Recanalization of the Chronically Occluded Internal Carotid Artery: Review of the Literature.

Introduction: We reviewed the literature on interventions for patients with medically refractory chronically occluded internal carotid artery (COICA) to assess the risks and/or benefits after recanalization via an endovascular technique (ET) or hybrid surgery (HS, i.e., ET plus carotid endarterectomy). Methods: A systematic search of the electronic databases was performed. Patients with COICA were classified into 4 different categories according to Hasan et al classification. Results: Eighteen studies satisfied the inclusion criteria. Only 6 studies involved an HS procedure. We identified 389 patients with COICA who underwent ET or HS; 91% were males. The overall perioperative complication rate was 10.1% (95% confidence interval [CI]: 7.4%-13.1%). For types A and B, the successful recanalization rate was 95.4% (95% CI: 86.5%-100%), with a 13.7% (95% CI: 2.3%-27.4%) complication rate. For type C, the success rate for ET was 45.7% (95% CI: 17.8%-70.7%), with a complication rate of 46.0% (95% CI: 20.0%-71.4%) for ET and for the HS technique 87.6% (95% CI: 80.9%-94.4%), with a complication rate of 14.0% (95% CI: 7.0%-21.8%). For type D, the success rate of recanalization was 29.8% (95% CI: 7.8%-52.8%), with a 29.8% (95% CI: 6.1%-56.3%) complication rate. Successful recanalization resulted in a symmetrical perfusion between both cerebral hemispheres, resolution of penumbra, normalization of the mean transit time, and improvement in Montreal Cognitive Assessment (MoCA) score (ΔMoCA = 9.80 points; P = 0.004). Conclusions: Type A and B occlusions benefit from ET, especially in the presence of a large penumbra. Type C occlusions can benefit from HS. Unfortunately, we did not identify an intervention to help patients with type D occlusions. A phase 2b randomized controlled trial is needed to confirm these findings

Comportamiento del gusano rosado de la India Pectinophora gossypiella Saunders en semilla de algodón almacenada.

El presente estudio tuvo como objetivo determinar si el Pectinophora gossypiella puede sobrevivir y multiplicarse en semilla sana de algodón almacenada y conocer el comportamiento del gusano rosado de la india en semilla infestada naturalmente. Se encontró que el gusano no puede multiplicarse en semilla sana de algodón almacenada. En semilla infestada desde el campo las larvas sobreviven pero entran en diapausa, permaneciendo de 73 a 310 días dentro de la semilla, uniendo dos semillas, en cámara algodonosa y sobre la fibra. La diapausa se rompió suministrando humedad altaAlgodón-Gossypium herbaceu

Naturaleza electrónica espín-metálica y propiedades termofísicas del molibdato de cobalto tipo perovskita Ba2CoMoO6

Perovskite-like materials which include magnetic elements have relevance due to the technological perspectives in the spintronics industry. In this work, the magnetic, structural and electronic properties of the Ba2CoMoO6 double perovskite are investigated. Calculations are carried out through the Full-Potential Linear Augmented Plane Wave method within the framework of the Density Functional Theory with exchange and correlation effects in the Generalized Gradient and Local Density approximations, including spin polarization. From the minimization of energy as a function of volume using the Murnaghan’s state equation the equilibrium lattice parameter and cohesive properties of this compound were obtained. The study of the electronic structure was based in the analysis of the electronic density of states, and the band structure, showing that this compound evidences a conductive character for a spin channel and insulation for the other, and presents an integer value for the effective magnetic moment (3.0 μB), which allows it to be classified as a half-metallic material. The effects of pressure and temperature on thermophysical properties such as specific heat, Debye temperature, coefficient of thermal expansion and the Grüneisen parameter were calculated and analyzed from the state equation of the system. The obtained results reveal that, in the low temperature regime, the specific heat at constant volume and pressure presents an analogous behavior to each other, with a tendency to the limit of Dulong-Petit typical of the structures of cubic perovskite type, showing a value of 246.3 J/mol.K at constant volume and slightly higher values at constant pressure. The dependence of the coefficient of thermal expansion, the temperature of Debye and the Grüneisen parameter with the increase in temperature is discussed in relation to other perovskite-like materials.Los materiales de tipo perovskita que incluyen elementos magnéticos tienen relevancia debido a las perspectivas tecnológicas en la industria de la espintrónica. En este trabajo se efectúa un estudio exhaustivo de las propiedades magnéticas, estructurales y electrónicas de la perovskita doble Ba2CoMoO6. Los cálculos se realizan a través del método de ondas planas aumentadas y linealizadas dentro del marco de la teoría del funcional de la densidad con efectos de intercambio y correlación en las aproximaciones del gradiente generalizado y de densidad local, incluyendo polarización de espín. A partir de la minimización de la energía en función del volumen, utilizando la ecuación de estado de Murnaghan, se obtuvieron el parámetro de red de equilibrio y las propiedades cohesivas de este compuesto. El estudio de la estructura electrónica se basó en el análisis de la densidad electrónica de estados y la estructura de bandas, mostrando que este compuesto evidencia un carácter conductor para un canal de espín y aislante para el otro, presentando un valor entero para el momento magnético efectivo (3.0 μB), que permite clasificarlo como un material espín-metálico. Los efectos de la presión y la temperatura sobre las propiedades termofísicas, como el calor específico, la temperatura de Debye, el coeficiente de expansión térmica y el parámetro Grüneisen, se calcularon y analizaron a partir de la ecuación de estado del sistema. Los resultados obtenidos revelan que, en el régimen de baja temperatura, el calor específico a volumen y presión constantes presenta un comportamiento análogo entre sí, con una tendencia al límite de Dulong-Petit típico de las estructuras de tipo perovskita cúbica, mostrando un valor de 246.3 J/mol.K a volumen constante y valores ligeramente más altos a presión constante. La dependencia del coeficiente de expansión térmica, la temperatura de Debye y el parámetro Grüneisen con el aumento de temperatura se discute en relación con otros materiales de tipo perovskita.Fil: Deluque Toro, Crispulo Enrique. Universidad del Magdalena; ColombiaFil: Gil Rebaza, Arles Víctor. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Instituto de Física La Plata. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Instituto de Física La Plata; Argentina. Universidad Nacional de La Plata. Facultad de Ingeniería. Departamento de Electrotecnia. Grupo de Estudio de Materiales y Dispositivos Electrónicos; ArgentinaFil: Villa Hernández, Jorge I.. Universidad Nacional de Colombia; ColombiaFil: Landinez Téllez, David A.. Universidad Nacional de Colombia; ColombiaFil: Roa Rojas, Jairo. Universidad Nacional de Colombia; Colombi

