815 research outputs found
Early hospital readmissions postâkidney transplantation are associated with inferior clinical outcomes
Unplanned hospital readmissions are common early postâkidney transplantation. We investigated the relationship between early hospital readmissions and clinical outcomes in a singleâcenter retrospective study that included all adult kidney transplant patients between 2004 and 2008 with followâup to December 2012. The early hospital readmissions within the first 30 d were numbered and the diagnosis ascertained. Patients were grouped as none, once, and twice or more readmissions. Predictors of early readmissions were assessed, and clinical outcomes and patient and deathâcensored kidney survival were compared. Among 1064 patients, 203 (19.1%) patients had once and 83 (7.8%) patients had twice or more readmissions within 30 d. Surgical complications, infections, and acute kidney injuries/acute rejection were three most common diagnoses. The length of initial hospital stay and African American race were among the variables associated significantly with readmissions. Patients with early readmissions had lower baseline renal function (p < 0.01) and more early acute rejection (p < 0.01). During followâup, only frequent readmissions, twice or more, within 30 d were associated with increased risk of death ( AHR 1.75, p  =  0.01) and deathâcensored kidney failure ( AHR 2.20, p < 0.01). Frequent early hospital readmissions postâtransplantation identify patients at risk for poor longâterm outcomes, and more studies are needed to understand the mechanisms.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/106830/1/ctr12347.pd
Origin of superimposed and curved slickenlines in San Miguelito range, Central MĂ©xico
Interactions between intersecting faults cause local perturbations of the stress field in the vicinity of their intersections. Fault intersections are places of stress accumulation, stress relief and refraction of the stress trajectories; the slip vectors near these intersections are deviated from the maximum shear stress resolved by the far-field stress. In an intersecting fault system, superimposed, arc-shaped and zigzag slickenlines can be formed due to interaction between intersecting faults. We propose some mechanisms in which it is possible to recognize that the superimposed and curved slickenlines are produced from curvilinear translational fault motion. The geometrical models presented in this contribution are consistent with the slickenlines distribution observed in the vicinity of intersection lines, measured in the San Miguelito range, Mesa Central, MĂ©xico. Two tectonic phases have been inferred from our slip vector models near the intersection lines, which is consistent with observations of previously published work
Tilting mechanisms in domino faults of the Sierra de San Miguelito, central Mexico
A system of normal faults with similar strike that bound rotated blocks in the Sierra de San Miguelito, central Mexico, was studied to determine the genesis of rotation and to estimate the extensional strain. We show that rigid-body rotation was not the main deformation mechanism of the domino faults in this region. We propose vertical or inclined shear accommodated by slip on minor faults as the mechanism for strain in the blocks. In order to test quantitatively the amount of strain, we calculated the extension assuming vertical shear obtaining ca. ev ~0.20. This value is in good agreement with extensions previously reported for the Mesa Central of MĂ©xico. The bed extension required in this model reaches ca. 33% of the total horizontal extension (i. e. ebed =0.34 ev). Assuming self-similar geometry for fault displacements, it is shown that bed strain required in shear models can be liberated by the small faults. If the strain is calculated using the rigid-body rotation model, the lengthening is underestimated by up to 9%. This case study shows that shear models could be applied in volcanic zones
SIDM on FIRE: Hydrodynamical Self-Interacting Dark Matter simulations of low-mass dwarf galaxies
We compare a suite of four simulated dwarf galaxies formed in 10 haloes of collisionless Cold Dark Matter (CDM) with galaxies
simulated in the same haloes with an identical galaxy formation model but a
non-zero cross-section for dark matter self-interactions. These cosmological
zoom-in simulations are part of the Feedback In Realistic Environments (FIRE)
project and utilize the FIRE-2 model for hydrodynamics and galaxy formation
physics. We find the stellar masses of the galaxies formed in Self-Interacting
Dark Matter (SIDM) with are very similar to those in CDM
(spanning ) and all runs lie on a
similar stellar mass -- size relation. The logarithmic dark matter density
slope () in the central pc remains
steeper than for the CDM-Hydro simulations with stellar mass
and core-like in the most massive galaxy.
