26 research outputs found
Recent Advances in Catanionic Mixtures
Most surfactant mixtures display synergistic physicochemical properties, which have led to their extensive application in various technologies. Aqueous mixtures of two oppositely charged surfactants, so‐called catanionic surfactant mixtures, exhibit the strongest synergistic effect, which is manifested as high surface activity, enhanced adsorption and a low critical aggregation concentration. In addition, catanionic systems display rich phase behavior and a range of nano and microstructures, including small spherical micelles, rod‐like micelles as well as open and closed bilayers (vesicles). The spontaneous formation of catanionic vesicles is of special interest due to their various applications in nanotechnology and pharmaceutical formulations. In this chapter, the properties of catanionic mixtures of amphiphilic molecules with advantageous properties are discussed. Since numerous papers dealing with catanionic mixtures of monomeric surfactants already exist, the aim of this chapter is to summarize recent progress in mixtures of structurally different surfactants. At the end of the chapter, special emphasis is placed on applications of catanionic mixtures
High Resistance Compensation Method for Surface Potential Measurement
The High Resistance Compensation Method (HRCM) was developed to measure the electrode potentials of high resistance electrodes. It is essentially similar to the classical Poggendorff compensation method, but instead of an ampere-meter, the pH-meter was introduced as an indicator of complete compensation. The method was applied to measurements of the electrode potentials of a single crystal rutile
(TiO2) electrode. Electrode potentials were converted to surface potentials, and the dependency of the surface potential on pH in aqueous medium was determined
Interaction of Polyoxometalates and Nanoparticles with Collector Surfaces—Focus on the Use of Streaming Current Measurements at Flat Surfaces
Streaming current measurements were used to study the interaction of polyoxometalates (POMs) and nanoparticles (NPs) with flat surfaces as an alternative, innovative approach to infer POM and NP properties of potential sparse material in terms of charge and magnitude. With respect to POMs, the approach was able to reveal subtle details of charging properties of +7 vs. +8 charge at very low POM concentrations. For NPs, the sign of charge and even the zeta-potential curve was retrieved. Concerning NPs, mutual interaction between TiO and SiO surfaces was studied in some detail via macroscopic measurements. Post-mortem analysis of samples from electrokinetic studies and separate investigations via AFM and HRTEM verified the interactions between TiO NPs and SiO collector surfaces. The interactions in the SiO/TiO system depend to some extent on NP morphology, but in all our systems, irreversible interactions were observed, which would make the studied types of NPs immobile in natural environments. Overall, we conclude that the measurement of streaming currents at flat surfaces is valuable (i) to study NP and POM collector surface interactions and (ii) to simultaneously collect NPs or POM (or other small mobile clusters) for further (structural, morphological or release) investigations
Charge Properties of TiO2 Nanotubes in NaNO3 Aqueous Solution
Charging of material surfaces in aqueous electrolyte solutions is one of the most important processes in the interactions between biomaterials and surrounding tissue. Other than a biomaterial, titania nanotubes (TiO2 NTs) represent a versatile material for numerous applications such as heavy metal adsorption or photocatalysis. In this article, the surface charge properties of titania NTs in NaNO3 solution were investigated through electrophoretic mobility and polyelectrolyte colloid titration measuring techniques. In addition, we used high-resolution transmission electron microscopy imaging to determine the morphology of TiO2 NTs. A theoretical model based on the classical density functional theory coupled with the charge regulation method in terms of mass action law was developed to understand the experimental data and to provide insights into charge properties at different physical conditions, namely, pH and NaNO3 concentration. Two intrinsic protonation constants and surface site density have been obtained. The electrostatic properties of the system in terms of electrostatic potentials and ion distributions were calculated and discussed for various pH values. The model can quantitatively describe the titration curve as a function of pH for higher bulk salt concentrations and the difference in the equilibrium amount of charges between the inner and outer surfaces of TiO2 NTs. Calculated counterion (NO3–) distributions show a pronounced decrease of NO3– ions for high bulk pH (both inside and outside TiO2 NT) because of the strong electric field. With the decrease of bulk pH or the increase of the salt concentration, NO3– is able to accumulate near the TiO2 NTs surfaces
Interaction of Polyoxometalates and Nanoparticles with Collector Surface — Focus on the Use of Streaming Current Measurements at Flat Surfaces
Streaming current measurements were used to study the interaction of polyoxometalates (POMs) and nanoparticles (NPs) with flat surfaces as an alternative, innovative approach to infer POM and NP properties of potential sparse material in terms of charge and magnitude. With respect to POMs, the approach was able to reveal subtle details of charging properties of +7 vs. +8 charge at very low POM concentrations. For NPs, the sign of charge and even the zeta-potential curve was retrieved. Concerning NPs, mutual interaction between TiO2 and SiO2 surfaces was studied in some detail via macroscopic measurements. Post-mortem analysis of samples from electrokinetic studies and separate investigations via AFM and HRTEM verified the interactions between TiO2 NPs and SiO2 collector surfaces. The interactions in the SiO2/TiO2 system depend to some extent on NP morphology, but in all our systems, irreversible interactions were observed, which would make the studied types of NPs immobile in natural environments. Overall, we conclude that the measurement of streaming currents at flat surfaces is valuable (i) to study NP and POM collector surface interactions and (ii) to simultaneously collect NPs or POM (or other small mobile clusters) for further (structural, morphological or release) investigations
Amorphous Calcium Phosphate Formation and Aggregation Process Revealed by Light Scattering Techniques
