An experimental and computational analysis of buoyancy driven flows by laser sheet tomography, particle image velocimetry and computational fluid dynamics

This paper contains details of a three pronged investigation into the development of a buoyant jet impinging on a wall in a closed vessel. The development of the flow was measured experimentally by particle image velocimetry (PIV) and laser sheet tomography. The experimental results are compared with a computational model of the flow calculated by the computational fluid dynamics (CFD) package PHOENICS

Band Alignments, Electronic Structure, and Core-Level Spectra of Bulk Molybdenum Dichalcogenides (MoS<inf>2</inf>, MoSe<inf>2</inf>, and MoTe<inf>2</inf>)

A comprehensive study of bulk molybdenum dichalcogenides is presented with the use of soft and hard X-ray photoelectron (SXPS and HAXPES) spectroscopy combined with hybrid density functional theory (DFT). The main core levels of MoS2, MoSe2, and MoTe2 are explored. Laboratory-based X-ray photoelectron spectroscopy (XPS) is used to determine the ionization potential (IP) values of the MoX2 series as 5.86, 5.40, and 5.00 eV for MoSe2, MoSe2, and MoTe2, respectively, enabling the band alignment of the series to be established. Finally, the valence band measurements are compared with the calculated density of states which shows the role of p-d hybridization in these materials. Down the group, an increase in the p-d hybridization from the sulfide to the telluride is observed, explained by the configuration energy of the chalcogen p orbitals becoming closer to that of the valence Mo 4d orbitals. This pushes the valence band maximum closer to the vacuum level, explaining the decreasing IP down the series. High-resolution SXPS and HAXPES core-level spectra address the shortcomings of the XPS analysis in the literature. Furthermore, the experimentally determined band alignment can be used to inform future device work

Self-Compensation in Transparent Conducting F-Doped SnO2

The factors limiting the conductivity of fluorine-doped tin dioxide (FTO) produced via atmospheric pressure chemical vapor deposition are investigated. Modeling of the transport properties indicates that the measured Hall effect mobilities are far below the theoretical ionized impurity scattering limit. Significant compensation of donors by acceptors is present with a compensation ratio of 0.5, indicating that for every two donors there is approximately one acceptor. Hybrid density functional theory calculations of defect and impurity formation energies indicate the most probable acceptor-type defects. The fluorine interstitial defect has the lowest formation energy in the degenerate regime of FTO. Fluorine interstitials act as singly charged acceptors at the high Fermi levels corresponding to degenerately n-type films. X-ray photoemission spectroscopy of the fluorine impurities is consistent with the presence of substitutional F O donors and interstitial F i in a roughly 2:1 ratio in agreement with the compensation ratio indicated by the transport modeling. Quantitative analysis through Hall effect, X-ray photoemission spectroscopy, and calibrated secondary ion mass spectrometry further supports the presence of compensating fluorine-related defects

Females do not have more injury road accidents on Friday the 13th

BACKGROUND: This study reinvestigated the recent finding that females – but not males – die in traffic accidents on Friday the 13th more often than on other Fridays (Näyhä S: Traffic deaths and superstition on Friday the 13th. Am J Psychiatry 2002, 159: 2110–2111). The current study used matched setting and injury accident data base that is more numerous than fatality data. If such an effect would be caused by impaired psychic and psychomotor functioning due to more frequent anxiety among women, it should also appear in injury crashes. METHODS: We used the national Finnish road accident database for 1989–2002. To control seasonal variation, 21 Fridays the 13th were compared in a matched design to previous and following Fridays, excluding all holidays, on number of accidents, male/female responsibility for accidents, and the number of dead, injured and overall number of active participants (drivers, pedestrians and bicyclists) as a consequence of the accident. RESULTS: There were no significant differences in any examined aspect of road injury accidents among the three Fridays, either in females or males. Women were not overrepresented in crashes that occurred on Fridays 13th. CONCLUSION: There is no consistent evidence for females having more road traffic crashes on Fridays the 13th, based on deaths or road accident statistics. However, this does not imply a non-existent effect of superstition related anxiety on accident risk as no exposure-to-risk data are available. People who are anxious of "Black Friday" may stay home, or at least avoid driving a car

Core Levels, Band Alignments, and Valence-Band States in CuSbS2 for Solar Cell Applications

The earth-abundant material CuSbS2 (CAS) has shown good optical properties as a photovoltaic solar absorber material, but has seen relatively poor solar cell performance. To investigate the reason for this anomaly, the core levels of the constituent elements, surface contaminants, ionization potential, and valence-band spectra are studied by X-ray photoemission spectroscopy. The ionization potential and electron affinity for this material (4.98 and 3.43 eV) are lower than those for other common absorbers, including CuInxGa(1–x)Se2 (CIGS). Experimentally corroborated density functional theory (DFT) calculations show that the valence band maximum is raised by the lone pair electrons from the antimony cations contributing additional states when compared with indium or gallium cations in CIGS. The resulting conduction band misalignment with CdS is a reason for the poor performance of cells incorporating a CAS/CdS heterojunction, supporting the idea that using a cell design analogous to CIGS is unhelpful. These findings underline the critical importance of considering the electronic structure when selecting cell architectures that optimize open-circuit voltages and cell efficiencies

