Dissociation of CH₃–O as a Driving Force for Methoxyacetophenone Adsorption on Si(001)

The coverage-dependent behavior of p-methoxyacetophenone on the clean Si(001) surface was followed using X-ray photoelectron spectroscopy and supporting density functional theory calculations. Unlike other multifunctional organic molecules, this compound exhibits a high selectivity of adsorbate species formation by forming only two distinct adsorbate structures at low coverage, with a third configuration forming at high coverages. At low coverage, surface chemisorption is driven by methoxy group dissociation. However, at high coverage, the surface footprint required for this process is no longer available, leading to the formation of less thermodynamically stable adsorbates that are datively bonded to the surface with a smaller footprint. This coverage-dependent but well-defined behavior is promising in designing functional organic–inorganic interfaces on silicon

Atomically precise placement of single dopants in Si

We demonstrate the controlled incorporation of P dopant atoms in Si(001), presenting a new path toward the creation of atomic-scale electronic devices. We present a detailed study of the interaction of PH3 with Si(001) and show that it is possible to thermally incorporate P atoms into Si(001) below the H-desorption temperature. Control over the precise spatial location at which P atoms are incorporated was achieved using STM H lithography. We demonstrate the positioning of single P atoms in Si with similar to1 nm accuracy and the creation of nanometer wide lines of incorporated P atoms

Higher order reconstructions of the Ge(001) surface induced by a Ba layer

Structural properties of Ba-induced reconstructions on a Ge(001) surface, based on atomic-resolution ultra high-vacuum scanning tunneling microscopy measurements, are discussed. It is shown that while the Ba - Ge layer, which fully covers the surface, is dominated by a phase with an internal 2 × 3 periodicity, it also includes portions of higher order 2 × 6 and 4 × 3 surface reconstructions, always accompanied by 1D protrusions embedded into the dominating phase. Modelling the observed higher order structures, using the elementary cell of the 2 × 3 phase calculated within the density functional theory, is shown to reproduce the experimental data very well. As such the higher order reconstructions can be treated as local defects of the dominating 2 × 3 phase

Initial growth of Ba on Ge(001): An STM and DFT study

An ordered alkaline-earth submonolayer on a clean Si(001) surface provides a template for growth of the atomically sharp, crystalline Si-oxide interface that is ubiquitous in the semiconductor device industry. It has been suggested that submonolayers of Sr or Ba on Ge(001) could play a similar role as on structurally identical Si(001), overcoming known limitations of the Ge(001) substrate such as amorphization of its oxidation layers. In this paper the initial stage of the Ba oxidation process, i.e., adsorption and organization of Ba atoms on the Ge(001) surface as a function of temperature (270−770 K) for coverage 1.0 monolayer (ML) and 0.15−0.4 ML, is studied using scanning tunneling microscopy (STM) and density functional theory (DFT). Three types of features have been identified on the Ba-covered Ge(001) surface. They originate from isolated Ba adatoms, isolated Ba ad-dimers, and the Ba ad-dimers assembled into short-range, randomly distributed chains that run across the Ge dimer rows. We find from both STM measurements and DFT calculations that the latter is the dominant structure on Ge(001) with increasing coverage

Adsorption and Dissociation of a Bicyclic Tertiary Diamine, Triethylenediamine, on a Si(100)-2 x 1 Surface

This study investigates the adsorption and thermal transformations of a bicyclic tertiary amine, triethylenediamine, on the clean Si(100)-2 × 1 surface. Below room temperature, triethylenediamine adsorption leads to the formation of a strong dative bond between one of the nitrogen atoms of this compound and the silicon surface. In contrast to previously studied amines, the datively adsorbed triethylenediamine features a second tertiary amine entity that is not bonded to the surface, with a lone pair orbital that is directed away from the surface and is available for further reactions. The thermal chemistry and electronic properties of triethylenediamine on silicon are studied using thermal desorption spectroscopy, infrared spectroscopy, and X-ray photoelectron spectroscopy. Near-edge X-ray absorption fine structure measurements are utilized to clarify the geometry of the adsorbates at room temperature. Density functional theory calculations are used to describe the binding geometry and electronic properties of the resulting surface species and the likely reaction paths at elevated temperatures

STM and DFT study on formation and characterization of Ba-incorporated phases on a Ge(001) surface

We characterize the incorporation of Ba adatoms into the Ge(001) surface, resulting in the formation of one-dimensional structures with an internal 2×3 periodicity, after the deposition of Ba atoms at 970 K or at room temperature followed by a 770 K anneal. Scanning tunneling microscopy (STM) data were compared with theoretically simulated STM images generated by density functional theory electronic structure calculations. Excellent agreement between experiment and simulation was found when using an adopted structural model that assumes partial removal of the surface Ge dimers in the [1–10] surface direction and subsequent addition of a single Ba atom to the substrate second layer. Structural assignments for a number of defects observed within regions of the 2×3 reconstruction were also obtained

The formation of a Sn monolayer on Ge(1 0 0) studied at the atomic scale

The growth of multi-layer germanium-tin (GeSn) quantum wells offers an intriguing pathway towards the integration of lasers in a CMOS platform. An important step in growing high quality quantum well interfaces is the formation of an initial wetting layer. However, key atomic-scale details of this process have not previously been discussed. We use scanning tunneling microscopy combined with density functional theory to study the deposition of Sn on Ge(1 0 0) at room temperature over a coverage range of 0.01 to 1.24 monolayers. We demonstrate the formation of a sub-2% Ge content GeSn wetting layer from three atomic-scale characteristic ad-dimer structural components, and show that small quantities of Sn incorporate into the Ge surface forming two atomic configurations. The ratio of the ad-dimer structures changes with increasing Sn coverage, indicating a change in growth kinetics. At sub-monolayer coverage, the least densely packing ad-dimer structure is most abundant. As the layer closes, forming a two-dimensional wetting layer, the more densely packing ad-dimer structure become dominant. These results demonstrate the capability to form an atomically smooth wetting layer at room temperature, and provide critical atomic-scale insights for the optimization of growth processes of GeSn multi-quantum-wells to meet the quality requirements of optical GeSn-based devices

Quantum engineering at the silicon surface using dangling bonds.

Individual atoms and ions are now routinely manipulated using scanning tunnelling microscopes or electromagnetic traps for the creation and control of artificial quantum states. For applications such as quantum information processing, the ability to introduce multiple atomic-scale defects deterministically in a semiconductor is highly desirable. Here we use a scanning tunnelling microscope to fabricate interacting chains of dangling bond defects on the hydrogen-passivated silicon (001) surface. We image both the ground-state and the excited-state probability distributions of the resulting artificial molecular orbitals, using the scanning tunnelling microscope tip bias and tip-sample separation as gates to control which states contribute to the image. Our results demonstrate that atomically precise quantum states can be fabricated on silicon, and suggest a general model of quantum-state fabrication using other chemically passivated semiconductor surfaces where single-atom depassivation can be achieved using scanning tunnelling microscopy