Ion-scale spectral break of solar wind turbulence at high and low beta

The power spectrum of magnetic fluctuations in the solar wind at 1 AU displays a break between two power laws in the range of spacecraft-frame frequencies 0.1 to 1 Hz. These frequencies correspond to spatial scales in the plasma frame near the proton gyroradius ρi and proton inertial length di. At 1 AU it is difficult to determine which of these is associated with the break, since [Formula: see text] and the perpendicular ion plasma beta is typically β⊥i∼1. To address this, several exceptional intervals with β⊥i≪1 and β⊥i≫1 were investigated, during which these scales were well separated. It was found that for β⊥i≪1 the break occurs at di and for β⊥i≫1 at ρi, i.e., the larger of the two scales. Possible explanations for these results are discussed, including Alfvén wave dispersion, damping, and current sheets

Vesicovaginal fistula following an induced abortion with a huge bladder stone: case report

A case of a 26 year old P +1 woman who developed vesico-vaginal fistula (VVF) following an induced 1 abortion is presented. She presented with five year history of continous leakage of urine following a voluntary termination of pregnancy at about 11 weeks of gestation using metallic instruments in a chemist shop by a Nurse. When she was examined, she had a suprapubic mass of about 14 weeks size, tender and mobile. Pelvic examination revealed a 1.5 x 2.0cm juxta cervical fistula with healthy looking cervix. Abdominopelvic ultrasound scan showed a huge bladder stone that measured 10 x 15cm. She had cystolithotomy and fistula repair transvaginally and was discharged home after 21 days of admission.Keywords: Vesico-vaginal fistula, induced abortion, bladder stoneJos Journal of Medicine, Volume 7 No.

Compositional nonblocking verification with always enabled events and selfloop-only events

This paper proposes to improve compositional nonblocking verification through the use of always enabled and selfloop-only events. Compositional verification involves abstraction to simplify parts of a system during verification. Normally, this abstraction is based on the set of events not used in the remainder of the system, i.e., in the part of the system not being simplified. Here, it is proposed to exploit more knowledge about the system and abstract events even though they are used in the remainder of the system. Abstraction rules from previous work are generalised, and experimental results demonstrate the applicability of the resulting algorithm to verify several industrial-scale discrete event system models, while achieving better state-space reduction than before

Deformation capturing of concrete structures at elevated temperatures

Reliable deformation measurement is required for proper quantification of fire performance of concrete structures. Predictive capability of models for many critical properties, including Young’s moduli, stress-strain relationships and load-induced thermal strains, is first and foremost dependent on such reliable deformation capturing. This paper first presents a state-of-the-art review of existing methods for capturing deformation of concrete structures at elevated temperatures. Key merits, limitations and challenges associated with each measuring technique are discussed. It is shown that existing testing facilities and measuring instruments generally do not allow reliable direct measurement of deformation and strain of high-temperature concrete. As a result, the deformation has typically been captured either indirectly or outside the heated zones, inevitably introducing additional uncertainty and errors that are difficult to be adequately quantified. On the basis of that review, the paper details a new test set-up for reliable non-contact full-field deformation capturing of concrete structures at high temperatures using 3D Digital Image Correlation technique. Key features of the new setup that enable to successfully address major challenges of thermal boundary condition, thermal stability of speckle pattern, contrast of image and hot air movement are presented; together with evidences giving confidence to the reliability of such set-up. With its combined advantages of reliable full-field deformation capturing and thermal boundary conditions on test specimens, the new set-up allows to generate required reliable data on performance of concrete at elevated temperatures, thereby facilitating the development of effective rational fire design and analysis of concrete structures

Effect of particle size on the measurement of the apparent contact angle in sand of varying wettability under air-dried conditions