Amorphous calcium phosphate (ACP) attracts attention as a precursor of crystalline calcium phosphates (CaPs) formation in vitro and in vivo as well as due to its excellent biological properties. Its formation can be considered to be an aggregation process. Although aggregation of ACP is of interest for both gaining a fundamental understanding of biominerals formation and in the synthesis of novel materials, it has still not been investigated in detail. In this work, the ACP aggregation was followed by two widely applied techniques suitable for following nanoparticles aggregation in general: dynamic light scattering (DLS) and laser diffraction (LD). In addition, the ACP formation was followed by potentiometric measurements and formed precipitates were characterized by Fourier transform infrared spectroscopy (FTIR), powder X- ray diffraction (PXRD), transmission electron microscopy (TEM), and atomic force microscopy (AFM). The results showed that aggregation of ACP particles is a process which from the earliest stages simultaneously takes place at wide length scales, from nanometers to micrometers, leading to a highly polydisperse precipitation system, with polydispersity and vol. % of larger aggregates increasing with concentration. Obtained results provide insight into developing a way of regulating ACP and consequently CaP formation by controlling aggregation on the scale of interest
Calcium oxalate and gallic acid: structural characterization and process optimization toward obtaining high contents of calcium oxalate monohydrate and dihydrate
The search for an efficient drug or inhibitor in the formation process of kidney stones has been a promising research topic towards reducing the risks of the formation of disease. However, several challenges have been faced in investigating the most common constituents of kidney stones, calcium oxalate and its hydrate forms (COM, COD and COT). This study focuses on the preparation and structural characterization (TG, XRD, FTIR, SEM) of calcium oxalate hydrates in the presence of gallic acid (GA) and by varying operating parameters such as temperature (25 °C, 36.5 °C and 48 °C), pH (5.6, 6.5 and 7.5) and amount of added GA (ranging from 100 mg to 1000 mg). Response surface methodology was applied in order to evaluate the effects of operating parameters in the formation of COM and COD, and for the process optimization towards maximizing their content in samples. The results indicated that GA inhibited the formation of COM (0–100%) and promoted the formation of COD (0 ≤ 99%), while a medium pH and the amount of added GA showed a significant effect in the process of COD formation. In order to investigate the interactions established in the formation process and the possible adsorption between GA and the formed crystals, electrochemical measurements were performed
Precipitation of Calcium Phosphates and Calcium Carbonates in the Presence of Differently Charged Liposomes
Liposomes (lipid vesicles) are often considered to be a versatile tool for the synthesis of ad-vanced materials, as they allow various control mechanisms to tune the materials’ properties. Among diverse materials, the synthesis of calcium phosphates (CaPs) and calcium carbonates (CaCO3) using liposomes has attracted particular attention in the development of novel (bio)materials and biomineralization research. However, the preparation of materials using liposomes has not yet been fully exploited. Most of the liposomes used have been anionic and/or zwitterionic, while data on the influence of cationic liposomes are limited. Therefore, the aim of this study was to investigate and compare the influence of differently charged liposomes on CaPs and CaCO3 formation. Zwitterionic 1, 2-dimyristoyl-sn- glycero-3-phosphocholine (DMPC), negatively charged 1, 2-dimyristoyl-sn-glycero-3-phospho-L- serine (DMPS), and positively charged 1, 2- dioleoyl-sn-glycero-3-ethylphosphocholine (EPC) lipids were used to prepare the respective liposomes. The presence of liposomes during the spontaneous precipitation of CaPs and CaCO3 affected both the precipitation and transformation kinetics, as well as the morphol-ogy of the precipitates formed. The most prominent effect was noted for both materials in the presence of DMPS liposomes, as (nano) shell structures were formed in both cases. The obtained results indicate possible strategies to fine-tune the precipitation process of CaPs and CaCO3, which may be of interest for the production of novel materials
Precipitation at room temperature as a fast and versatile method for calcium phosphate/TiO2 nanocomposites synthesis
The constantly growing need for advanced bone regeneration materials has motivated the development of calcium phosphates (CaPs) composites with a different metal or metal-oxide nanomaterials and their economical and environmentally friendly production. Here, two procedures for the synthesis of CaPs composites with TiO2 nanoplates (TiNPl) and nanowires (TiNWs) were tested, with the immersion of TiO2 nanomaterials (TiNMs) in corrected simulated body fluid (c-SBF) and precipitation of CaP in the presence of TiNMs. The materials obtained were analyzed by powder X-ray diffraction, spectroscopic and microscopic techniques, Brunauer–Emmett–Teller surface area analysis, thermogravimetric analysis, dynamic and electrophoretic light scattering, and their hemocompatibility and ability to induce reactive oxygen species were evaluated. After 28 days of immersion in c-SBF, no significant CaP coating was formed on TiNMs. However, the composites with calcium-deficient apatite (CaDHA) were obtained after one hour in the spontaneous precipitation system. In the absence of TiNMs, CaDHA was also formed, indicating that control of the CaP phase formed can be accomplished by fine-tuning conditions in the precipitation system. Although the morphology and size of crystalline domains of CaDHA obtained on the different nanomaterials differed, no significant difference was detected in their local structure. Composites showed low reactive oxygen species (ROS) production and did not induce hemolysis. The results obtained indicate that precipitation is a suitable and fast method for the preparation of CaPs/TiNMs nanocomposites which shows great potential for biomedical applications
Surface Potential of Polycrystalline Hematite in Aqueous Medium
The surface potential of polycrystalline hematite in aqueous sodium perchlorate environment as a function of pH was examined. Surface potential of hematite was obtained from measured electrode potential of a nonporous polycrystalline hematite electrode. Acidic solution was titrated with base, and the backward titration with acid was performed. Substantial hysteresis was obtained which enabled location of the point of zero potential and equilibrium values of surface potentials. The theoretical interpretation of the equilibrium data was performed by applying the surface complexation model and the thermodynamic equilibrium constants for the first and the second step of surface protonation was obtained as logK1∘=11.3;logK2∘=2.8