Stability analysis and response of nonlinear rotor-seal system

In this paper, we study the stability of the nonlinear rotor-seal system using Liapunov’s first method. The mathematical solutions using multiple scales up to and including second order approximations is investigated. We extract all resonance cases from analytical solution and investigated. It is quite clear that some of the simultaneous resonance cases are undesirable in the design of such system as they represent some of the worst behavior of the system. The effects of various parameters on the behavior of the system and stability of the system are investigated numerically by response curve. Poincaré maps are used to determine stability and plot bifurcation diagrams

Experimental research into the effect of some operation factors and rock properties on the rate of penetration

Purpose. The purpose of this research is to investigate the effect of weight on bit (WOB), rotary speed (RPM), and some rock properties on the rate of penetration (ROP). Methods. Four types of rock were collected from different sites in the south of Egypt (Aswan sandstone, Isawya limestone, Assiut limestone, and Minya marble). These tested samples were drilled by diamond core bit using a fixed laboratory diamond drilling machine under conditions (400 and 1200 rpm), and loads from 12 to 220 kg. WOB, ROP, torque (T) and specific energy (SE) were continuously observed during the drilling trials. The effect of these factors on ROP were examined. Water is used as a flushing and cooling medium. Findings. The effect of some operation factors on the penetration rate regarding mineral composition and different rock type was evaluated and the general equation was carried out to predict the suitable operation factor which gives the best penetration Rate. Originality. The effect of some operation factors on the penetration rate regarding mineral composition and different rock type was evaluated and the general equation was carried out to predict the suitable operation factor which gives the best penetration Rate. Practical implications. The Results demonstrated that ROP was inversely proportional to compressive strength (CS), tensile strength (TS), and density. It was also found that Aswan sandstone, Isawya limestone, Assiut limestone, and Minya marble have CS 111.94 MPa, 131.22 MPa, 125.0 MPa, and 502.5 MPa respectively. Was established that ROP was directly proportional to porosity. Increasing ROP in case of Aswan sandstone is associated with increase in porosity – 23.158%, and in case of Assiut limestone and Isawya limestone ROP is also associated with an increase in porosity – 19.9% and 17.93% respectively. Decreasing ROP in case of Minya marble is associated with decrease in porosity – 2.314%. So, we concluded that marble has lower ROP due to its higher CS, TS, and density and lower porosity than other tested rocks.Мета. Вивчення впливу комплексу основних експлуатаційних параметрів і ряду фізико-механічних властивостей порід на швидкість буріння в умовах різних родовищ Південного Єгипту. Методика. Були відібрані 4 типи порід з різних районів на півдні Єгипту (Асуанської піщаник, вапняк Ісав, Ассіутскій вапняк і мармур Міньї). Експериментальні зразки отримано на стаціонарній лабораторній буровій установці з алмазним долотом при швидкостях обертання 400 і 1200 об/хв та при навантаженнях від 12 до 220 кг. Під час експериментів постійно вимірювалися навантаження на долото, частота обертання, крутний момент на долоті й питома енергія, а також досліджувався вплив цих факторів на швидкість буріння. Як розчин для промивання і охолоджуючий агент використовувалася вода. Результати. Встановлено залежності швидкості буріння від навантаження на долото, питомої енергії та частоти обертання і питомої енергії. Виявлено, що для всіх чотирьох типів породи швидкість буріння збільшується з ростом навантаження на долото, в той час як питома енергія зменшується з ростом швидкості буріння. Розроблено ефективний спосіб прогнозування продуктивності бурової установки. Встановлено, що швидкість буріння обернено пропорційна міцності на стиск, міцності на розтягнення й щільності, а також змінюється прямо пропорційно пористості. Визначено, що менша швидкість буріння мармуру пов’язана з великими значеннями міцності на стиск, розтяг і щільність, а також з меншою пористістю у порівнянні з іншими досліджуваними породами. Наукова новизна. Встановлено нові закономірності взаємозв’язку експлуатаційних параметрів буріння з урахуванням різного типу породи (пісковик, вапняк, мармур) та її мінерального складу, а також обґрунтовано головну умову експлуатаційного фактору, який забезпечує оптимальну швидкість буріння. Практична значимість. Отримані результати дозволяють вибирати оптимальні параметри і режими буріння в процесі розвідки умов залягання родовищ Південного Єгипту, їх мінерального вмісту та стратиграфічних особливостей. Результати будуть корисними для проектних організацій, наукових інститутів з геології й розвідки, а також гірничих підприємств.Цель. Изучение влияния комплекса основных эксплуатационных параметров и ряда физико-механических свойств пород на скорость бурения в условиях пород различных месторождений Южного Египта. Методика. Были отобраны 4 типа пород из различных районов на юге Египта (Асуанский песчаник, известняк Исавии, Ассиутский известняк и мрамор Миньи). Экспериментальные образцы получены на стационарной лабораторной буровой установке с алмазным долотом при скоростях вращения 400 и 1200 об/мин и при нагрузках от 12 до 220 кг. Во время экспериментов постоянно измерялись нагрузки на долото, частота вращения, крутящий момент на долоте и удельная энергия, а также и исследовалось влияние этих факторов на скорость бурения. В качестве промывочного раствора и охлаждающего агента использовалась вода. Результаты. Установлены зависимости скорости бурения от нагрузки на долото, удельной энергии и частоты вращения и удельной энергии. Выявлено, что для всех четырех типов породы скорость бурения увеличивается с ростом нагрузки на долото, в то время как удельная энергия уменьшается с ростом скорости бурения. Разработан эффективный способ прогнозирования производительности буровой установки. Установлено, что скорость бурения обратно пропорциональна прочности на сжатие, прочности на растяжение и плотности, а также изменяется прямо пропорционально пористости. Определено, что меньшая скорости бурения мрамора связана с большими значениями прочности на сжатие, растяжение и плотности, а также с меньшей пористостью по сравнению с другими исследуемыми породами. Научная новизна. Получены новые закономерности взаимосвязи эксплуатационных параметров бурения с учетом различного типа породы (песчаник, известняк, мрамор) и ее минерального состава, а также обосновано главное условие эксплуатационного фактора, который обеспечивает оптимальную скорость бурения. Практическая значимость. Полученные результаты позволяют выбирать оптимальные параметры и режимы бурения в процессе разведки условий залегания месторождений Южного Египта, их минерального содержание и стратиграфических особенностей. Результаты будут полезными для проектных организаций, научных институтов по геологии и разведке, а также горных предприятий.Our sincere gratitude for Mining and Metallurgical Engineering Dept. Faculty of Engineering, Assiut, Egypt for invaluable assistance to upgrade and guidance to completed this article