Naturaleza electrónica espín-metálica y propiedades termofísicas del molibdato de cobalto tipo perovskita Ba₂CoMoO₆

Perovskite-like materials which include magnetic elements have relevance due to the technological perspectives in the spintronics industry. In this work, the magnetic, structural and electronic properties of the Ba₂CoMoO₆ double perovskite are investigated. Calculations are carried out through the Full-Potential Linear Augmented Plane Wave method within the framework of the Density Functional Theory with exchange and correlation effects in the Generalized Gradient and Local Density approximations, including spin polarization. From the minimization of energy as a function of volume using Murnaghan’s state equation the equilibrium lattice parameter and cohesive properties of this compound were obtained. The study of the electronic structure was based in the analysis of the electronic density of states, and the band structure, showing that this compound evidences a conductive character for a spin channel and insulation for the other, and presents an integer value for the effective magnetic moment (3.0 μB), which allows it to be classified as a half-metallic material. The effects of pressure and temperature on thermophysical properties such as specific heat, Debye temperature, coefficient of thermal expansion and the Grüneisen parameter were calculated and analyzed from the state equation of the system. Obtained results reveal that, in the low-temperature regime, the specific heat at constant volume and pressure presents an analogous behavior to each other, with a tendency to the limit of Dulong-Petit typical of the structures of cubic perovskite-type, showing a value of 246.3 J/mol.K at constant volume and slightly higher values at constant pressure. The dependence of the thermal expansion coefficient, the temperature of Debye and the Grüneisen parameter with the increase in temperature are discussed in relation to other perovskite-like materials.Los materiales de tipo perovskita que incluyen elementos magnéticos tienen relevancia debido a las perspectivas tecnológicas en la industria de la espintrónica. En este trabajo se efectúa un estudio exhaustivo de las propiedades magnéticas, estructurales y electrónicas de la perovskita doble Ba₂CoMoO₆. Los cálculos se realizan a través del método de ondas planas aumentadas y linealizadas dentro del marco de la teoría del funcional de la densidad con efectos de intercambio y correlación en las aproximaciones del gradiente generalizado y de densidad local, incluyendo polarización de espín. A partir de la minimización de la energía en función del volumen, utilizando la ecuación de estado de Murnaghan, se obtuvieron el parámetro de red de equilibrio y las propiedades cohesivas de este compuesto. El estudio de la estructura electrónica se basó en el análisis de la densidad electrónica de estados y la estructura de bandas, mostrando que este compuesto evidencia un carácter conductor para un canal de espín y aislante para el otro, presentando un valor entero para el momento magnético efectivo (3.0 μB), que permite clasificarlo como un material espín-metálico. Los efectos de la presión y la temperatura sobre las propiedades termofísicas, como el calor específico, la temperatura de Debye, el coeficiente de expansión térmica y el parámetro Grüneisen, se calcularon y analizaron a partir de la ecuación de estado del sistema. Los resultados obtenidos revelan que, en el régimen de baja temperatura, el calor específico a volumen y presión constantes presenta un comportamiento análogo entre sí, con una tendencia al límite de Dulong-Petit típico de las estructuras de tipo perovskita cúbica, mostrando un valor de 246.3 J/mol.K a volumen constante y valores ligeramente más altos a presión constante. La dependencia del coeficiente de expansión térmica, la temperatura de Debye y el parámetro Grüneisen con el aumento de temperatura se discute en relación con otros materiales de tipo perovskita.Instituto de Física La PlataGrupo de Estudio de Materiales y Dispositivos Electrónico

