211 research outputs found
ANALYSIS OF LAMINAR FORCED CONVECTION INSIDE A SQUARE VENTILATED CAVITY USING THE OPENFOAM®
Laminar forced convection inside a square cavity with inlet and outlet ports was numerically analyzed. The positions of the inlet and outlet ports were fixed and the ports sizes were equal 25% of the side wall. The influence of the Reynolds and Prandtl numbers on the flow and temperature fields inside the cavity was verified for nine cases, with Re = 50, 100 and 500 and Pr = 0.7, 3 and 5. The heat transfer process in the cavity was analyzed from obtained values for the average Nusselt number and the local Nusselt number on the walls. The open source computer package OpenFOAM® was used for simulations considering a two-dimensional flow. For all tested Prandtl numbers, there is a growth in the rotating vortex regions as Reynolds number is increases. The temperature fields are directly related to the presence of the rotating vortices and the temperature gradient is more noticeable at the interface sections of the throughflow stream with the neighboring vortices and the next to the walls for greater Reynolds and Prandtl numbers. It was verified that the local Nusselt number on the walls varies radically with minimum and maximum points and it is dependent on the flow and temperature fields adjacent to the respective wall. The results for average Nusselt number per wall indicated that the bottom wall is the most susceptible to variations in its average Nusselt number and that the top wall present higher values of this parameter for all tested cases. Finally, the average Nusselt number was increased with increasing the Reynolds and Prandtl numbers indicating the enhanced thermal exchange
NATURAL CONVECTION ON CORRUGATED PLATES: A NUMERICAL CASE STUDY ABOUT MESHES, BOUNDARY CONDITIONS AND PHYSICAL DOMAIN DETERMINATION
The transfer of heat and mass by natural convection is present in the most diverse physical and chemical phenomena of nature and engineering equipment. In the last decades, the number of research on natural convection has grown dramatically, highlighting studies in physical-mathematical modeling and numerical solutions, experimental analysis and design and optimization techniques for fluid-thermal systems. This case study analyzed the influence of several numerical parameters in physical-mathematical modeling and numerical solution of natural convection heat transfer problems on isothermal plates with square waves in turbulent conditions of high Rayleigh number. The numerical parameters analyzed were the mesh refinement degree, wall boundary conditions (with or without wall functions implemented in the turbulent parameters) and computational physical domain influence. Free and open-source computational numerical tools were exclusively used in the construction of this work. Meshes with wall functions implemented in turbulent parameters presented greater accuracy and required less computational effort and simulation time, besides enabling the use of a lower degree of mesh refinement. The best numerical configuration of the physical model for the situation problem studied were defined from the criteria of accuracy, computational effort demanded, and stability and numerical convergence of the solution
DIMENSIONLESS PHYSICAL-MATHEMATICAL MODELING OF TURBULENT NATURAL CONVECTION
Natural convection heat transfer is present in the most diverse applications of Thermal Engineering, such as in electronic equipment, transmission lines, cooling coils, biological systems, etc. The correct physical-mathematical modeling of this phenomenon is crucial in the applied understanding of its fundamentals and the design of thermal systems and related technologies. Dimensionless analyses can be applied in the study of flows to reduce geometric and experimental dependence and facilitate the modeling process and understanding of the main influence physical parameters; besides being used in creating models and prototypes. This work presents a methodology for dimensionless physical-mathematical modeling of natural convection turbulent flows over isothermal plates, located in an “infinite” open environment. A consolidated dimensionless physical-mathematical model was defined for the studied problem situation. The physical influence of the dimensionless numbers of Grashof, Prandtl, and Turbulent Prandtl was demonstrated. The use of the Theory of Dimensional Analysis and Similarity and its application as a tool and numerical device in the process of building and simplifying CFD simulations were discussed
Efeito da adubação nitrogenada no desempenho fisiológico de sementes de milho inoculadas com Azospirillum brasilense e Herbaspirillum seropedicae.
Serum DU-PAN-2 in the differential diagnosis of pancreatic cancer: influence of jaundice and liver dysfunction.