Geophysical investigations of a geothermal anomaly at Wadi Ghadir, eastern Egypt

During regional heat flow studies a geothermal anomaly was discovered approximately 2 km from the Red Sea coast at Wadi Ghadir, in the Red Sea Hills of Eastern Egypt. A temperature gradient of 55 C/km was measured in a 150 m drillhole at this location, indicating a heat flow of approximately 175 mw/sqm, approximately four times the regional background heat flow for Egypt. Gravity and magnetic data were collected along Wadi Ghadir, and combined with offshore gravity data, to investigate the source of the thermal anomaly. Magnetic anomalies in the profile do not coincide with the thermal anomaly, but were observed to correlate with outcrops of basic rocks. Other regional heat flow and gravity data indicate that the transition from continental to oceanic type lithosphere occurs close to the Red Sea margin, and that the regional thermal anomaly is possibly related to the formation of the Red Sea

New types of generalizations of θ-closed sets

The aim of this paper is to introduce and study the class of T-closed sets as a generalization of θ-closed sets, which is properly placed between θ-closed sets and closed sets. A generalization of T-closed sets, namely, generalized T-closed sets is introduced and studied, which is properly placed between T-closed sets and g-closed sets

RESTful Web Service USAge for Online Exit-survey at Syiah Kuala University as Data Verification Method

Many applications are developed and deployed in Syiah Kuala University main server. These applications and information system are built as tools to help the University' daily activities. Most of these applications have its own database. As a result, data is inconsistent, and the worst is redundant data cannot be avoided. The idea behind of this research is to build one centralized data that can be used as baseline to other applications. Since the main data of Syiah Kuala University are located behind the proxy which is no internet direct access allowed to the data. The proposed method to answer this problem is touse web service as a gateway for data transfer. This technique keeps the database from direct external access but the data itself can be seen without knowing where the real data is. This method has been used for Online Exit-Survey to proof that the system can verify the students' data. Some student cannot be identified because their data were empty, the other because the data in centralized database server were only prepared for undergraduate students, so that the post graduate and professional students cannot be verified. For undergraduate students this online exit-survey works fine without error on verification phas

Biomarkers charge-transfer complexes of melamine with quinol and picric acid: Synthesis, spectroscopic, thermal, kinetic and biological studies

