Impedimetric Biosensor Based on a Hechtia argentea Lectin for the Detection of Salmonella spp.

A sensitive electrochemical detection method for Salmonella spp. was described, based on the use of Hechtia argentea lectin immobilised on a screen-printed gold electrode. The lectin was extracted from Hechtia argentea, a plant belonging to the Bromeliaceae family. The lectin with molecular weight near 27.4 kDa showed selectivity towards D-mannose, contained on the lipopolysaccharide cell wall of Salmonella spp. Carbohydrate selectivity of the lectin was measured as a change in impedance with respect to concentration. The binding of the bacteria to the biosensor surface increased impedance with increasing concentrations of Salmonella spp., achieving a linear range of detection of 15–2.57 × 107 CFU mL−1, with a limit of detection of 5 CFU mL−1. Increases in impedance were measured using electrochemical impedance spectroscopy and analysed using Nyquist plots. The biosensor was applied in analysis of hen egg samples, and the results were consistent with those obtained using the official analysis methodologyS

Antimicrobial Edible Films and Coatings for Meat and Meat Products Preservation

Animal origin foods are widely distributed and consumed around the world due to their high nutrients availability but may also provide a suitable environment for growth of pathogenic and spoilage microorganisms. Nowadays consumers demand high quality food with an extended shelf life without chemical additives. Edible films and coatings (EFC) added with natural antimicrobials are a promising preservation technology for raw and processed meats because they provide good barrier against spoilage and pathogenic microorganisms. This review gathers updated research reported over the last ten years related to antimicrobial EFC applied to meat and meat products. In addition, the films gas barrier properties contribute to extended shelf life because physicochemical changes, such as color, texture, and moisture, may be significantly minimized. The effectiveness showed by different types of antimicrobial EFC depends on meat source, polymer used, film barrier properties, target microorganism, antimicrobial substance properties, and storage conditions. The perspective of this technology includes tailoring of coating procedures to meet industry requirements and shelf life increase of meat and meat products to ensure quality and safety without changes in sensory characteristics

Diseño estratégico de vanguardia

La integración del diseño con la vanguardia se observa natural, esto es, el diseño es una disciplina abductiva y la vanguardia persigue fines prospectivos, es decir, en ambos casos se trata de objetivos de posibilidad futura. De tal suerte, este libro, emanado de una parte de las ponencias rigurosamente arbitradas del Coloquio Internacional de Diseño 2016, está dividido en tres secciones o capítulos, a saber, el capítulo uno relacionado con la teoría y metodología para proyectos de diseño de vanguardia, el segundo sobre la tecnología, la innovación y la sostenibilidad de vanguardia de dichos proyectos, y finalmente el último capítulo, vinculado con la gestión estratégica de proyectos de vanguardia.La historia se forja de hechos e interpretaciones, de pasados construidos y de presentes en procesos constantes, estudiados en forma estricta por las ciencias. Por su parte, el futuro ostenta la posibilidad de ser indefinidamente planeado con base en las variopintas aproximaciones teóricas y empíricas que dan fundamento a este tipo de ciencia; éstas son denominadas prospectivas y sus bases vanguardias. Resulta importante señalar, que estas posibilidades sólo permiten tener una idea hipotética de lo que será la realidad y el mundo de vida de los seres vivos y su contexto, no obstante, se trata de la única manera racional que tiene el ser humano de prever ese futuro posible. Las distintas ciencias y disciplinas nos permiten construir históricamente estas posibilidades partiendo de datos, hechos, significados y un sinfín de informaciones que le dan cuerpo y sentido a tales posibilidades. En este sentido, la vanguardia, como base del conocimiento prospectivo, observa la necesidad de ser escrita, leída y discutida en los términos más estrictos con el fin de volver las predicciones más precisas. El diseño por su parte, es definido de manera sucinta como la disciplina proyectual estratégica y sistémica de la posibilidad, dirigida a procesos de significación utilitaria y simbólica para la comprensión –o interpretación– y modificación –o proyectación– de niveles de realidad (referentes y sujetos) desde diversos aparatos teóricos y empíricos –perspectivas disciplinarias–

Low-Intensity Pulsed Ultrasound Effect on MIO-M1 Cell Viability: Setup Validation and Standing Waves Analysis

Low-intensity pulsed ultrasound (LIPUS) has been proposed for novel therapies still under study, where similar parameters and protocols have been used for producing opposite effects that range from increasing cell viability to provoking cell death. Those divergent outcomes make the generalization of expected effects difficult for cell models not yet studied. This paper presents the effect of LIPUS on the viability of the MIO-M1 cell line for two well-established setups and different protocols; the acoustic intensities, duty factors, and treatment duration were varied. Measurements and models for acoustic and thermal analysis are included for proposing a solution to improve the reproducibility of this kind of experiments. Results indicate that MIO-M1 viability is less affected for the cells treated through a dish that is partially immersed in water; in these conditions, the cells neither show detrimental nor proliferative effects at intensities lower than 0.4 W/cm2 at 20% duty factor. However, cell viability was reduced when LIPUS was followed by cell subculturing. Treating the cells through a gel, with the culture dish placed on the transducer, increases cell mortality by the production of standing waves and mixed vibration-acoustical effects. Using the water-based setup with a 1° dish inclination reduces the effects of standing waves

Reduction of Salt and Fat in Frankfurter Sausages by Addition of Agaricus bisporus and Pleurotus ostreatus Flour

The reduction of fat and salt and the incorporation of fiber-rich compounds in frankfurters is a trend to improve their nutritional profile. The objective of this study was to evaluate the partial replacement of 30 and 50% of pork backfat and 50% of salt by adding edible mushroom flour (2.5 and 5%) from Agaricus bisporus (Ab) and Pleurotus ostreatus (Po) on physicochemical, microbiological and sensory properties of frankfurters sausages during cold storage. The addition of flours increased the moisture, and the dietary fiber contents in frankfurters, keeping the amino acid profile. Lipid oxidation remained under acceptable values despite not antioxidant effect was observed by mushrooms flours. Only spore-forming bacteria were found during cold storage. Color and texture was modified by addition of mushroom, being the Ab samples darker, while Po flour addition resulted in softer and less cohesive sausages. Although lower color, flavor, and taste scores were given to the mushroom samples than the control, they ranked in the acceptable level confirming that the inclusion of 2.5 and 5% of Ab and Po flours in fat- and salt-reduced frankfurter sausages resulted a feasible strategy to enhance the nutritional profile these products

Development of the CMS detector for the CERN LHC Run 3

International audienceSince the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger

Development of the CMS detector for the CERN LHC Run 3

International audienceSince the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger

Development of the CMS detector for the CERN LHC Run 3

Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger.Since the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger

Development of the CMS detector for the CERN LHC Run 3

International audienceSince the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger

Development of the CMS detector for the CERN LHC Run 3

International audienceSince the initial data taking of the CERN LHC, the CMS experiment has undergone substantial upgrades and improvements. This paper discusses the CMS detector as it is configured for the third data-taking period of the CERN LHC, Run 3, which started in 2022. The entire silicon pixel tracking detector was replaced. A new powering system for the superconducting solenoid was installed. The electronics of the hadron calorimeter was upgraded. All the muon electronic systems were upgraded, and new muon detector stations were added, including a gas electron multiplier detector. The precision proton spectrometer was upgraded. The dedicated luminosity detectors and the beam loss monitor were refurbished. Substantial improvements to the trigger, data acquisition, software, and computing systems were also implemented, including a new hybrid CPU/GPU farm for the high-level trigger