Residual Stress, Mechanical Behavior and Electrical Properties of Cu/Nb Thin-Film Multilayers

Effect of compositional wavelength (modulation) on residual stress, electrical resistivities and mechanical properties of Cu/Nb thin-film multilayers sputtered onto single-crystal Si substrates, was evaluated. Electrical resistivities were measured down to 4 K using a standard 4-point probe. Differential specimen curvature was used to determine residual stress, and a microprobe was used to obtain hardness and elastic modulus. Profilometry, ion-beam analysis and TEM were used. Hardness of the Cu-Nb multilayers increased with decreasing compositional wavelength so that the layered structures had hardness values in excess of either constituent and the hardness predicted by the rule of mixtures. A peak in net residual compressive stress of the multilayers was observed at a compositional wavelength of 100 nm. No resistivity plateau was observed within the composition wavelength range studied

Validity of a Protocol for Adult Self-Report of Dyslexia and Related Difficulties

Background: There is an increased prevalence of reading and related difficulties in children of dyslexic parents. In order to understand the causes of these difficulties, it is important to quantify the risk factors passed from parents to their offspring. Method: 417 adults completed a protocol comprising a 15-item questionnaire rating reading and related skills and a scale assessing ADHD symptoms; 344 completed reading, nonword reading and spelling tests. Results: A confirmatory factor analysis with four factors (Reading, Word Finding, Attention and Hyperactivity) provided a reasonable fit to the data. The Reading Factor showed robust correlations with measured literacy skills. Adults who reported as dyslexic, or rated their reading difficulties as more severe, gained lower scores on objective measures of literacy skills. Although the sensitivity of the new scale was acceptable, it tended to miss some cases of low literacy. Conclusions: Self-report scales of reading and of attention difficulties are useful for identifying adults with reading and attention difficulties which may confer risks on their children of related problems. It is important for research following children at family risk of dyslexia to be aware of these effects

Modelling Future Coronary Heart Disease Mortality to 2030 in the British Isles.

OBJECTIVE: Despite rapid declines over the last two decades, coronary heart disease (CHD) mortality rates in the British Isles are still amongst the highest in Europe. This study uses a modelling approach to compare the potential impact of future risk factor scenarios relating to smoking and physical activity levels, dietary salt and saturated fat intakes on future CHD mortality in three countries: Northern Ireland (NI), Republic of Ireland (RoI) and Scotland. METHODS: CHD mortality models previously developed and validated in each country were extended to predict potential reductions in CHD mortality from 2010 (baseline year) to 2030. Risk factor trends data from recent surveys at baseline were used to model alternative future risk factor scenarios: Absolute decreases in (i) smoking prevalence and (ii) physical inactivity rates of up to 15% by 2030; relative decreases in (iii) dietary salt intake of up to 30% by 2030 and (iv) dietary saturated fat of up to 6% by 2030. Probabilistic sensitivity analyses were then conducted. RESULTS: Projected populations in 2030 were 1.3, 3.4 and 3.9 million in NI, RoI and Scotland respectively (adults aged 25-84). In 2030: assuming recent declining mortality trends continue: 15% absolute reductions in smoking could decrease CHD deaths by 5.8-7.2%. 15% absolute reductions in physical inactivity levels could decrease CHD deaths by 3.1-3.6%. Relative reductions in salt intake of 30% could decrease CHD deaths by 5.2-5.6% and a 6% reduction in saturated fat intake might decrease CHD deaths by some 7.8-9.0%. These projections remained stable under a wide range of sensitivity analyses. CONCLUSIONS: Feasible reductions in four cardiovascular risk factors (already achieved elsewhere) could substantially reduce future coronary deaths. More aggressive polices are therefore needed in the British Isles to control tobacco, promote healthy food and increase physical activity

