Investigation and Comparison between New Satellite Impact Test Results and NASA Standard Breakup Model

This paper summarizes two new satellite impact tests conducted in order to investigate on the outcome of low- and hyper-velocity impacts on two identical target satellites. The first experiment was performed at a low velocity of 1.5 km/s using a 40-gram aluminum alloy sphere, whereas the second experiment was performed at a hyper-velocity of 4.4 km/s using a 4-gram aluminum alloy sphere by two-stage light gas gun in Kyushu Institute of Technology. To date, approximately 1,500 fragments from each impact test have been collected for detailed analysis. Each piece was analyzed based on the method used in the NASA Standard Breakup Model 2000 revision. The detailed analysis will conclude: 1) the similarity in mass distribution of fragments between low and hyper-velocity impacts encourages the development of a general-purpose distribution model applicable for a wide impact velocity range, and 2) the difference in area-to-mass ratio distribution between the impact experiments and the NASA standard breakup model suggests to describe the area-to-mass ratio by a bi-normal distribution

Remarks on the stability of the Navier-Stokes equations supplemented with stress-free boundary conditions

The purpose of this note is to analyze the long term stability of the Navier-Stokes equations supplemented with the Coriolis force and the stress-free boundary condition. It is shown that, if the flow domain is axisymmetric, spurious stability behaviors can occur depending whether the Coriolis force is active or not

Optically induced magnetization dynamics and variation of damping parameter in epitaxial Co2MnSi Heusler alloy films

Copyright © 2010 The American Physical SocietyAll-optical pump-probe measurements of magnetization dynamics have been performed upon epitaxial Co2MnSi(001) Heusler alloy thin films annealed at temperatures of 300, 400, and 450 °C. An ultrafast laser-induced modification of the magnetocrystalline anisotropy triggers precession which is detected by time-resolved magneto-optical Kerr effect measurements. From the damped oscillatory Kerr rotation, the frequency and relaxation rate of the precession is determined. Using a macrospin solution of the Landau-Lifshitz-Gilbert equation the effective fields acting upon the sample magnetization are deduced. This reveals that the magnetization is virtually independent of the annealing temperature while the fourfold magnetocrystalline anisotropy decreases dramatically with increasing annealing temperature as the film structure changes between the B2 and L21 phases. From the measured relaxation rates, the value of the apparent Gilbert damping parameter is found to depend strongly upon the static field strength and in-plane static field orientation. The variation of the apparent damping parameter is generally well reproduced by an inhomogeneous broadening model in which the presence of B2 and L21 phases leads to a large dispersion of the magnetocrystalline anisotropy. However, for the sample annealed at a temperature of 300 °C, the lack of a detailed fit to the data suggests that the apparent anisotropy of the apparent damping parameter might alternatively arise due to a network of dislocations with fourfold symmetry

Practical Use of a Liquid Helium-Free Superconducting Magnet(Magnet Technology)

A cryocooler-cooled 4.6 T superconducting magnet with a 38 mm room temperature bore, which consists of a low-T_c Nb_3Sn coil and high-T_c Bi_2Sr_2Ca_2Cu3O_ current leads, has been working in vacuum for about 18000 cooling hours without trouble, It is found that the high-T_c current leads can hold excellent superconducting properties for a long enough time to be practically used. As a next step, we have succeeded in the construction of a l0.7 T-52 mm room temperature bore and a 5.7 T-220 mm room temperature bore liquid helium-free superconducting magnet

Extensive study of giant magnetoresistance properties in half-metallic Co₂(Fe,Mn)Si-based devices

Fully epitaxial Co₂FexMn1- xSi(CFMS)/Ag/Co₂FexMn1 -xSi current-perpendicular-to-plane giant magnetoresistive devices with various Fe/Mn ratios x and top CFMS layer thicknesses t CFMS were prepared. The highest magnetoresistance (MR) ratios, 58% at room temperature and 184% at 30 K, were observed in the sample with x = 0.4 and tCFMS = 3 nm. Enhancement of interface spin-asymmetry was suggested for x = 0.4 compared with that at x = 0. A MR ratio of 58% was also observed even in a very thin trilayer structure, CFMS(4 nm)/Ag(3 nm)/CFMS(2 nm), which is promising for a next-generation magnetic read sensor for high-density hard disk drives. © 2012 American Institute of Physics.Y. Sakuraba, M. Ueda, Y. Miura, K. Sato, S. Bosu, K. Saito, M. Shirai, T. J. Konno, and K. Takanashi, "Extensive study of giant magnetoresistance properties in half-metallic Co₂(Fe,Mn)Si-based devices", Appl. Phys. Lett. 101, 252408 (2012) https://doi.org/10.1063/1.4772546