912 research outputs found
Recommended from our members
Life prediction methodology for ceramic components of advanced vehicular heat engines: Volume 3, Appendices 3, 4, 5, 6, and 7. Final report
The appendices contain: dynamic fatigue testing of MOR specimens in air at Allison from 1000 to 1400 C; dynamic fatigue testing of MOR specimens in air and Ar at ORNL from 1000-1400 C; dynamic fatigue testing of button-head tensile specimens in air at Southern Research Institute; tensile creep curves for dogbone specimens tested at the National Institute of Science and Technology; and oxidation behavior of PY-6 Si nitride between 1000-1400 C in air
Recommended from our members
Life prediction methodology for ceramic components of advanced vehicular heat engines: Volume 1. Final report
One of the major challenges involved in the use of ceramic materials is ensuring adequate strength and durability. This activity has developed methodology which can be used during the design phase to predict the structural behavior of ceramic components. The effort involved the characterization of injection molded and hot isostatic pressed (HIPed) PY-6 silicon nitride, the development of nondestructive evaluation (NDE) technology, and the development of analytical life prediction methodology. Four failure modes are addressed: fast fracture, slow crack growth, creep, and oxidation. The techniques deal with failures initiating at the surface as well as internal to the component. The life prediction methodology for fast fracture and slow crack growth have been verified using a variety of confirmatory tests. The verification tests were conducted at room and elevated temperatures up to a maximum of 1371 {degrees}C. The tests involved (1) flat circular disks subjected to bending stresses and (2) high speed rotating spin disks. Reasonable correlation was achieved for a variety of test conditions and failure mechanisms. The predictions associated with surface failures proved to be optimistic, requiring re-evaluation of the components` initial fast fracture strengths. Correlation was achieved for the spin disks which failed in fast fracture from internal flaws. Time dependent elevated temperature slow crack growth spin disk failures were also successfully predicted
Can forest management based on natural disturbances maintain ecological resilience?
Given the increasingly global stresses on forests, many ecologists argue that managers must maintain ecological resilience: the capacity of ecosystems to absorb disturbances without undergoing fundamental change. In this review we ask: Can the emerging paradigm of natural-disturbance-based management (NDBM) maintain ecological resilience in managed forests? Applying resilience theory requires careful articulation of the ecosystem state under consideration, the disturbances and stresses that affect the persistence of possible alternative states, and the spatial and temporal scales of management relevance. Implementing NDBM while maintaining resilience means recognizing that (i) biodiversity is important for long-term ecosystem persistence, (ii) natural disturbances play a critical role as a generator of structural and compositional heterogeneity at multiple scales, and (iii) traditional management tends to produce forests more homogeneous than those disturbed naturally and increases the likelihood of unexpected catastrophic change by constraining variation of key environmental processes. NDBM may maintain resilience if silvicultural strategies retain the structures and processes that perpetuate desired states while reducing those that enhance resilience of undesirable states. Such strategies require an understanding of harvesting impacts on slow ecosystem processes, such as seed-bank or nutrient dynamics, which in the long term can lead to ecological surprises by altering the forest's capacity to reorganize after disturbance
Stochastic Phase Space Localization for a Single Particle
We propose a feedback scheme to control the vibrational motion of a single
trapped particle based on indirect measurements of its position. It results the
possibility of a motional phase space uncertainty contraction, correponding to
cool the particle close to the motional ground state.Comment: 9 pages, 1 figure. Concluding section and figure revised. In press on
Phys. rev.
Search for the Electric Dipole Moment of the tau Lepton
We have searched for a CP violation signature arising from an electric dipole
moment (d_tau) of the tau lepton in the e+e- -> tau+tau- reaction. Using an
optimal observable method and 29.5 fb^{-1} of data collected with the Belle
detector at the KEKB collider at sqrt{s} = 10.58 GeV, we find Re(d_tau) = (1.15
+- 1.70) x 10^{-17} ecm and Im(d_tau) = (-0.83 +- 0.86) x 10^{-17} ecm and set
the 95% confidence level limits -2.2 < Re(d_tau) < 4.5 (10^{-17}ecm) and -2.5 <
Im(d_tau) < 0.8 (10^{-17}ecm).Comment: 15 pages, LaTeX, 21 figures, submitted to Phys. Lett.
Study of Decays
We report on a study of decays using
29.1 fb of annihilation data recorded at the
resonance with the Belle detector at the KEKB storage ring. Making no
assumptions about the intermediate mechanism, the branching fractions for
and are
determined to be and respectively. An analysis of candidates yields to the first observation of the color-suppressed
hadronic decay with the branching fraction . We measure the ratio of branching fractions
= 1.6 0.8.Comment: 13 pages, LaTex, 4 figures, submitted to Phys. Lett.
Observation of Cabibbo-suppressed and W-exchange Lambda_c^+ baryon decays
We present measurements of the Cabibbo-suppressed decays Lambda_c^+ -->
Lambda0 K+ and Lambda_c^+ --> Sigma0 K+ (both first observations), Lambda_c^+
--> Sigma+ K+ pi- (seen with large statistics for the first time), Lambda_c^+
--> p K+ K- and Lambda_c^+ --> p phi (measured with improved accuracy).
Improved branching ratio measurements for the decays Lambda_c^+ --> Sigma+ K+
K- and Lambda_c^+ --> Sigma+ phi, which are attributed to W-exchange diagrams,
are shown. We also present the first evidence for Lambda_c^+ --> Xi(1690)^0 K+
and set an upper limit on the non-resonant decay Lambda_c^+ --> Sigma+ K+ K-.
This analysis was performed using 32.6 fb^{-1} of data collected by the Belle
detector at the asymmetric e+ e- collider KEKB.Comment: Submitted to Phys. Lett. B. v2: A small correction to the Authorlist
was made. An earlier version of this analysis was released as
BELLE-CONF-0130, hep-ex/010800
Measurements of Branching Fractions and Decay Amplitudes in B-> J/\psi K^* decays
The branching fractions and the decay amplitudes of B -> J/psi K^* decays are
measured in a 29.4/fb data sample collected with the Belle detector at the KEKB
electron-positron collider. The decay amplitudes of helicity states of the
J/psi K^* system are determined from the full angular distribution of the final
state particles in the transversity basis. The branching fractions are measured
to be (1.29\pm0.05\pm0.13) \times 10^{-3} for neutral mesons and
(1.28\pm0.07\pm0.14) \times 10^{-3} for charged mesons. The measured
longitudinal and transverse (perpendicular to the transversity plane)
amplitudes are |A_0|^2 = 0.62\pm0.02\pm0.03 and |A_{\perp}|^2 =
0.19\pm0.02\pm0.03, respectively. The value of |A_{\perp}|^2 shows that the CP
even component dominates in the B^0 \to J/\psi K^{*0}(K_S\pi^0) decay.Comment: 17 pages, 3 figures, 5 tables, to appear in Phys. Lett.
- …