Development of a Thin-Film Solar Cell Interconnect for the Powersphere Concept

Dual junction amorphous silicon (a-Si) solar cells produced on polyimide substrate have been selected as the best candidate to produce a lightweight solar array for the PowerSphere program. The PowerSphere concept features a space-inflatable, geodetic solar array approximately 0.6 meters in diameter and capable of generating about 20W of electrical power. Trade studies of various wiring concepts and connection methods led to an interconnect design with a copper contact that wraps around the edge, to the back of the solar cell. Applying Plasma Vapor Deposited (PVD) copper film to both sides and the edge of the solar cell produces the wrap around contact. This procedure results in a contact pad on the back of the solar cell, which is then laser welded to a flex circuit material. The flex circuit is constructed of copper in a custom designed routing pattern, and then sandwiched in a Kapton insulation layer. The flex circuit then serves as the primary power distribution system between the solar cells and the spacecraft. Flex circuit material is the best candidate for the wiring harness because it allows for low force deployment of the solar cells by the inflatable hinges on the PowerSphere. An additional frame structure, fabricated and assembled by ILC Dover, will reinforce the wrap around contact-flex blanket connection, thus providing a mechanically robust solar cell interconnect for the PowerSphere multifunctional program. The PowerSphere team will use the wraparound contact design approach as the primary solution for solar cell integration and the flex blanket for power distribution

Associated reading skills in children with a history of Specific Language Impairment (SLI)

A large cohort of 200 eleven-year-old children with Specific Language Impairment (SLI) were assessed on basic reading accuracy and on reading comprehension as well as language tasks. Reading skills were examined descriptively and in relation to early language and literacy factors. Using stepwise regression analyses in which age and nonverbal IQ were controlled for, it was found that a single word reading measure taken at 7 years was unsurprisingly a strong predictor of the two different types of reading ability. However, even with this measure included, a receptive syntax task (TROG) entered when reading accuracy score was the DV. Furthermore, a test of expressive syntax/narrative and a receptive syntax task completed at 7 years entered into the model for word reading accuracy. When early reading accuracy was excluded from the analyses, early phonological skills also entered as a predictor of both reading accuracy and comprehension at 11 years. The group of children with a history of SLI were then divided into those with no literacy difficulties at 11 and those with some persisting literacy impairment. Using stepwise logistic regression, and again controlling for IQ and age, 7 years receptive syntax score (but not tests of phonology, expressive vocabulary or expressive syntax/narrative) entered as a positive predictor of membership of the ‘no literacy problems’ group regardless of whether early reading accuracy was controlled for in step one. The findings are discussed in relation to the overlap of SLI and dyslexia and the long term sequelae of language impairment

Antimicrobial resistance determinants are associated with Staphylococcus aureus bacteraemia and adaptation to the healthcare environment: a bacterial genome-wide association study

Staphylococcus aureus is a major bacterial pathogen in humans, and a dominant cause of severe bloodstream infections. Globally, antimicrobial resistance (AMR) in S. aureus remains challenging. While human risk factors for infection have been defined, contradictory evidence exists for the role of bacterial genomic variation in S. aureus disease. To investigate the contribution of bacterial lineage and genomic variation to the development of bloodstream infection, we undertook a genome-wide association study comparing bacteria from 1017 individuals with bacteraemia to 984 adults with asymptomatic S. aureus nasal carriage. Within 984 carriage isolates, we also compared healthcare-associated (HA) carriage with community-associated (CA) carriage. All major global lineages were represented in both bacteraemia and carriage, with no evidence for different infection rates. However, kmers tagging trimethoprim resistance-conferring mutation F99Y in dfrB were significantly associated with bacteraemia-vs-carriage (P=10-8.9-10-9.3). Pooling variation within genes, bacteraemia-vs-carriage was associated with the presence of mecA (HMP=10-5.3) as well as the presence of SCCmec (HMP=10-4.4). Among S. aureus carriers, no lineages were associated with HA-vs-CA carriage. However, we found a novel signal of HA-vs-CA carriage in the foldase protein prsA, where kmers representing conserved sequence allele were associated with CA carriage (P=10-7.1-10-19.4), while in gyrA, a ciprofloxacin resistance-conferring mutation, L84S, was associated with HA carriage (P=10-7.2). In an extensive study of S. aureus bacteraemia and nasal carriage in the UK, we found strong evidence that all S. aureus lineages are equally capable of causing bloodstream infection, and of being carried in the healthcare environment. Genomic variation in the foldase protein prsA is a novel genomic marker of healthcare origin in S. aureus but was not associated with bacteraemia. AMR determinants were associated with both bacteraemia and healthcare-associated carriage, suggesting that AMR increases the propensity not only to survive in healthcare environments, but also to cause invasive disease

Multiple Cytokines Are Released When Blood from Patients with Tuberculosis Is Stimulated with Mycobacterium tuberculosis Antigens