Session: Advances in Experimental Methods: Mechanical PropertiesChanges in the wettability of soil are known to affect several processes such as infiltration and the shear strength of soil. In this study, the wettability of a medium to fine sand was chemically modified by using different concentrations of dimethyldichlorosilane (DMDCS). The sessile drop method (SDM) was used for the assessment of wettability of hydrophobised Leighton Buzzard Sand (LBS). The results demonstrate that beyond a concentration of 2 g per kg of LBS, the finer fraction had its apparent contact angle (ACA) increased up to 115° while the maximum ACA attained by the coarser fractions was 100°. At such high concentration of DMDCS, the effect of trapped air, which is known to increase the ACA, was found to be either small or insignificant. The standard deviations of the ACAs agreed well with past studies. The most important factors contributing to the water-repellent behaviour of chemically synthesised sand were attributed to the characteristics of the particles; these include surface area and particle shape.published_or_final_versio

A method for the dynamic correction of B0-related distortions in single-echo EPI at 7 T

We propose a method to calculate field maps from the phase of each EPI in an fMRI time series. These field maps can be used to correct the corresponding magnitude images for distortion caused by inhomogeneity in the static magnetic field. In contrast to conventional static distortion correction, in which one 'snapshot’ field map is applied to all subsequent fMRI time points, our method also captures dynamic changes to B0which arise due to motion and respiration. The approach is based on the assumption that the non-B0-related contribution to the phase measured by each radio-frequency coil, which is dominated by the coil sensitivity, is stable over time and can therefore be removed to yield a field map from EPI. Our solution addresses imaging with multi-channel coils at ultra-high field (7 T), where phase offsets vary rapidly in space, phase processing is non-trivial and distortions are comparatively large. We propose using dual-echo gradient echo reference scan for the phase offset calculation, which yields estimates with high signal-to-noise ratio. An extrapolation method is proposed which yields reliable estimates for phase offsets even where motion is large and a tailored phase unwrapping procedure for EPI is suggested which gives robust results in regions with disconnected tissue or strong signal decay. Phase offsets are shown to be stable during long measurements (40 min) and for large head motions. The dynamic distortion correction proposed here is found to work accurately in the presence of large motion (up to 8.1°), whereas a conventional method based on single field map fails to correct or even introduces distortions (up to 11.2 mm). Finally, we show that dynamic unwarping increases the temporal stability of EPI in the presence of motion. Our approach can be applied to any EPI measurements without the need for sequence modification

Multilayer metamaterial absorbers inspired by perfectly matched layers

We derive periodic multilayer absorbers with effective uniaxial properties similar to perfectly matched layers (PML). This approximate representation of PML is based on the effective medium theory and we call it an effective medium PML (EM-PML). We compare the spatial reflection spectrum of the layered absorbers to that of a PML material and demonstrate that after neglecting gain and magnetic properties, the absorber remains functional. This opens a route to create electromagnetic absorbers for real and not only numerical applications and as an example we introduce a layered absorber for the wavelength of $8$~$\mu$m made of SiO$_2$ and NaCl. We also show that similar cylindrical core-shell nanostructures derived from flat multilayers also exhibit very good absorptive and reflective properties despite the different geometry

Observation of second-harmonic generation induced by pure spin currents

Extensive efforts are currently being devoted to developing a new electronic technology, called spintronics, where the spin of electrons is explored to carry information. [1,2] Several techniques have been developed to generate pure spin currents in many materials and structures. [3-10] However, there is still no method available that can be used to directly detect pure spin currents, which carry no net charge current and no net magnetization. Currently, studies of pure spin currents rely on measuring the induced spin accumulation with optical techniques [5, 11-13] or spin-valve configurations. [14-17] However, the spin accumulation does not directly reflect the spatial distribution or temporal dynamics of the pure spin current, and therefore cannot monitor the pure spin current in a real-time and real-space fashion. This imposes severe constraints on research in this field. Here we demonstrate a second-order nonlinear optical effect of the pure spin current. We show that such a nonlinear optical effect, which has never been explored before, can be used for the non-invasive, non-destructive, and real-time imaging of pure spin currents. Since this detection scheme does not rely on optical resonances, it can be generally applied in a wide range of materials with different electronic bandstructures. Furthermore, the control of nonlinear optical properties of materials with pure spin currents may have potential applications in photonics integrated with spintronics.Comment: 19 pages, 3 figures, supplementary discussion adde