37 research outputs found
Recommended from our members
Projecting global mean sea-level change using CMIP6 models
The effective climate sensitivity (EffCS) of models in the Coupled Model Intercomparison Project 6 (CMIP6) has increased relative to CMIP5. We explore the implications of this for global mean sea‐level (GMSL) change projections in 2100 for three emissions scenarios. CMIP6 projections of global surface air temperature are substantially higher than in CMIP5, but projections of global mean thermal expansion are not. Using these projections as input to construct projections of GMSL change with IPCC AR5 methods, the 95th percentile of GMSL change at 2100 only increases by 3‐7 cm. Projected rates of GMSL rise around 2100 increase more strongly, though, implying more pronounced differences beyond 2100 and greater committed sea‐level rise. Inter‐model differences in GMSL projections indicate that EffCS‐based model selection may substantially alter the ensemble projections. GMSL change in 2100 is accurately predicted by time‐integrated temperature change, and thus requires reducing emissions early to be mitigated
Forcings, feedbacks and climate sensitivity in HadGEM3‐GC3.1 and UKESM1
Climate forcing, sensitivity and feedback metrics are evaluated in both the UK’s physical climate model HadGEM3-GC3.1at low (-LL) and medium(-MM) resolution and the UK’s Earth System Model UKESM1. The Effective Climate Sensitivity (EffCS)to a doubling of CO2 is 5.5K for HadGEM3.1-GC3.1-LL and 5.4 K for UKESM1. The transient climate response is 2.5K and 2.8K respectively. Whilst the EffCS is larger than that seen in the previous generation of models, none of the model’s forcing or feedback processes are found to be atypical of models, though the cloud feedback is at the high end. The relatively large EffCS results from an unusual combination of a typical CO2 forcing with a relatively small feedback parameter. Compared to the previous UK climate model, HadGEM3-GC2.0, the EffCS has increased from 3.2K to 5.5K due to an increase in CO2 forcing, surface albedo feedback and mid-latitude cloud feedback. All changes are well understood and due to physical improvements in the model.At higher atmospheric and ocean resolution(HadGEM3-GC3.1-MM), there is a compensation between increased marine stratocumulous cloud feedback and reduced Antarctic sea-ice feedback. In UKESM1 a CO2 fertilization effect induces a land surface vegetation change and albedo radiative effect. Historical aerosol forcing in HadGEM3-GC3.1-LL is -1.1 Wm-2. In HadGEM3-GC3.1-LL historical simulations cloud feedback is found to be less positive than in abrupt-4xCO2, in agreement with atmosphere-only experiments forced with observed historical sea-surface-temperature and sea-ice variations. However variability in the coupled model’s historical sea-ice trends hampers accurate diagnosis of the model’s total historical feedback
Recommended from our members
Historical simulations with HadGEM3-GC3.1 for CMIP6
We describe and evaluate historical simulations which use the third Hadley Centre Global Environment Model in the Global Coupled configuration 3.1 (HadGEM3-GC3.1) model and which form part of the UK's contribution to the sixth Coupled Model Intercomparison Project, CMIP6. These simulations, run at two resolutions, respond to historically evolving forcings such as greenhouse gases, aerosols, solar irradiance, volcanic aerosols, land use, and ozone concentrations. We assess the response of the simulations to these historical forcings and compare against the observational record. This includes the evolution of global mean surface temperature, ocean heat content, sea ice extent, ice sheet mass balance, permafrost extent, snow cover, North Atlantic sea surface temperature and circulation, and decadal precipitation. We find that the simulated time evolution of global mean surface temperature broadly follows the observed record but with important quantitative differences which we find are most likely attributable to strong effective radiative forcing from anthropogenic aerosols and a weak pattern of sea surface temperature response in the low to middle latitudes to volcanic eruptions. We also find evidence that anthropogenic aerosol forcings play a role in driving the Atlantic Multidecadal Variability and the Atlantic Meridional Overturning Circulation, which are key features of the North Atlantic ocean. Overall, the model historical simulations show many features in common with the observed record over the period 1850–2014 and so provide a basis for future in-depth study of recent climate change
Prognosis for patients with amyotrophic lateral sclerosis: development and validation of a personalised prediction model
Summary
Background
Amyotrophic lateral sclerosis (ALS) is a relentlessly progressive, fatal motor neuron disease with a variable natural history. There are no accurate models that predict the disease course and outcomes, which complicates risk assessment and counselling for individual patients, stratification of patients for trials, and timing of interventions. We therefore aimed to develop and validate a model for predicting a composite survival endpoint for individual patients with ALS.