AbstractTwo new melamine (MA) charge transfer complexes with quinol and picric acid in aqua media have been synthesized and structurally characterized. The obtained complexes with the general formula [(MA)(acceptor)2] with a 2:1 acceptor:donor molar ratio. Elemental analysis (CHN), electronic spectra, photometric titration, mid infrared spectra, 1H NMR spectra and thermogravimetric analysis (TG) were used to predict the position of the charge transfer interaction between the donating and accepting sites. The MA CT-complexes were antimicrobial assessment against two kinds of bacterial and fungal species

Preparation, spectroscopic, thermal and molecular docking studies of covid-19 protease on the manganese(II), iron(III), chromium(III) and cobalt(II) creatinine complexes

ABSTRACT. Creatinine biomolecule has three different coordination modes through the (exocyclic O(5) and ring N(1)), (imine N(2) and ring N(1)) or as monodentate ligand via exocyclic O(1)). The FTIR and electronic spectra of the synthesized manganese(II), iron(III), chromium(III), and cobalt(II) complexes consistent with the coordinated behavioral derived from the structural analyses. Thermogravimetric data agree with the stoichiometry and proposed formulas [Mn(C4H7N3O)2(Cl)2]4H2O, [Fe(C4H7N3O)2(Cl)2]Cl.6H2O, [Cr(C4H7N3O)2(Cl)2]Cl.6H2O, and [Co(C4H7N3O)2(Cl)2]6H2O. Four new transition metal complexes derived from the reaction of creatinine chelate and metal salt (MnCl2.4H2O, FeCl3.6H2O, CrCl3.6H2O, and CoCl2.6H2O), were prepared with 1:2 (metal: ligand) stoichiometry, isolated and well characterized by a different spectral and analytical techniques including FTIR, UV/Vis, magnetic susceptibility, molar conductance, elemental analysis, and TGA/DrTGA/DTA. The solid complexes were formed with the binding of the creatinine ligand through exocyclic O(5) and ring N(1) and presented as an octahedral geometry. In addition molecular docking calculations have been performed between complexes of manganese(II), iron(III), chromium(III) and cobalt(II) with creatinine biomolecule ligand with the Covid-19 protease (6LU7) to determine the best binding site and its inhibitory effect.                     KEY WORDS: Creatinine, Coordination, Transition metals, TGA/DTA, Octahedral geometry   Bull. Chem. Soc. Ethiop. 2021, 35(2), 399-412. DOI: https://dx.doi.org/10.4314/bcse.v35i2.1

Multiagent Based Tsunami Evacuation Simulation: a Conceptual Model

During emergency situation, such as a large-scale tsunami or other disastrousevents, people evacuation may lead to more fatalities when it is conducted without a proper escape strategy. The ability to evacuate a huge number of people within a very limited amount of time is certainly required. Evacuation drills are therefore necessary to acquire an optimal escape strategy. Unfortunately, we have to deal with both financial and practicalchallenges for conducting a regular and meaningful drill. To overcome these challenges, one solution would be to develop the evacuation simulation model. Despite its limitation to mimic the real-life situations, simulation may provide practical ways of minimizing the negative consequences as well as useful insights to escape strategy. In this paper, we describe a conceptual model of multiagent based tsunami evacuation simulation (TES). The model formulation and description would follow the ODD (Overview, Design concepts, andDetails) protocol, which is a standard protocol widely used by agent-based modellers. The proposed model may serve as a framework for TES that offers the following features: estimate the clearing time or the time needed by people to leave the tsunami inundation area, and identify the potential bottleneck or congestion locations. Using the proposed conceptual model, we consider constructing the TES for Calang district, a coastal area in Aceh Jaya regency, for future wor

Active vibration suppression of a nonlinear electromechanical oscillator system with simultaneous resonance

In this paper, we explored the nonlinear dynamics behavior and vibration suppression of a nonlinear electromechanical oscillator system under harmonic and parametric excitation. The model comprises of an electrical part coupled to mechanical part and displayed by a coupled nonlinear ordinary differential equations. The analytical up to second order approximate solutions are sought applying the method of multiple scales method. We utilized the time-series and method of averaging to analyze the response and stability of the solutions at the worst resonance cases. We checked the results of perturbation solution through numerical simulations and the effects of different system parameters have been reported. Comparison between analytical and numerical solutions is obtained. Also, the numerical results are obtained using MAPLE and MATLAB algorisms