1,744 research outputs found
Insulation for cryogenic tanks has reduced thickness and weight
Dual seal insulation, consisting of an inner layer of sealed-cell Mylar honeycomb core and an outer helium purge channel of fiber glass reinforced phenolic honeycomb core, is used as a thin, lightweight insulation for external surfaces of cryogenic-propellant tanks
v-K-data for silica from interrupted lifetime measurements
Different methods were applied so far in order to determine subcritical crack growth for silica. Mostly, fracture mechanics standard tests with macro cracks were used for this purpose. In this report, we evaluated the subcritical crack growth curves from interrupted lifetime tests on silica bending specimens containing small natural flaws. The resulting v-K-curve showed crack growth rates down to 10 m/s indicating a threshold for subcritical crack growth at
K0.31 MPa
In the plot of v=f(K/K) slight material differences could be eliminated and suitable agreement with macro-crack results by Wiederhorn and Bolz [1] on DCB-specimens and Michalske et al. [2] on DCDC-specimens could be stated
Mechanical investigation of glass ceramic brazed ceramic and steel composites
Solid oxide fuel cells (SOFC) convert chemical energy from hydrogen, methane, or other hydrocarbons directly into electrical energy and heat. Advantages are low noise during operation as well as relatively low pollutant emissions. This makes them interesting for stationary applications, eg combined heat and power plants for domestic use and for mobile applications, when there is a demand for integrating auxiliary power units. The high operating temperatures of about 850°C and the simultaneous presence by both, reducing and oxidizing atmospheres place high demands on the components of a SOFC. Due to these requirements, glassâceramics are proposed as sealants between interconnector and electrolyte. They provide lower costs and lower weight than commercially used silver solders. Furthermore, they have the following impressive benefits: The sealants are electrical insulating, chemical stable and by careful materials selection and adapted manufacturing processes, they adhere well on steel and on ceramic substrates. In order to characterize the adhesion of glassâceramic sealants on steel and on zirconia substrates, layerâlike composites are fabricated by screenâprinting and subsequent sintering in air. It turns out that the formation of crystalline phases at the interface is crucial for the adhesion behavior
High power, high repetition rate laser-based sources for attosecond science
Within the last two decades attosecond science has been established as a novel research field providing insights into the ultrafast electron dynamics that follows a photoexcitation or photoionization process. Enabled by technological advances in ultrafast laser amplifiers, attosecond science has been in turn, a powerful engine driving the development of novel sources of intense ultrafast laser pulses. This article focuses on the development of high repetition rate laser-based sources delivering high energy pulses with a duration of only a few optical cycles, for applications in attosecond science. In particular, a high power, high repetition rate optical parametric chirped pulse amplification system is described, which was developed to drive an attosecond pump-probe beamline targeting photoionization experiments with electron-ion coincidence detection at high acquisition rates
Diffusion in normal and critical transient chaos
In this paper we investigate deterministic diffusion in systems which are
spatially extended in certain directions but are restricted in size and open in
other directions, consequently particles can escape. We introduce besides the
diffusion coefficient D on the chaotic repeller a coefficient which
measures the broadening of the distribution of trajectories during the
transient chaotic motion. Both coefficients are explicitly computed for
one-dimensional models, and they are found to be different in most cases. We
show furthermore that a jump develops in both of the coefficients for most of
the initial distributions when we approach the critical borderline where the
escape rate equals the Liapunov exponent of a periodic orbit.Comment: 4 pages Revtex file in twocolumn format with 2 included postscript
figure
Recommended from our members
Guidelines - A Primer for Communicating Effectively with NABIR Stakeholders
This version of the communication primer comprises two interlocking parts: Pat 1, a practical section, intended to prepare you for public interactions, and Part 2, a theoretical section that provides social and technical bases for the practices recommended in Part 1. The mutual support of practice and theory is very familiar in science and clearly requires a willingness to observe and revise our prior assumptions--in this document, we invoke both. We hope that is offering will represent a step both towards improving practice and maturing the theory of practical science communication
Gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy
Fundacao para a Ciencia e Tecnologia (FCT)- project UID/EMS/00667/2019 (UNIDEMI).
FMBF acknowledges funding of CENIMAT by FEDER through the program COMPETE 2020 and National Funds through FCT-Portuguese Foundation for Science and Technology, under the project UID/CTM/50025/2019 and FCT/MCTES.
This work was supported by the Future Material Discovery Project of the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT of Korea (NRF-2016M3D1A1023383).
NFFA-Europe Transnational Access Activity (project reference Nf-20010136 EC and ID-806).High entropy alloys have emerged as novel engineering alloys with remarkable mechanical properties in a wide range of temperatures. Among the several high entropy alloys that were already described, the equiatomic CrMnFeCoNi alloy is the most studied one. In this work, gas tungsten arc welding of as-rolled CrMnFeCoNi high entropy alloy sheets was performed. The microstructural characterization encompassed the use of electron microscopy, including electron backscattered diffraction, synchrotron X-ray diffraction analysis, microhardness testing and mechanical evaluation. A comprehensive description of the microstructural evolution, including texture and microstrain determination, of the joint is presented and discussed. Upon mechanical testing, the joints systematically failed in the fusion zone due. The large grain size and low hardness of this region justifies the failure location. The joints' mechanical behaviour is correlated with the material microstructure.publishersversionpublishe
Recommended from our members
Slow and fast single photons from a quantum dot interacting with the excited state hyperfine structure of the Cesium D1-line
Hybrid interfaces between distinct quantum systems play a major role in the implementation of quantum networks. Quantum states have to be stored in memories to synchronize the photon arrival times for entanglement swapping by projective measurements in quantum repeaters or for entanglement purification. Here, we analyze the distortion of a single-photon wave packet propagating through a dispersive and absorptive medium with high spectral resolution. Single photons are generated from a single In(Ga)As quantum dot with its excitonic transition precisely set relative to the Cesium D1 transition. The delay of spectral components of the single-photon wave packet with almost Fourier-limited width is investigated in detail with a 200 MHz narrow-band monolithic Fabry-PĂ©rot resonator. Reflecting the excited state hyperfine structure of Cesium, âslow lightâ and âfast lightâ behavior is observed. As a step towards room-temperature alkali vapor memories, quantum dot photons are delayed for 5 ns by strong dispersion between the two 1.17 GHz hyperfine-split excited state transitions. Based on optical pumping on the hyperfine-split ground states, we propose a simple, all-optically controllable delay for synchronization of heralded narrow-band photons in a quantum network
- âŠ