Low cycle fatigue tests of reinforced concrete columns and joints built with ribbed reinforcement and plain stirrups

The majority of existing reinforced concrete (RC) buildings were built prior to the introduction of seismic codes. As observed in various recent earthquakes, due to their lack of structural capacity and ductility such structures are very vulnerable and have suffered considerable damage. The number of cyclic tests that have been carried out to investigate the behaviour of RC components with detailing typical of these buildings is very limited. Such tests are very relevant for seismic vulnerability assessment purposes. In this paper, a low-cycle fatigue testing campaign on RC columns and connections specifically devised to investigate various physical parameters that affect damage development, is presented. The campaign consists of 19 columns and 7 beam-column connections. Some of the preliminary results and observations are presented and discussed

The effect of the number of response cycles on the behaviour of reinforced concrete elements subject to cyclic loading

The development of damage in reinforced concrete (RC) structures is a cumulative process. Some damage indices used to quantify damage make use of the number of response cycles as an Engineering Demand Parameter (EDP) relating with damage development. Other indices make use of deformation in terms of displacement or chord rotation. These functions are generally a function of whether the response is monotonic or cyclic, and are insensitive to the number of major deflection cycles leading to that state of damage. Many such relations are derived from experimental data from low-cycle fatigue tests performed on RC elements. The loading in such tests generally consists of either a monotonic increase in load or a gradually increasing cyclic load. Since damage development is a cumulative process, and hence depends on the load history, the loading pattern in low-cycle fatigue tests for assessment purposes should reflect the response of an earthquake. This paper will discuss a procedure to determine a loading history for cyclic tests, based on earthquake demands. The preliminary results of a campaign of low-cycle fatigue tests on RC elements to investigate the effect of using different load histories are also discussed

3D KINEMATICAL ANALYSIS OF BRAZILIAN FEMALE POLE VAULTERS

Pole Vault is one of the most technical events in track and field. Schade et al. (2005) evaluated kinematical and dynamic variables during the 2005 World Championship in Helsinki providing data of world class vaulters for comparison. Recently, Brazilian pole vaulters have obtained world class results but, despite this, no biomechanical analysis has been conducted with such athletes. Therefore, the aim of this work is the 3D kinematical analysis of the best female athletes during the “XXVII Brazilian Trophy” in 2008

BEA: An efficient Bayesian emulation-based approach for probabilistic seismic response

This paper presents an advanced Bayesian emulation-based approach (hereafter BEA) that allows a reduced number of analyses to be carried out to compute the probabilistic seismic response and fragility of buildings. The BEA, which is a version of kriging, uses a mean function as a first approximation of the expected Engineering Demand Parameter given Intensity Measure (EDP|IM) and then models the approximation errors as a Gaussian Process (GP). A main advantage of the BEA is its flexibility, as it does not impose a fixed mathematical form on the EDP|IM relationship (unlike other approaches such as the standard cloud method). In addition, BEA makes fewer assumptions than standard methods, and provides improved characterization of uncertainty. This paper first presents the BEA approach and then assesses its computational efficiency as compared to the standard cloud method. This is done through the creation of EDP|IM relationships and fragility functions using the outputs of nonlinear dynamic and nonlinear static analyses for two case-study buildings representing Pre- and Special-Code seismic vulnerability classes. The nonlinear dynamic and static analysis methods represent different levels of accuracy i.e., are of high and low fidelity, respectively. The BEA and standard cloud methods are compared in their ability to recreate three “pseudo-realities”, each represented by an artificially generated EDP|IM relationship derived from a large set of analysis runs. Several input configurations are tested, including, reduced sets of training inputs (analysis runs), training inputs of high and low fidelity, two sampling processes for these inputs (i.e., random and stratified sampling) and two different IM representations. The results demonstrate that BEA yields both an improved accuracy in terms of mean estimates, as well as smaller uncertainty bounds compared to the cloud method. The improved performance of the BEA is maintained for all “pseudo-realities” tested regardless of whether it is trained with high or low fidelity analysis data, with the improvement particularly pronounced in cases when the advanced IM INp is used. It is demonstrated that good accuracy can be achieved with BEA even with reduced samples, yielding a saving in 25% in number of analyses required to generate the EDP|IM relationship. Finally, the use of BEA drastically improves both the accuracy and efficiency of the resultant seismic fragility functions