In contrast, every SIDM hydrodynamic simulation yields a flatter profile, with
. Moreover, the central density profiles predicted in SIDM runs
without baryons are similar to the SIDM runs that include FIRE-2 baryonic
physics. Thus, SIDM appears to be much more robust to the inclusion of
(potentially uncertain) baryonic physics than CDM on this mass scale,
suggesting SIDM will be easier to falsify than CDM using low-mass galaxies. Our
FIRE simulations predict that galaxies less massive than provide potentially ideal targets for discriminating models,
with SIDM producing substantial cores in such tiny galaxies and CDM producing
cusps.Comment: 10 Pages, 7 figures, submitted to MNRA
Numerical analysis of the manufacturing processes of a mock-up of the ITER NHF First Wall Panel
The objective of ITER is to build a new Tokamak, with the goal of demonstrating the scientific and technical feasibility of fusion power. The First Wall Panels are the inner component of the reactor, built with different materials that must support high heat flux levels inside the vacuum vessel. The manufacturing processes of the First Wall are a complex procedure including bending, hipping and cutting procedures which, in general, lead to residual stresses and distortions of the fabricated component. In this work, the analysis of the thermo-mechanical response of a simplified prototype of the ITER NHF First Wall Panel is presented from the numerical point of view. The experimental procedure within each phase of the whole manufacturing process is described. Residual stresses and distortions have been measured and analyzed. The numerical simulation of the manufacturing process includes the description of the main hypothesis, the applied loads and the boundary conditions assumed at every stage of the process. Special attention is paid to the simulation of machining and cutting by means of an ad-hoc element deactivation strategy. The numerical results are compared with the experimental evidence to show the prediction capability and the limitations of the proposed numerical model
Origin of superimposed and curved slickenlines in San Miguelito range, Central MĂ©xico
Interactions between intersecting faults cause local perturbations of the stress field in the vicinity of their intersections. Fault intersections are places of stress accumulation, stress relief and refraction of the stress trajectories; the slip vectors near these intersections are deviated from the maximum shear stress resolved by the far-field stress. In an intersecting fault system, superimposed, arc-shaped and zigzag slickenlines can be formed due to interaction between intersecting faults. We propose some mechanisms in which it is possible to recognize that the superimposed and curved slickenlines are produced from curvilinear translational fault motion. The geometrical models presented in this contribution are consistent with the slickenlines distribution observed in the vicinity of intersection lines, measured in the San Miguelito range, Mesa Central, MĂ©xico. Two tectonic phases have been inferred from our slip vector models near the intersection lines, which is consistent with observations of previously published work
Numerical simulation of strongly nonlinear and dispersive waves using a Green-Naghdi model
We investigate here the ability of a Green-Naghdi model to reproduce strongly
nonlinear and dispersive wave propagation. We test in particular the behavior
of the new hybrid finite-volume and finite-difference splitting approach
recently developed by the authors and collaborators on the challenging
benchmark of waves propagating over a submerged bar. Such a configuration
requires a model with very good dispersive properties, because of the
high-order harmonics generated by topography-induced nonlinear interactions. We
thus depart from the aforementioned work and choose to use a new Green-Naghdi
system with improved frequency dispersion characteristics. The absence of dry
areas also allows us to improve the treatment of the hyperbolic part of the
equations. This leads to very satisfying results for the demanding benchmarks
under consideration
Efficiency of the traditional practice of traps to stimulate black truffle production, and its ecological mechanisms
The black truffle Tuber melanosporum was disseminated all over the world, propelled by the development of a wide variety of empirical practices. A widespread practice, called âtruffle trapâ, consists of placing pieces of truffles into excavations dug under host trees, and of collecting truffle in these traps in the next years. This research aims at (1) evaluating the effect of this practice on fruitbody production based on the analysis of 9924 truffle traps installed in 11 orchards across T. melanosporum native area in France and (2) exploring the mechanisms involved in fruitbody emergence using traps where the genotypes of introduced truffles were compared with those of fruitbodies collected in the same traps. We confirmed that truffle traps provide a major and highly variable part of truffle ground production, representing up to 89% of the collected fruitbodies. We evidenced a genetic link between introduced spores and collected fruitbodies, and then demonstrated that truffle growers provide paternal partners for mating with local maternal mycelia. We also highlighted that soil disturbance stimulate the vegetative development of established maternal mycelia. This research supports that a widely used traditional practice enhances fruitbody production by shaping favorable conditions and providing sexual partners required for fruiting.info:eu-repo/semantics/publishedVersio
Large time wellposdness to the 3-D Capillary-Gravity Waves in the long wave regime
In the regime of weakly transverse long waves, given long-wave initial data,
we prove that the nondimensionalized water wave system in an infinite strip
under influence of gravity and surface tension on the upper free interface has
a unique solution on [0,{T}/\eps] for some \eps independent of constant
We shall prove in the subsequent paper \cite{MZZ2} that on the same time
interval, these solutions can be accurately approximated by sums of solutions
of two decoupled Kadomtsev-Petviashvili (KP) equations.Comment: Split the original paper(The long wave approximation to the 3-D
capillary-gravity waves) into two parts, this is the first on
- âŠ