Mycobacterium tuberculosis (Mtb) infection may cause overt disease or remain latent. Interferon gamma release assays (IGRAs) detect Mtb infection, both latent infection and infection manifesting as overt disease, by measuring whole-blood interferon gamma (IFN-γ) responses to Mtb antigens such as early secreted antigenic target-6 (ESAT-6), culture filtrate protein 10 (CFP-10), and TB7.7. Due to a lack of adequate diagnostic standards for confirming latent Mtb infection, IGRA sensitivity for detecting Mtb infection has been estimated using patients with culture-confirmed tuberculosis (CCTB) for whom recovery of Mtb confirms the infection. In this study, cytokines in addition to IFN-γ were assessed for potential to provide robust measures of Mtb infection.Cytokine responses to ESAT-6, CFP-10, TB7.7, or combinations of these Mtb antigens, for patients with CCTB were compared with responses for subjects at low risk for Mtb infection (controls). Three different multiplexed immunoassays were used to measure concentrations of 9 to 20 different cytokines. Responses were calculated by subtracting background cytokine concentrations from cytokine concentrations in plasma from blood stimulated with Mtb antigens.Two assays demonstrated that ESAT-6, CFP-10, ESAT-6+CFP-10, and ESAT-6+CFP-10+TB7.7 stimulated the release of significantly greater amounts of IFN-γ, IL-2, IL-8, MCP-1 and MIP-1β for CCTB patients than for controls. Responses to combination antigens were, or tended to be, greater than responses to individual antigens. A third assay, using whole blood stimulation with ESAT-6+CFP-10+TB7.7, revealed significantly greater IFN-γ, IL-2, IL-6, IL-8, IP-10, MCP-1, MIP-1β, and TNF-α responses among patients compared with controls. One CCTB patient with a falsely negative IFN-γ response had elevated responses with other cytokines.Multiple cytokines are released when whole blood from patients with CCTB is stimulated with Mtb antigens. Measurement of multiple cytokine responses may improve diagnostic sensitivity for Mtb infection compared with assessment of IFN-γ alone

Thermal Cycle Testing of the Powersphere Engineering Development Unit

During the past three years the team of The Aerospace Corporation, Lockheed Martin Space Systems, NASA Glenn Research Center, and ILC Dover LP have been developing a multifunctional inflatable structure for the PowerSphere concept under contract with NASA (NAS3-01115). The PowerSphere attitude insensitive solar power-generating microsatellite, which could be used for many different space and Earth science purposes, is ready for further refinement and flight demonstration. The development of micro- and nanosatellites requires the energy collection system, namely the solar array, to be of lightweight and small size. The limited surface area of these satellites precludes the possibility of body mounting the solar array system for required power generation. The use of large traditional solar arrays requires the support of large satellite volumes and weight and also requires a pointing apparatus. The current PowerSphere concept (geodetic sphere), which was envisioned in the late 1990 s by Mr. Simburger of The Aerospace Corporation, has been systematically developed in the past several years.1-7 The PowerSphere system is a low mass and low volume system suited for micro and nanosatellites. It is a lightweight solar array that is spherical in shape and does not require a pointing apparatus. The recently completed project culminated during the third year with the manufacturing of the PowerSphere Engineering Development Unit (EDU). One hemisphere of the EDU system was tested for packing and deployment and was subsequently rigidized. The other hemisphere was packed and stored for future testing in an uncured state. Both cured and uncured hemisphere components were delivered to NASA Glenn Research Center for thermal cycle testing and long-term storage respectively. This paper will discuss the design, thermal cycle testing of the PowerSphere EDU

Carbon stable isotope analysis of cereal remains as a way to reconstruct water availability: preliminary results

Reconstructing past water availability, both as rainfall and irrigation, is important to answer questions about the way society reacts to climate and its changes and the role of irrigation in the development of social complexity. Carbon stable isotope analysis of archaeobotanical remains is a potentially valuable method for reconstructing water availability. To further define the relationship between water availability and plant carbon isotope composition and to set up baseline values for the Southern Levant, grains of experimentally grown barley and sorghum were studied. The cereal crops were grown at three stations under five different irrigation regimes in Jordan. Results indicate that a positive but weak relationship exists between irrigation regime and total water input of barley grains, but no relationship was found for sorghum. The relationship for barley is site-specific and inter-annual variation was present at Deir ‘Alla, but not at Ramtha and Khirbet as-Samra

Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE