754 research outputs found
Маркшейдерська школа Національного гірничого університету
Викладена історія створення та розвитку маркшейдерської школи в НГУ протягом 110 років.Изложена история создания и развития маркшейдерской школы в НГУ в течение 110 лет.History of creation and development ofsurveyor school is expounded in NMU during 110 years
Luminescence and formation of alkali-halide ionic excimers in solid Ne and Ar
Transitions from ionic states A²⁺X– of alkalihalides CsF, CsCl and RbF isolated in solid Ne and Ar films recorded under pulsed e-beam excitation are studied. The B(²∑₁/₂)-X(²∑₁/₂) and C(²П₃/₂)-A(²П₃/₂) luminescence bands of Cs2+F– (196.5 nm, 227 nm), Cs²⁺Cl– (220.1 nm, 249.2 nm) and Rb²⁺F– (136 nm) in Ne, and a weakerB–X emission of Cs²⁺F– (211.2 nm) in Ar are identified. For CsF the depopulation of the A²⁺X– state is dominated by the radiative decay. A ratio of the recorded exciplex emission intensities of I(CsF)/I(CsCl)/I(RbF) = 20/5/1 reflects the luminescence efficiency and for RbF and CsCl a competitive emission channel due to predissociation in the A²⁺X⁻(B²∑₁/₂) state is observed. For these molecules an efficient formation of the state X*₂ is confirmed through recording the molecular D`(³П₂g)-A`(³П₂u) transition. A strong dependence of the luminescence intensities on the alkalihalide content reveals quenching at concentrations higher than 0.7%
Surface Oscillations in Overdense Plasmas Irradiated by Ultrashort Laser Pulses
The generation of electron surface oscillations in overdense plasmas
irradiated at normal incidence by an intense laser pulse is investigated.
Two-dimensional (2D) particle-in-cell simulations show a transition from a
planar, electrostatic oscillation at , with the laser
frequency, to a 2D electromagnetic oscillation at frequency and
wavevector . A new electron parametric instability, involving the
decay of a 1D electrostatic oscillation into two surface waves, is introduced
to explain the basic features of the 2D oscillations. This effect leads to the
rippling of the plasma surface within a few laser cycles, and is likely to have
a strong impact on laser interaction with solid targets.Comment: 9 pages (LaTeX, Revtex4), 4 GIF color figures, accepted for
publication in Phys. Rev. Let
Role of surface roughness in hard x-ray emission from femtosecond laser produced copper plasmas
The hard x-ray emission in the energy range of 30-300 keV from copper plasmas
produced by 100 fs, 806 nm laser pulses at intensities in the range of
10 W cm is investigated. We demonstrate that surface
roughness of the targets overrides the role of polarization state in the
coupling of light to the plasma. We further show that surface roughness has a
significant role in enhancing the x-ray emission in the above mentioned energy
range.Comment: 5 pages, 4 figures, to appear in Phys. Rev.
Spectral shaping of laser generated proton beams
The rapid progress in the field of laser particle acceleration has stimulated a debate about the promising perspectives of laser based ion beam sources. For a long time, the beams produced exhibited quasi-thermal spectra. Recent proof-of-principle experiments demonstrated that ion beams with narrow energy distribution can be generated from special target geometries. However, the achieved spectra were strongly limited in terms of monochromacity and reproducibility. We show that microstructured targets can be used to reliably produce protons with monoenergetic spectra above 2 MeV with less than 10% energy spread. Detailed investigations of the effects of laser ablation on the target resulted in a significant improvement of the reproducibility. Based on statistical analysis, we derive a scaling law between proton peak position and laser energy, underlining the suitability of this method for future applications. Both the quality of the spectra and the scaling law are well reproduced by numerical simulations
Factors Associated with the Rapid and Durable Decline in Malaria Incidence in El Salvador, 1980-2017
A decade after the Global Malaria Eradication Program, El
Salvador had the highest burden of malaria in Mesoamerica, with
approximately 20% due to Plasmodium falciparum. A resurgence of
malaria in the 1970s led El Salvador to alter its national
malaria control strategy. By 1995, El Salvador recorded its last
autochthonous P. falciparum case with fewer than 20 Plasmodium
vivax cases annually since 2011. By contrast, its immediate
neighbors continue to have the highest incidences of malaria in
the region. We reviewed and evaluated the policies and
interventions implemented by the Salvadoran National Malaria
Program that likely contributed to this progress toward malaria
elimination. Decentralization of the malaria program, early
regional stratification by risk, and data-driven
stratum-specific actions resulted in the timely and targeted
allocation of resources for vector control, surveillance, case
detection, and treatment. Weekly reporting by health workers and
volunteer collaborators-distributed throughout the country by
strata and informed via the national surveillance system-enabled
local malaria teams to provide rapid, adaptive, and focalized
program actions. Sustained investments in surveillance and
response have led to a dramatic reduction in local transmission,
with most current malaria cases in El Salvador due to
importation from neighboring countries. Additional support for
systematic elimination efforts in neighboring countries would
benefit the region and may be needed for El Salvador to achieve
and maintain malaria elimination. El Salvador's experience
provides a relevant case study that can guide the application of
similar strategies in other countries committed to malaria
elimination
Upgraded sublimation energy determination procedure for icy films