DNA loop statistics and torsional modulus

The modelling of DNA mechanics under external constraints is discussed. Two analytical models are widely known, but disagree for instance on the value of the torsional modulus. The origin of this embarassing situation is located in the concept of writhe. This letter presents a unified model for DNA establishing a relation between the different approaches. I show that the writhe created by the loops of DNA is at the origin of the discrepancy. To take this into account, I propose a new treatment of loop statistics based on numerical simulations using the most general formula for the writhe, and on analytic calculations with only one fit parameter. One can then compute the value of the torsional modulus of DNA without the need of any cut-off.Comment: 8 pages, 1 figure. Accepted by Europhysics Letter

A spatially distributed, physically-based modeling approach for estimating agricultural nitrate leaching to groundwater

Nitrogen-nitrate, while being fundamental for crop production, is of particular concern in the agricultural sector, as it can easily leach to the water table, worsening groundwater quality. Numerical models and Geographic Information System may support the estimation of nitrate leaching rates in space and time, to support sustainable agricultural management practices. In this paper, we present a module for the simulation of the processes involved in the nitrogen cycle in the unsaturated zone, including nitrate leaching. This module was developed taking steps from the ANIMO and EPIC model frameworks and coupled to the hydrological models integrated within the FREEWAT platform. As such, the nitrogen cycle module was then included in the FREEWAT platform. The developed module and the coupling approach were tested using a simple synthetic application, where we simulated nitrate leaching through the unsaturated zone for a sunflower crop irrigated district during a dry year. The results of the simulation allow the estimation of daily nitrate concentration values at the water table. These spatially distributed values may then be further used as input concentration in models for simulating solute transport in aquifers

Extending displacement-based earthquake loss assessment (DBELA) for the computation of fragility curves

This paper presents a new procedure to derive fragility functions for populations of buildings that relies on the displacement-based earthquake loss assessment (DBELA) methodology. In the method proposed herein, thousands of synthetic buildings have been produced considering the probabilistic distribution describing the variability in geometrical and material properties. Then, their nonlinear capacity has been estimated using the DBELA method and their response against a large set of ground motion records has been estimated. Global limit states are used to estimate the distribution of buildings in each damage state for different levels of ground motion, and a regression algorithm is applied to derive fragility functions for each limit state. The proposed methodology is demonstrated for the case of ductile and non-ductile Turkish reinforced concrete frames with masonry infills

Tuberculosis/HIV/AIDS coinfection in Porto Alegre, RS/Brazil - invisibility and silencing of the most affected groups

OBJECTIVE: To analyze how belonging to certain social groups contributes to constituting the vulnerabilities associated with illnesses due to tuberculosis/HIV/AIDS coinfection. METHODOLOGYThis is a qualitative study carried out in the city of Porto Alegre, state of Rio Grande do Sul, in regions of high social vulnerability. Twenty coinfected people were interviewed in specialized health services between August and December 2016. The analysis was based on the frameworks The Sound of Silence and Vulnerability and Human Rights. RESULTS: Socioeconomic conditions were decisive for the constitution of the vulnerability conditions. Processes of people invisibilization, and the silencing of their voices, in a scenario marked by economic, racial and gender inequalities, contributed for their health needs not to be understood and effectively taken into account in the services actions. FINAL CONSIDERATIONS: The more effective strategies are to legitimize voices and to understand the needs of those affected by coinfection, the greater the chances that programmatic responses to the problem will be successful