Urban deciduous tree leaves as biomonitors of trace element (As, V and Cd) atmospheric pollution in Belgrade, Serbia

Leaves of common deciduous trees: horse chestnut (Aesculus hippocastanum) and linden (Tilia spp.) from three parks within the urban area of Belgrade were studied as biomonitors of trace element (As, V, and Cd) atmospheric pollution. The May–September trace element accumulation in the leaves, and their temporal trends, were assayed in a multi-year period (2002–2006). Significant accumulation in the leaves was evident for As and V, but not so regularly for Cd. Slightly decreasing temporal trends of V and As ac-cumulated in the leaf tissues were observed over the years. During the time span, the concentrations of Cd remained approximately on the same level, except in May 2002 and September 2005, when a rapid increase was observed. The May–September accumulations of As and V were higher in horse chestnut than in linden, although both may be used as biomonitors for these elements, and optionally for Cd in conditions of its high atmospheric loadings

Characterization of Roman mortar from the Mediana archeological site

Ovaj rad prikazuje istraživanje rimske žbuke rabljene za konstrukciju poda u objektima koji su imali sustav podnog grijanja – hipokaust, u rezidencijalnim vilama s peristelom (Naisus, Srbija). Ispitano je i analizirano ukupno sedam uzoraka žbuke s različitih lokacija vile s ciljem dobivanja informacija o njezinim morfološkim, mineraloškim, kemijskim i osnovnim fizikalnim karakteristikama. Za utvrđivanje ovih svojstava rabljena je: optička mikroskopija, skenirajući elektronski mikroskop (SEM), s EDS analizom, difrakcijska analiza s X-zrakama (XRD). Žbuka ima prilično ujednačene karakteristike preko cijele površine poda hipokausta. Žbuka dominantno čini karbonatno vezivo i agregat veličine zrna od 0,05 do 2 mm s rijetkom pojavom zrna dimenzija 10 mm. Kao agregat za žbuku rabljeni su dijelovi žbuke, zrna krečnjaka, kvarc, metamorfiti i vulkaniti. Uporaba drobljene opeke i prisustvo reakcijskog ruba, potvrđuje njezinu funkciju hidrauličnog vezivanja. Slaba veza između zrna agregata i krečnjačkog veziva omogućava transport vode kroz formiranu tranzitnu zonu.This paper presents the study of the Roman mortar used for construction of floors in the buildings which possessed floor heating system – hypocaust, in the residential villa with the peristyle (Naisus, Serbia). A total of seven samples of mortar from different locations of the villa were examined and analyzed for information about its morphological, mineralogical, chemical and basic physical properties. In order to determine these properties were used: optical microscopy, the scanning electron microscopy (SEM) with EDS analysis, X-ray diffraction analysis (XRD). The mortar is dominantly made of carbonate binder and the aggregate of grain size 0,05 to 2 mm with a rare occurrence of 10 mm grains. Fragments of mortar, grains of limestone, quartz, metarmorphite and vulcanite were used for the mortar aggregate. Usage of crushed brick and reaction rim confirms its function of hydraulic binder. The weak bonds between the aggregate grains and limestone binder facilitate transport of water through the formed transit zones

Critical aspects of substrate nanopatterning for the ordered growth of GaN nanocolumns

Precise and reproducible surface nanopatterning is the key for a successful ordered growth of GaN nanocolumns. In this work, we point out the main technological issues related to the patterning process, mainly surface roughness and cleaning, and mask adhesion to the substrate. We found that each of these factors, process-related, has a dramatic impact on the subsequent selective growth of the columns inside the patterned holes. We compare the performance of e-beam lithography, colloidal lithography, and focused ion beam in the fabrication of hole-patterned masks for ordered columnar growth. These results are applicable to the ordered growth of nanocolumns of different materials

Measurement of the cross-section and charge asymmetry of WW bosons produced in proton-proton collisions at s=8\sqrt{s}=8 TeV with the ATLAS detector

This paper presents measurements of the $W^+ \rightarrow \mu^+\nu$ and $W^- \rightarrow \mu^-\nu$ cross-sections and the associated charge asymmetry as a function of the absolute pseudorapidity of the decay muon. The data were collected in proton--proton collisions at a centre-of-mass energy of 8 TeV with the ATLAS experiment at the LHC and correspond to a total integrated luminosity of 20.2~\mbox{fb^{-1}}. The precision of the cross-section measurements varies between 0.8% to 1.5% as a function of the pseudorapidity, excluding the 1.9% uncertainty on the integrated luminosity. The charge asymmetry is measured with an uncertainty between 0.002 and 0.003. The results are compared with predictions based on next-to-next-to-leading-order calculations with various parton distribution functions and have the sensitivity to discriminate between them.Comment: 38 pages in total, author list starting page 22, 5 figures, 4 tables, submitted to EPJC. All figures including auxiliary figures are available at https://atlas.web.cern.ch/Atlas/GROUPS/PHYSICS/PAPERS/STDM-2017-13

Manufacture Techniques of Chitosan-Based Microcapsules to Enhance Functional Properties of Textiles