Prevalence, types and demographic features of child labour among school children in Nigeria

BACKGROUND: To determine the prevalence, types and demographic features of child labour among school children in Nigeria. METHODS: A cross-sectional interview study of 1675 randomly selected public primary and secondary school pupils aged 5 to less than 18 years was conducted in the Sagamu Local Government Area of Ogun State, Nigeria from October 1998 to September 1999. RESULTS: The overall prevalence of child labour was 64.5%: 68.6% among primary and 50.3% among secondary school pupils. Major economic activities included street trading (43.6%), selling in kiosks and shops (25.4%) and farming (23.6%). No child was involved in bonded labour or prostitution. Girls were more often involved in labour activities than boys (66.8% versus 62.1%, p = 0.048): this difference was most obvious with street trading (p = 0.0004). Most of the children (82.2%) involved in labour activities did so on the instruction of one or both parents in order to contribute to family income. Children of parents with low socio-economic status or of poorly educated parents were significantly involved in labour activities (p = 0.01 and p = 0.001 respectively). Child labour was also significantly associated with increasing number of children in the family size (p = 0.002). A higher prevalence rate of child labour was observed among children living with parents and relations than among those living with unrelated guardians. CONCLUSION: It is concluded that smaller family size, parental education and family economic enhancement would reduce the pressure on parents to engage their children in labour activities

A hard x-ray photoemission study of transparent conducting fluorine-doped tin dioxide

Fluorine-doped tin oxide (FTO) is a commercially successful transparent conducting oxide with very good electrical (resistivities < 1×103 Ω·cm) and optical properties (transmittance > 85%). These properties coupled with cheap and large-scale deposition on float-glass lines means FTO has found commercial use in, for example, low emissivity windows and solar cells. However, despite its widespread application, a detailed understanding is lacking of the doping and defects in FTO. Recent work [1] has suggested that the fluorine interstitial plays a major role in limiting the conductivity of FTO. Here we present synchrotron radiation high energy x-ray photoemission spectroscopy (XPS) of the fluorine 1s core level of FTO films without in situ surface preparation. This probes deeper than standard XPS and shows that the fluorine interstitial is present not just at the surface of the films and is not an artefact of argon ion sputtering for surface preparation

Optimisation of the conditions for stripping voltammetric analysis at liquid-liquid interfaces supported at micropore arrays: a computational simulation

Micropore membranes have been used to form arrays of micro interfaces between immiscible electroly tesolutions (μITIES) as a basis for the sensing of non-redoxactiveions. Implementation of stripping voltammetry as asensing method at these arrays of μITIES was applied recently to detect drugs and biomolecules at low concentrations. The present study uses computational simulation to investigate the optimum conditions for stripping voltammetricsensing at the μITIES array. In this scenario, thediffusion of ions in both the aqueous and the organic phasescontributes to the sensing response. The influence of the preconcentration time, the micropore aspect ratio, the location of the micro interface within the pore, the ratio of the diffusion coefficients of the analyte ion in the organic and aqueous phases, and the pore wall angle were investigated. The simulations reveal that the accessibility of the microinterfaces during the preconcentration period should not be hampered by a recessed interface and that diffusional transport in the phase where the analyte ions are preconcentrated should be minimized. This will ensure that the ions are accumulated within the micropores close to the interface and thus be readily available for back transferduring the stripping process. On the basis of the results, an optimal combination of the examined parameters is proposed,which together improve the stripping voltammetric signal and provide an improvement in the detection limit

Genetically Engineered Alginate Lyase-PEG Conjugates Exhibit Enhanced Catalytic Function and Reduced Immunoreactivity

Alginate lyase enzymes represent prospective biotherapeutic agents for treating bacterial infections, particularly in the cystic fibrosis airway. To effectively deimmunize one therapeutic candidate while maintaining high level catalytic proficiency, a combined genetic engineering-PEGylation strategy was implemented. Rationally designed, site-specific PEGylation variants were constructed by orthogonal maleimide-thiol coupling chemistry. In contrast to random PEGylation of the enzyme by NHS-ester mediated chemistry, controlled mono-PEGylation of A1-III alginate lyase produced a conjugate that maintained wild type levels of activity towards a model substrate. Significantly, the PEGylated variant exhibited enhanced solution phase kinetics with bacterial alginate, the ultimate therapeutic target. The immunoreactivity of the PEGylated enzyme was compared to a wild type control using in vitro binding studies with both enzyme-specific antibodies, from immunized New Zealand white rabbits, and a single chain antibody library, derived from a human volunteer. In both cases, the PEGylated enzyme was found to be substantially less immunoreactive. Underscoring the enzyme's potential for practical utility, >90% of adherent, mucoid, Pseudomonas aeruginosa biofilms were removed from abiotic surfaces following a one hour treatment with the PEGylated variant, whereas the wild type enzyme removed only 75% of biofilms in parallel studies. In aggregate, these results demonstrate that site-specific mono-PEGylation of genetically engineered A1-III alginate lyase yielded an enzyme with enhanced performance relative to therapeutically relevant metrics.Cystic Fibrosis Foundation (Research Development Program)National Center for Research Resources (U.S.) (P20RR018787-06