolution operator.  We demonstrate that the developed method is powerful and efficient since the computational scaling law is linear. We invoked the method to study the electronic properties of special twisted bilayer graphene whose atomic structure is quasi-crystalline. We show the density of states of an electron in this graphene system as well as the variation of the associated time auto-correlation function. We find the fluctuation of electron density on the lattice nodes forming a typical pattern closely related to the typical atomic pattern of the quasi-crystalline bilayer graphene configuration

Secrecy performance analysis on spatial modeling of wireless communications with unmanned aerial vehicle and ground devices

In this paper, the secrecy performance of the spatial modeling for ground devices with randomly placed eavesdroppers when an unmanned aerial vehicle (UAV) acted as two hops decode and forward (DF) was investigated. We characterize the secrecy outage probability (SOP) and intercept probability (IP) expressions. Our capacity performance analysis is based on the Rayleigh fading distributions. After analytical results by Monte Carlo simulation, and the Gauss-Chebyshev parameter was selected to yield a close approximation, the results demonstrate the SOP with the average signal-to-noise ratio (SNR) between UAV and ground users among the eavesdroppers and the IP relationship with the ability to intercept the information of the ground users successfully

AN INVESTIGATION INTO DIFFICULTIES IN ENGLISH LISTENING OF FRESHMEN MAJORING IN ENGLISH AT A UNIVERSITY IN THE MEKONG DELTA, VIETNAM

English is a very popular language in the world. However, learning a foreign language is not an easy process for learners, especially the English listening process. In fact, most learners believe that it is hard for them to master this skill. Therefore, the research “An Investigation into Difficulties in English Listening of Freshmen Majoring in English at a University in the Mekong Delta” was conducted with the purpose of helping these students to recognize clearly their own problems in English listening. Statistical data were collected from eighty-five English-majored freshmen. The main instrument of the study was a questionnaire. The findings of the research would point out the students’ difficulties in linguistics, including vocabulary, grammar, pronunciation, intonation and accent; background knowledge; and difficulties from their own minds. One more notable purpose of this research is that thanks to the results, students can now solve their own problems, so that they can study better. Article visualizations

PROBLEMS IN VIETNAMESE-ENGLISH TRANSLATION OF RELATIVE CLAUSES FOR ENGLISH-MAJORED JUNIORS AT TAY DO UNIVERSITY, VIETNAM

Realistically, Vietnamese-English translation is not easy for Vietnamese students to master, and relative clauses are not typical in Vietnamese. Therefore, learners cannot avoid mistakes in their translation practice. Concerned researchers carried out a study to identify common Vietnamese-English translation errors in terms of English relative clauses. The participants were 60 juniors from the Bachelor of English course at Tay Do University. Test papers and interviews were employed as the instruments. The collected data from the two instruments mentioned above were all analyzed carefully afterward. The results of the study showed that the students suffered from a variety of grammar and vocabulary problems hindering them from translating Vietnamese into English correctly. Article visualizations

Optimization of Weld Parameters in Wire and Arc-Based Directed Energy Deposition of High Strength Low Alloy Steels

This paper aims to investigate the fabrication of high strength low alloy (HSLA) steels by wire and arc-based directed energy deposition (WADED). Firstly, the relationship between the process variables (including the travel speed-V, the current-C, and the voltage-U) and the geometrical characteristics of weld beads (including the bead height (BH), bead width (BW), and melting pool length (MPL)) was investigated. Secondly, the optimal process variables were identified using the desirability approach. The results indicate that voltage-U has the highest impact on BW and MPL, meanwhile the travel speed-V is the most impacting factor on BH. The optimal variables for the WADED process of HSAL steels are V = 0.3 m/min, C = 160 A, and U = 19 V. The component fabricated with the optimal variables is fully dense without spatters and defects, confirming the efficiency of the WADED process for HSLA steels

Using Solvent Vapor Annealing for the Enhancement of the Stability and Efficiency of Monolithic Hole-conductor-free Perovskite Solar Cells

In the last few years, perovskite solar cells have attracted enormous interest in the photovoltaic community due to their low cost of materials, tunable band gap, excellent photovoltaic properties and easy process ability at low temperature. In this work, we fabricated hole-conductor-free carbon-based perovskite solar cells with the monolithic structure: glass/FTO/bl-TiO$_{2}$/(mp-TiO$_{2}$/mp-ZrO$_{2}$/mp-carbon) perovskite. The mixed 2D/3D perovskite precursor solution composed of PbI$_{2}$, methylammonium iodide (MAI), and 5-ammoniumvaleric acid iodide (5-AVAI) was drop-casted through triple mesoporous TiO$_{2}$/ZrO$_{2}$/carbon electrode films. We found that the isopropyl alcohol (IPA) solvent vapor annealing strongly influenced on the growth of mixed 2D/3D perovskite on triple mesoscopic layers. It resulted in the better pore filling, better crystalline quality of perovskite layer, thus the improved stability and efficiency of perovskite solar cell was attributed to lower defect concentration and reduced recombination

Residual Cardiovascular Risk Factors in Dyslipidemia

Cardiovascular disease poses a major challenge for the 21st century. Although good control of blood pressure and type 2 diabetes and reducing low-density lipoprotein-cholesterol levels can improve cardiovascular outcomes, a substantial residual risk remains existed after treatment in most patient populations. Recently, many efforts have been directed at finding the important role of low high-density-lipoprotein cholesterol, high triglycerides, especially triglyceride-rich lipoproteins and lipoprotein (a) in the metabolism of atherosclerotic plaque formation Therefore, based on the recent evidence, identification and treatment of these risk factors may play a role in optimizing therapeutic strategy, particularly in high risk subjects along with conventional treatment. In clinical practice, adequate attention should be paid when screening and managing residual cardiovascular risk factors in dyslipidemia in term of individualized approach. The ongoing trials will give more answers to elucidate this important area

Population density, water supply, and the risk of dengue fever in Vietnam: cohort study and spatial analysis.

BACKGROUND: Aedes aegypti, the major vector of dengue viruses, often breeds in water storage containers used by households without tap water supply, and occurs in high numbers even in dense urban areas. We analysed the interaction between human population density and lack of tap water as a cause of dengue fever outbreaks with the aim of identifying geographic areas at highest risk. METHODS AND FINDINGS: We conducted an individual-level cohort study in a population of 75,000 geo-referenced households in Vietnam over the course of two epidemics, on the basis of dengue hospital admissions (n = 3,013). We applied space-time scan statistics and mathematical models to confirm the findings. We identified a surprisingly narrow range of critical human population densities between around 3,000 to 7,000 people/km² prone to dengue outbreaks. In the study area, this population density was typical of villages and some peri-urban areas. Scan statistics showed that areas with a high population density or adequate water supply did not experience severe outbreaks. The risk of dengue was higher in rural than in urban areas, largely explained by lack of piped water supply, and in human population densities more often falling within the critical range. Mathematical modeling suggests that simple assumptions regarding area-level vector/host ratios may explain the occurrence of outbreaks. CONCLUSIONS: Rural areas may contribute at least as much to the dissemination of dengue fever as cities. Improving water supply and vector control in areas with a human population density critical for dengue transmission could increase the efficiency of control efforts. Please see later in the article for the Editors' Summary

Results of magnetotelluric survey for studying geothermal system in the Bang area, Quang Binh province

This paper presents the first results from the application of magnetotelluric method (MT) using the new equipment MTU 2000 (Canada) and analysis software to investigate the structure of geothermal area around the Bang hot water source (Quang Binh province). Results of data analysis by MT 1D and 2D models to a depth of 20 km show low resistivity zone in the southwest of Bang hot water (100°C) and allow for interpreting the structural elements of athehydro- geothermal system. This includes a very low resistivity layer at depth of 2 km suggesting a clay cap (heat resistive shield), a relatively low resistivity zone at depth ≥ 2 km reflecting  fractured rocks containing geothermal fluid and hot steam. A lower resistivity body at depth of 12-14 km located about 1.5 km from the hot water source indicates the existence of a heat source or a hot mass of intrusive magma., commonly thought to be sources of typical hydro- geothermal systems potential for energy exploitation. The obtained results not only provide new information for better understanding geothermal resource in the surveyed area, but also point out the methods and technology needed to improve the effectiveness for assessing potential of geothermal resources elsewhere in Vietnam.ReferencesBản đồ Địa chất và khoáng sản Việt Nam tỷ lệ 1:1.000.000. Cục Địa chất và Khoáng sản Việt Nam xuất bản 2004. Lưu trữ Địa chất. Cumming W., 2009: Geothermal resource conceptual models using surface exploration data. In: proceedings, 34th workshop on geothermal reservoir engineering, Stanford University. Data Processing User guide. Phoenix Geophysic Ltd. 2005, 201p. Di Pippo R., 2012: Geothermal Power plant. Principles, applications, case studies. 3rd edition. Elseverdirect, 579p. Doan Van Tuyen, Tran Anh Vu, Nguyen Thi Kim Thuong, 2014: Geochemical Characteristics of Geothermal Hot Water Sources on the Territory of Vietnam. Proceeding, Thirty-Eighth Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, February 24-26, 2014 SGP-TR-202. Duchkov A.D., Nguyen Trong Yem, Dinh Van Toan, and Trinh Viet Bac, 1992: First estimations of heat flow in northern Vietnam. Soviet Geology and Geophysics, Vol. 33, No. 5, pp 92-96. Flynn T., Quy H. H., 1997: Assessment of the geothermal resources of Socialist Republic of Vietnam. Geothermal resources Council Transactions, vol.21, 341-345. IGA report, 2013: Geothermal Exploration best practices: A Guide to resource data collection, analysis, and presentation for Geothermal projects. He Lijuan, 1999: Analysis of heat flow along a transect across the South China Sea. Geothermal Training Programme, Reports 1999, Number 5, 125-140. Hoang Huu Quy, 1998: Overview of the Geothermal potential of Vietnam. Geothermics, Vol.27, n.1, 109-115. Koenig J. et al., 1981: Evaluation of the potential for Geothermal Energy Resources in the SR of Vietnam. Berkeley, CA. Kulinich G.G., Zabolotnikov A.A, Markov Yu., 1989: Cenozoic evalution of the Earth crust and orogeny in South- Eastern Asia (Tiếng Nga). MTU2000: User guide. Phoenix Geophysic Ltd. 2000, 36p. Munoz Gerard, 2014: Exploring for Geothermal Resources with Electromagnetic Methods. Surv Geophys (2014) 35:101-122, Springer, DOI 10.1007/s10712-013-9236-0. Pellerin et al., Johnston M, Hohmann W., 1996: A numerical evaluation of electromagnetic methods in geothermal exploration. Geophysics 61(1996):121-130. Thomas Mathews, et al., 2008: Study on the sozio-economic framework for the use Geothermal energy in Vietnam. Proceedings of the 8th Asian Geothermal Symposium, Hanoi. Trần Huyên, Trương Minh, Nguyễn Tiến Bào, 1999: Về chế độ địa nhiệt ở các bể trầm tích thềm lục địa Việt Nam. Tạp chí Kinh tế Địa chất và Nguyên liệu khoáng. Cục Địa chất và Khoáng sản Việt Nam. Số 18 tháng 2 năm 1999, tr.16-25. Võ Công Nghiệp (chủ biên), 1998: Danh bạ các nguồn nước khoáng và nước nóng Việt Nam. Cục Địa chất và Khoáng sản Việt Nam. Hà Nội, 300tr. Zhdanov M., 2009: Geophysical Electromagnetic Theory and Methods. Methods in Geochemistry and Geophysics, Volume 43. ISSN: 0076-6895 Elsevier, 831pp. WinGLink User guide. Geosystem 200, 182p. www.geosystem.net.