“NOTICE: this is the author’s version of a work that was accepted for publication in . Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in VACUUM, [VOL 86, ISSUE 12, (2012-06)] DOI10.1016/j.vacuum.2012.05.010¨A method to determine the sublimation energy of a bulk ice in high vacuum systems, allowing other simultaneous analysis techniques, is presented. Variation in frequency of a quartz crystal microbalance, due to sublimating material, during a zeroth-order desorption consents to obtain this energy. CO 2 sublimation energy is obtained to check this method, its value is coherent with that reported in the literature. Our method permits to simplify the setup used so far by other authors, and to obtain relevant parameters for ices simultaneously. The procedure explained here corrects the temperature frequency dependence of the microbalance and the effect of contaminants by using a unique microbalance. © 2012 Elsevier Ltd. All rights reserved.This work was supported by the Ministerio de Educacion y Ciencia (Co-financed by FEDER funds) AYA 2004-05382 and AYA 2007-65899.Luna Molina, R.; Millán Verdú, C.; Domingo Beltran, M.; Santonja Moltó, MDC.; Satorre Aznar, MÁ. (2012). Upgraded sublimation energy determination procedure for icy films. Vacuum. 86(12):1969-1973. https://doi.org/10.1016/j.vacuum.2012.05.010S19691973861
Mass movement deposits in the 3.6 Ma sediment record of Lake El'gygytgyn, Far East Russian Arctic
This paper focuses on the characterization and genesis of mass movement deposits (MMDs) in the Quater- nary and Pliocene sediments of Lake El’gygytgyn, Far East Russian Arctic. Three partly overlapping holes were drilled into the 320 m long sediment record at International Conti- nental Scientific Drilling Program (ICDP) Site 5011-1 in the lake basin, recovering the Quaternary almost completely, and the Pliocene down to 3.6 Ma with 52 % recovery. Mass move- ment deposits were investigated in all three cores, based on macroscopical core descriptions, radiographic images, high- resolution magnetic susceptibility and gamma-ray density. Five different types of MMDs were identified: turbidites, grain-flow deposits, debrites, slumps and slides. These are formed by transitional mass movement processes, and thus can be co-generic. An initial slope failure is thought to trans- form into a debris flow that deforms frontal sediments, partly disintegrates and dilutes into a turbidity flow. Turbidites are by far the most frequent MMD type in the lake center. They occur throughout the record in all pelagic sedimentary fa- cies, but they are thinner in facies formed during cold cli- mate conditions. All other MMDs, by contrast, incise exclu- sively the pelagic facies deposited during warm climates. In the 123 m thick Quaternary composite sediment record 230 mass movement events are identified, comprising 33% of the sediment length. Turbidites contribute 93 % of the num- ber of Quaternary MMDs, but only 35 % of their thickness. In the Pliocene sediments between 123 and 320 m, 181 ad- ditional mass movement deposits are identified, which con- stitute ⇠ 33 % of the recovered sediments. The mean recur- rence interval for MMDs is 11 and 5 ka in the Quaternary and Pliocene, respectively
Characterization of silicon carbide surfaces of 6H- 15R- and 3Cpolytypes by optical second-harmonic generation in comparison with X-ray diffraction techniques
Abstract. Second-harmonic (SH) generation is a versatile method applicable to in-situ characterization of even noncentrosymmetric media like silicon carbide (SiC). In particular, the azimuthal rotational anisotropy of the SH response from SiC observed in reflection allows identification of various polytypes. The nonlinear-optical results are compared to X-ray diffraction data. The abundance of information obtained through the SH studies makes characteristic fingerprinting of the 6H, 15R, and 3C polytypes of SiC is possible. The spatial resolution of the optical sampling was about 50 µm in the lateral direction with a typical penetration depth of 100 nm for the fundamental radiation. Defect regions of different crystallographic structures in large SiC samples were identified by observing the spatially resolved dependence of the SH intensity. 42.65.Nx; 78.66; 42.70.N Silicon carbide (SiC) is a widely studied semiconductor that crystallizes in over 200 known polytypes. The most common structure is α-SiC, which consists of a mixture of hexagonal polytypes (6H, 4H) and the rhombohedral polytype 15R PACS: As already demonstrated in other studies on centrosymmetric materials like silicon, second-harmonic generation (SHG) has proved to be a sensitive tool for studying a large variety of surface and interface structural and electronic properties. Although SHG from non-centrosymmetric materials is not restricted to the surface but is also possible in the bulk material SHG studies in reflection geometry provide substantial crystallographic information on the near-surface region. The generation depth of the second-harmonic (SH) radiation detected in reflection of approximately λ/2π, where λ is the fundamental wavelength, allows higher surface specificity, as compared to the typical interaction lengths of several micrometers in conventional X-ray diffraction techniques in back-reflection geometry (X-ray examination of SiC cf. [4]). The tensorial properties of the second-order susceptibility, which characterizes the SHG effect, provide information on the crystal structure in case of non-centrosymmetric materials in the near-surface region by investigating its azimuthal rotational anisotropy. Although studies on non-centrosymmetric gallium arsenide (GaAs) demonstrated sensitively surface reconstruction changes In the present work, we demonstrate that SHG is a versatile tool to characterize the crystalline structure of SiC. By investigating the rotational anisotropy of the SH response of various polytypes of SiC, we could fingerprint the most important species 6H, 15R and 3C, which are revealed by different crystalline structures. We were also able to distinguish between bulk and surface contributions to the SH signal from cubic and hexagonal SiC by differences in the rotationa
Multijoule scaling of laser-induced condensation in air
Using 100 TW laser pulses, we demonstrate that laser-induced nanometric
particle generation in air increases much faster than the beam-averaged
incident intensity. This increase is due to a contribution from the photon
bath, which adds up with the previously identified one from the filaments and
becomes dominant above 550 GW/cm2. It appears related to ozone formation via
multiphotondissociation of the oxygen molecules and demonstrates the critical
need for further increasing the laser energy in view of macroscopic effects in
laser-induced condensation
- …