In recent years, the textile industry has been moving to novel concepts of products, which could deliver to the user, improved performances. Such smart textiles have been proven to have the potential to integrate within a commodity garment advanced feature and functional properties of different kinds. Among those functionalities, considerable interest has been played in functionalizing commodity garments in order to make them positively interact with the human body and therefore being beneficial to the user health. This kind of functionalization generally exploits biopolymers, a class of materials that possess peculiar properties such as biocompatibility and biodegradability that make them suitable for bio-functional textile production. In the context of biopolymer chitosan has been proved to be an excellent potential candidate for this kind of application given its abundant availability and its chemical properties that it positively interacts with biological tissue. Notwithstanding the high potential of chitosan-based technologies in the textile sectors, several issues limit the large-scale production of such innovative garments. In facts the morphologies of chitosan structures should be optimized in order to make them better exploit the biological activity; moreover a suitable process for the application of chitosan structures to the textile must be designed. The application process should indeed not only allow an effective and durable fixation of chitosan to textile but also comply with environmental rules concerning pollution emission and utilization of harmful substances. This chapter reviews the use of microencapsulation technique as an approach to effectively apply chitosan to the textile material while overcoming the significant limitations of finishing processes. The assembly of chitosan macromolecules into microcapsules was proved to boost the biological properties of the polymer thanks to a considerable increase in the surface area available for interactions with the living tissues. Moreover, the incorporation of different active substances into chitosan shells allows the design of multifunctional materials that effectively combine core and shell properties. Based on the kind of substances to be incorporated, several encapsulation processes have been developed. The literature evidences how the proper choices concerning encapsulation technology, chemical formulations, and process parameter allow tuning the properties and the performances of the obtained microcapsules. Furthermore, the microcapsules based finishing process have been reviewed evidencing how the microcapsules morphology can positively interact with textile substrate allowing an improvement in the durability of the treatment. The application of the chitosan shelled microcapsules was proved to be capable of imparting different functionalities to textile substrates opening possibilities for a new generation of garments with improved performances and with the potential of protecting the user from multiple harms. Lastly, a continuous interest was observed in improving the process and formulation design in order to avoid the usage of toxic substances, therefore, complying with an environmentally friendly approach

Measurements of inclusive and differential fiducial cross-sections of tt production with additional heavy-flavour jets in proton-proton collisions at √ s= 13 TeV with the ATLAS detector

This paper presents measurements of tt production in association with additional b-jets in pp collisions at the LHC at a centre-of-mass energy of 13 TeV. The data were recorded with the ATLAS detector and correspond to an integrated luminosity of 36.1 fb−1. Fiducial cross-section measurements are performed in the dilepton and lepton-plus-jets tt decay channels. Results are presented at particle level in the form of inclusive cross-sections of tt final states with three and four b-jets as well as differential cross-sections as a function of global event properties and properties of b-jet pairs. The measured inclusive fiducial cross-sections generally exceed the ttbb predictions from various next-to-leading-order matrix element calculations matched to a parton shower but are compatible within the total uncertainties. The experimental uncertainties are smaller than the uncertainties in the predictions. Comparisons of state-of-the-art theoretical predictions with the differential measurements are shown and good agreement with data is found for most of them

Search for a new resonance decaying to a W or Z boson and a Higgs boson in the ll/lv/vv + bb final states with the ATLAS detector

A search for a new resonance decaying to a W or Z boson and a Higgs boson in the ll/lv/vv + bb final states is performed using 20.3 fb −1 of pp collision data recorded at √ s = 8 TeV with the ATLAS detector at the Large Hadron Collider. The search is conducted by examining the W H / Z H invariant mass distribution for a localized excess. No significant deviation from the Standard Model background prediction is observed. The results are interpreted in terms of constraints on the Minimal Walking Technicolor model and on a simplified approach based on a phenomenological Lagrangian of Heavy Vector Triplets

Search for heavy particles decaying into a top-quark pair in the fully hadronic final state in pp collisions at √s=13 TeV with the ATLAS detector

A search for new particles decaying into a pair of top quarks is performed using proton-proton collision data recorded with the ATLAS detector at the Large Hadron Collider at a center-of-mass energy of √s=13  TeV corresponding to an integrated luminosity of 36.1  fb−1. Events consistent with top-quark pair production and the fully hadronic decay mode of the top quarks are selected by requiring multiple high transverse momentum jets including those containing b-hadrons. Two analysis techniques, exploiting dedicated top-quark pair reconstruction in different kinematic regimes, are used to optimize the search sensitivity to new hypothetical particles over a wide mass range. The invariant mass distribution of the two reconstructed top-quark candidates is examined for resonant production of new particles with various spins and decay widths. No significant deviation from the Standard Model prediction is observed and limits are set on the production cross-section times branching fraction for new hypothetical Z′ bosons, dark-matter mediators, Kaluza-Klein gravitons and Kaluza-Klein gluons. By comparing with the predicted production cross sections, the Z′ boson in the topcolor-assisted-technicolor model is excluded for masses up to 3.1–3.6 TeV, the dark-matter mediators in a simplified framework are excluded in the mass ranges from 0.8 to 0.9 TeV and from 2.0 to 2.2 TeV, and the Kaluza-Klein gluon is excluded for masses up to 3.4 TeV, depending on the decay widths of the particles