Inhibition of Gsk3b Reduces Nfkb1 Signaling and Rescues Synaptic Activity to Improve the Rett Syndrome Phenotype in Mecp2-Knockout Mice

Rett syndrome (RTT) is the second leading cause of mental impairment in girls and is currently untreatable. RTT is caused, in more than 95% of cases, by loss-of-function mutations in the methyl CpG- binding protein 2 gene (MeCP2). We propose here a molecular target involved in RTT: the glycogen synthase kinase-3b (Gsk3b) pathway. Gsk3b activity is deregulated in Mecp2-knockout (KO) mice models, and SB216763, a specific inhibitor, is able to alleviate the clinical symptoms with consequences at the molecular and cellular levels. In vivo, inhibition of Gsk3b prolongs the lifespan of Mecp2-KO mice and reduces motor deficits. At the molecular level, SB216763 rescues dendritic networks and spine density, while inducing changes in the properties of excitatory synapses. Gsk3b inhibition can also decrease the nuclear activity of the Nfkb1 pathway and neuroinflammation. Altogether, our findings indicate that Mecp2 deficiency in the RTT mouse model is partially rescued following treatment with SB216763

Hunt for new phenomena using large jet multiplicities and missing transverse momentum with ATLAS in 4.7 fb−1 of s√=7TeV proton-proton collisions

Results are presented of a search for new particles decaying to large numbers of jets in association with missing transverse momentum, using 4.7 fb−1 of pp collision data at s√=7TeV collected by the ATLAS experiment at the Large Hadron Collider in 2011. The event selection requires missing transverse momentum, no isolated electrons or muons, and from ≥6 to ≥9 jets. No evidence is found for physics beyond the Standard Model. The results are interpreted in the context of a MSUGRA/CMSSM supersymmetric model, where, for large universal scalar mass m 0, gluino masses smaller than 840 GeV are excluded at the 95% confidence level, extending previously published limits. Within a simplified model containing only a gluino octet and a neutralino, gluino masses smaller than 870 GeV are similarly excluded for neutralino masses below 100 GeV

Measurements of Higgs boson production and couplings in diboson final states with the ATLAS detector at the LHC

Measurements are presented of production properties and couplings of the recently discovered Higgs boson using the decays into boson pairs, H →γ γ, H → Z Z∗ →4l and H →W W∗ →lνlν. The results are based on the complete pp collision data sample recorded by the ATLAS experiment at the CERN Large Hadron Collider at centre-of-mass energies of √s = 7 TeV and √s = 8 TeV, corresponding to an integrated luminosity of about 25 fb−1. Evidence for Higgs boson production through vector-boson fusion is reported. Results of combined fits probing Higgs boson couplings to fermions and bosons, as well as anomalous contributions to loop-induced production and decay modes, are presented. All measurements are consistent with expectations for the Standard Model Higgs boson

Standalone vertex finding in the ATLAS muon spectrometer

A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011

Measurement of the top quark-pair production cross section with ATLAS in pp collisions at \sqrt{s}=7\TeV

A measurement of the production cross-section for top quark pairs(\ttbar) in $pp$ collisions at \sqrt{s}=7 \TeV is presented using data recorded with the ATLAS detector at the Large Hadron Collider. Events are selected in two different topologies: single lepton (electron $e$ or muon $\mu$) with large missing transverse energy and at least four jets, and dilepton ($ee$, $\mu\mu$ or $e\mu$) with large missing transverse energy and at least two jets. In a data sample of 2.9 pb-1, 37 candidate events are observed in the single-lepton topology and 9 events in the dilepton topology. The corresponding expected backgrounds from non-\ttbar Standard Model processes are estimated using data-driven methods and determined to be $12.2 \pm 3.9$ events and $2.5 \pm 0.6$ events, respectively. The kinematic properties of the selected events are consistent with SM \ttbar production. The inclusive top quark pair production cross-section is measured to be \sigmattbar=145 \pm 31 ^{+42}_{-27} pb where the first uncertainty is statistical and the second systematic. The measurement agrees with perturbative QCD calculations.Comment: 30 pages plus author list (50 pages total), 9 figures, 11 tables, CERN-PH number and final journal adde