Comparison on decolorization of palm oil mill effluent by biological, chemical and physical methods

Decolorization of palm oil mill effluent pretreated by enzyme from Aspergillus niger ATCC 6275 was investigated. The culture filtrate after separation of suspended solids was used for decolorization by biological, chemical and physical methods. Results indicated that the chemical method (using coagulant) was more effective than the biological method (using commercial peroxidase, two strains of white-rot fungi Phanerochaete chrysosporium and Coriolus versicolor) and physical method (using activated carbon, pararubber seed and sand filter). Studies on the effect of coagulant concentrations on decolorization revealed that using the combination of 10 ml/l polyferric sulphate and 10 g/l calcium oxide gave the highest color removal of 84.5% and organic matter (in term of chemical oxygen demand, COD) removal of 86.5%

The application of fluorescence in situ hybridization (FISH) technique for studying the microbial communities in intestinal tissues of white shrimp (Penaeus vannamei)

Fluorescence in situ hybridization technique is very useful for the evaluation of microbial communities in various environments. It is possible to apply this technique to study the intestinal microflora in white shrimp (Penaeus vannamei). Different fixatives and storage temperature were tested in this technique. It was found that fixation with 10% buffered formalin for 12 hours and changed to 70% ethanol shown positive results when compared to the fixation with Davidson's fixative or RF fixative. The best signaling was obtainedfrom the samples which were stored in -20ºC. By using the DNA probe targeted to the Eubacteria domain (EUB338 probe, 5′-GCT GCC TCC CGT AGG AGT-3′) labeled with fluorescein as a hybridizing probe, it was found that most intestinal microflora were aggregated with the intestinal contents, or dispersed in the lumen. There was not evidence of the attachment of the microflora with the intestinal epithelium in this study

Thermodynamic analysis of methanation of palm empty fruit bunch (PEFB) pyrolysis oil with and without in situ CO2 sorption

Thermodynamic equilibrium analysis for conversion of palm empty fruit bunch (PEFB) bio-oil to methane using low-temperature steam reforming (LTSR) process was conducted by assuming either isothermal or adiabatic condition, with and without sorption enhancement (SE-LTSR), with CaO(S) or Ca(OH)2(S) as CO2 sorbent. Temperatures of 300-800 K, molar steam to carbon (S/C) ratios of 0.3-7.0, pressures of 1-30 atm and molar calcium to carbon ratios (Ca:C) of 0.3-1.0 were simulated. For reasons of process simplicity, the best conditions for CH4 production were observed for the adiabatic LTSR process without sorption at S/C between 2.5 and 3 (compared to the stoichiometric S/C of 0.375), inlet temperature above 450 K, resulting in reformer temperature of 582 K, where close to the theoretical maximum CH4 yield of 38 wt % of the simulated dry PEFB oil was obtained, resulting in a reformate consisting of 44.5 vol % CH4, 42.7 vol % CO2 and 12.7 vol % H2 and requiring only moderate heating mainly to partially preheat the reactants. Temperatures and S/C below these resulted in high risk of carbon by-product

Bio-composting oil palm waste for improvement of soil fertility

Sources of bio-compost as agro-industrial wastes includes wide range of oil palm wastes viz. waste, biomass, palm kernels, empty fruit bunch, mill effluent, trunk and frond compost. Various composting processes are summarized in brief with distinct reference of oil–palm composting covering aerated static pile, and co-composting with earthworms (vermicomposting). However, in-vessel composting and windrow composting has meritorious advantages in composting. This review article refers to various significant roles played by microorganisms associated. Noteworthy study of bio-compost applications and procedures are correspondingly glosses framework of ecological, economical and agro-ecosystemic benefits