Recovering Solar Toroidal Field Dynamics From Sunspot Location Patterns

We analyze both Kitt Peak magnetogram data and MDI continuum intensity sunspot data to search for the following solar toroidal band properties: width in latitude and the existence of a tipping instability (longitudinal m=1 mode) for any time during the solar cycle. To determine the extent which we can recover the toroidal field dynamics, we forward model artificially generated sunspot distributions from subsurface toroidal fields we assigned certain properties. We analyzed two sunspot distribution parameters using MDI and model data: the average latitudinal separation of sunspot pairs as a function of longitudinal separation, and the number of sunspot pairs creating a given angle with respect to the E-W direction. A toroidal band of 10 degrees width with a constant tipping of 5 degrees best fits MDI data early in the solar cycle. A toroidal band of 20 degrees width with a tipping amplitude decreasing in time from 5 to 0 degrees best fits MDI data late in the solar cycle. Model data generated by untipped toroidal bands cannot fit MDI high latitude data and can fit only one parameter at low latitudes. Tipped toroidal bands satisfy chi squared criteria at both high and low latitudes. We conclude this is evidence to reject the null hypothesis - that toroidal bands in the solar tachocline do not experience a tipping instability - in favor of the hypothesis that the toroidal band experiences an m=1 tipping instability. Our finding that the band widens from ~10 degrees early in the solar cycle to ~20 degrees late in the solar cycle may be explained in theory by magnetic drag spreading the toroidal band due to altered flow along the tipped field lines.Comment: This paper is accepted to Astrophysical Journal, September 2005 issu

Rocketdyne's advanced coal slurry pumping program

The Rocketdyne Division of Rockwell International Corporation is conducting a program for the engineering, fabrication, and testing of an experimental/prototype high-capacity, high-pressure centrifugal slurry feed pump for coal liquefaction purposes. The abrasion problems in a centrifugal slurry pump are primarily due to the manner in which the hard, solid particles contained in the slurry are transported through the hydraulic flow passages within the pump. The abrasive particles can create scraping, grinding, cutting, and sandblasting effects on the various exposed parts of the pump. These critical areas involving abrasion and impact erosion wear problems in a centrifugal pump are being addressed by Rocketdyne. The mechanisms of abrasion and erosion are being studied through hydrodynamic analysis, materials evaluation, and advanced design concepts

Letter from Winthrop S. Gilman to John Muir, 1903 Mar 20.

March 20, 1903.Address, Box 172John Muir, Esq.,Martinez, Calif.,Dear Sir,I am greatly obliged for your kind reply to my recant query regarding a huge Sequoia, and am interested to learn that you have measured it. My family of five have all been to California several times, and are enthusiasts regarding her wonders in the plant and .scenic world, an immensely enjoyed your letter last evening over tea-cups.Vary Truly Yours[illegible][03188

Precision Measurements of the Semileptonic Charm Decays D0→π−ℓ+νD^0 \to \pi^- \ell^+ \nu and D0→K−ℓ+νD^0 \to K^- \ell^+ \nu

We investigate the decays $D^0\to\pi^-\ell^+\nu$ and $D^0\to K^-\ell^+ \nu$, where $\ell$ is $e$ or $\mu$, using approximately 7 ${\rm fb}^{-1}$ of data collected with the CLEO III detector. We find $R_0\equiv {\cal B}(D^0\to \pi^-e^+\nu)/{\cal B}(D^0\to K^-e^+\nu)= 0.082 \pm 0.006 \pm 0.005$. Fits to the kinematic distributions of the data provide parameters describing the form factor of each mode. Combining the form factor results and $R_0$ gives $|f^{\pi}_{+}(0)|^2 |V_{cd}|^2/|f^K_{+}(0)|^2 |V_{cs}|^2 = 0.038^{+0.006+0.005}_{-0.007-0.003}$.Comment: 5 pages, 2 figures, talk given at DPF'04, UC Riverside, C

The relative fitness of drug-resistant Mycobacterium tuberculosis: a modelling study of household transmission in Peru.

The relative fitness of drug-resistant versus susceptible bacteria in an environment dictates resistance prevalence. Estimates for the relative fitness of resistant Mycobacterium tuberculosis (Mtb) strains are highly heterogeneous and mostly derived from in vitro experiments. Measuring fitness in the field allows us to determine how the environment influences the spread of resistance. We designed a household structured, stochastic mathematical model to estimate the fitness costs associated with multidrug resistance (MDR) carriage in Mtb in Lima, Peru during 2010-2013. By fitting the model to data from a large prospective cohort study of TB disease in household contacts, we estimated the fitness, relative to susceptible strains with a fitness of 1, of MDR-Mtb to be 0.32 (95% credible interval: 0.15-0.62) or 0.38 (0.24-0.61), if only transmission or progression to disease, respectively, was affected. The relative fitness of MDR-Mtb increased to 0.56 (0.42-0.72) when the fitness cost influenced both transmission and progression to disease equally. We found the average relative fitness of MDR-Mtb circulating within households in Lima, Peru during 2010-2013 to be significantly lower than concurrent susceptible Mtb If these fitness levels do not change, then existing TB control programmes are likely to keep MDR-TB prevalence at current levels in Lima, Peru

DNA bending and orientation-dependent function of YY1 in the c-fos promoter

The assembly of multicomponent complexes at promoters, enhancers, and silencers likely entails perturbations in the path of the DNA helix. We present evidence that YY1, a ubiquitously expressed DNA-binding protein, regulates the activity of the c-fos promoter primarily through an effect on DNA structure. YY1 binds to and induces a phased DNA bend at three sites in this promoter. By use of a truncated c-fos promoter activity containing a single functional YY1 site, we show that YY1 represses promoter activity but that repression does not appear to be an intrinsic property of the protein in this context. Moreover, when the orientation of the YY1 site is reversed, YY1 activates the same promoter. Repression by YY1 is also alleviated by changing the relative phasing of factor-binding sites on either side of YY1. We conclude that the principal function of YY1 in this promoter is to bend DNA to regulate contact between other proteins. Thus, YY1 represents a new class of transcription factors that influences promoter function by affecting promoter structure rather than by directly contacting the transcriptional machinery. We provide evidence that the product of the male sex determination gene SRY may also belong to this class of structural factors

Effect of thermal exposure, forming, and welding on high-temperature, dispersion-strengthened aluminum alloy: Al-8Fe-1V-2Si

The feasibility of applying conventional hot forming and welding methods to high temperature aluminum alloy, Al-8Fe-1V-2Si (FVS812), for structural applications and the effect of thermal exposure on mechanical properties were determined. FVS812 (AA8009) sheet exhibited good hot forming and resistance welding characteristics. It was brake formed to 90 deg bends (0.5T bend radius) at temperatures greater than or equal to 390 C (730 F), indicating the feasibility of fabricating basic shapes, such as angles and zees. Hot forming of simple contoured-flanged parts was demonstrated. Resistance spot welds with good static and fatigue strength at room and elevated temperatures were readily produced. Extended vacuum degassing during billet fabrication reduced porosity in fusion and resistance welds. However, electron beam welding was not possible because of extreme degassing during welding, and gas-tungsten-arc welds were not acceptable because of severely degraded mechanical properties. The FVS812 alloy exhibited excellent high temperature strength stability after thermal exposures up to 315 C (600 F) for 1000 h. Extended billet degassing appeared to generally improve tensile ductility, fatigue strength, and notch toughness. But the effects of billet degassing and thermal exposure on properties need to be further clarified. The manufacture of zee-stiffened, riveted, and resistance-spot-welded compression panels was demonstrated