The usefulness of serum DU-PAN-2 in diagnosing pancreatic cancer and in distinguishing between this cancer and other benign and malignant diseases, and to assess the role of liver dysfunction in altering the serum levels of this marker were investigated. DU-PAN-2 was measured in the sera of 31 patients with pancreatic cancer, 32 with chronic pancreatitis, 20 with benign and 21 with malignant extra-pancreatic diseases. DU-PAN-2 was found to be above 300 U ml-1 in 21/31 patients with pancreatic cancer (sensitivity 68%). Only 3/32 patients with chronic pancreatitis had abnormal values. A substantial number of patients with both benign and malignant extra-pancreatic diseases had an elevated serum DU-PAN-2 (9/20 and 15/21, respectively). Correlations were found between DU-PAN-2 and (1) total bilirubin, (2) alanine-amino-transferase and (3) alkaline phosphatase. Of the patients with high DU-PAN-2 values, jaundice was found in: 2/3 with chronic pancreatitis, 9/10 with benign and 12/14 with malignant extra-pancreatic diseases. In conclusion, the serum DU-PAN-2 test for pancreatic malignancy is not completely satisfactory, because it is not sensitive enough. While the test for chronic pancreatitis has an acceptable specificity, the assay cannot distinguish between pancreatic cancer and other extra-pancreatic diseases, mainly of the liver and biliary tract. Liver dysfunction as well as jaundice seem to considerable affect the levels of this marker, as reported elsewhere for CA 19-9
Does silicon and salicylic acid contribute in the morphophysiology of Schinus terebinthifolia seedlings under flooding?
Abstract Flooding can damage the photosynthetic apparatus and initial growth of Schinus terebinthifolia. We aimed this study evaluates the potential of silicon (Si) and salicylic acid (SA) as mitigating agents on the ecophysiological responses and initial growth of S. terebinthifolia subjected to flooding periods. Seedlings were grown under the following conditions: 1) control (non-flooded): daily irrigation, 2) Flooded (F): storage of seedlings in a 500 L plastic pool, keeping the water depth at ± 2.0 cm above the substrate level, 3) F + 1.0 mM Si, 4) F + 2.0 mM Si, 5) F + 1.5 mM SA, and 6) F + 3.0 mM SA, and evaluated to 15 and 30 days. We observed that flooded seedlings formed hypertrophied lenticels on the stem on the 7th day as a stress adjustment strategy. S. terebinthifolia is sensitive to flooding, although it maintains a stable gas exchange for up to 15 days in this condition. The applications of 1.0 mM Si mitigated the pronounced decrease of gas exchange by 30 days. Using 1.0 mM Si and 3.0 mM SA contributed for integrity of the photosynthetic apparatus and to photochemical activities in the reaction centers, in addition favors to higher seedling biomass and quality under flooding. Foliar application of Si and SA is promising practice for photosynthetic metabolic and initial growth of S. terebinthifolia seedlings under flooded stress
ARMAZENAMENTO DE SEMENTES E SOMBREAMENTO NA EMERGÊNCIA E CRESCIMENTO INICIAL DAS MUDAS DE Magonia pubescens A. St.-Hil.
New segregates from the Neotropical genus Stryphnodendron (Leguminosae, Caesalpinioideae, mimosoid clade)
Non-monophyly is a prominent issue in mimosoid legumes, even in some of the less speciose genera such as the neotropical genus Stryphnodendron. This genus includes 35 species occurring from Nicaragua to Southern Brazil mostly in humid forests and savannas. Previous taxonomic studies of Stryphnodendron have highlighted morphologically distinct groups within the genus, recognized by differences on leaves (number of pinnae and size of leaflets), inflorescences (a simple or compound thyrse), and fruit types (legume, nucoid legume or follicle). Recent phylogenetic analyses have confirmed the non-monophyly of Stryphnodendron, supporting the recognition of three independent and morphologically well-delimited genera. Here we re-circumscribe Stryphnodendron and propose the two new genera Gwilymia and Naiadendron. In addition, we also provide an updated taxonomic account of the closely related genus Microlobius, including the proposal of a lectotype for the single species in the genus
- …