Methods
We obtained data for patients from 14 specialised ALS centres (each one designated as a cohort) in Belgium, France, the Netherlands, Germany, Ireland, Italy, Portugal, Switzerland, and the UK. All patients were diagnosed in the centres after excluding other diagnoses and classified according to revised El Escorial criteria. We assessed 16 patient characteristics as potential predictors of a composite survival outcome (time between onset of symptoms and non-invasive ventilation for more than 23 h per day, tracheostomy, or death) and applied backward elimination with bootstrapping in the largest population-based dataset for predictor selection. Data were gathered on the day of diagnosis or as soon as possible thereafter. Predictors that were selected in more than 70% of the bootstrap resamples were used to develop a multivariable Royston-Parmar model for predicting the composite survival outcome in individual patients. We assessed the generalisability of the model by estimating heterogeneity of predictive accuracy across external populations (ie, populations not used to develop the model) using internal–external cross-validation, and quantified the discrimination using the concordance (c) statistic (area under the receiver operator characteristic curve) and calibration using a calibration slope.
Findings
Data were collected between Jan 1, 1992, and Sept 22, 2016 (the largest data-set included data from 1936 patients). The median follow-up time was 97·5 months (IQR 52·9–168·5). Eight candidate predictors entered the prediction model: bulbar versus non-bulbar onset (univariable hazard ratio [HR] 1·71, 95% CI 1·63–1·79), age at onset (1·03, 1·03–1·03), definite versus probable or possible ALS (1·47, 1·39–1·55), diagnostic delay (0·52, 0·51–0·53), forced vital capacity (HR 0·99, 0·99–0·99), progression rate (6·33, 5·92–6·76), frontotemporal dementia (1·34, 1·20–1·50), and presence of a C9orf72 repeat expansion (1·45, 1·31–1·61), all p<0·0001. The c statistic for external predictive accuracy of the model was 0·78 (95% CI 0·77–0·80; 95% prediction interval [PI] 0·74–0·82) and the calibration slope was 1·01 (95% CI 0·95–1·07; 95% PI 0·83–1·18). The model was used to define five groups with distinct median predicted (SE) and observed (SE) times in months from symptom onset to the composite survival outcome: very short 17·7 (0·20), 16·5 (0·23); short 25·3 (0·06), 25·2 (0·35); intermediate 32·2 (0·09), 32·8 (0·46); long 43·7 (0·21), 44·6 (0·74); and very long 91·0 (1·84), 85·6 (1·96).
Interpretation
We have developed an externally validated model to predict survival without tracheostomy and non-invasive ventilation for more than 23 h per day in European patients with ALS. This model could be applied to individualised patient management, counselling, and future trial design, but to maximise the benefit and prevent harm it is intended to be used by medical doctors only.
Funding
Netherlands ALS Foundation
Recommended from our members
Toward seamless prediction: calibration of climate change projections using seasonal forecasts
The CWRF is developed as a climate extension of the Weather Research and Forecasting model (WRF) by incorporating numerous improvements in the representation of physical processes and integration of external (top, surface, lateral) forcings that are crucial to climate scales, including interactions between land, atmosphere, and ocean; convection and microphysics; and cloud, aerosol, and radiation; and system consistency throughout all process modules. This extension inherits all WRF functionalities for numerical weather prediction while enhancing the capability for climate modeling. As such, CWRF can be applied seamlessly to weather forecast and climate prediction. The CWRF is built with a comprehensive ensemble of alternative parameterization schemes for each of the key physical processes, including surface (land, ocean), planetary boundary layer, cumulus (deep, shallow), microphysics, cloud, aerosol, and radiation, and their interactions. This facilitates the use of an optimized physics ensemble approach to improve weather or climate prediction along with a reliable uncertainty estimate. The CWRF also emphasizes the societal service capability to provide impactrelevant information by coupling with detailed models of terrestrial hydrology, coastal ocean, crop growth, air quality, and a recently expanded interactive water quality and ecosystem model.
This study provides a general CWRF description and basic skill evaluation based on a continuous integration for the period 1979– 2009 as compared with that of WRF, using a 30-km grid spacing over a domain that includes the contiguous United States plus southern Canada and northern Mexico. In addition to advantages of greater application capability, CWRF improves performance in radiation and terrestrial hydrology over WRF and other regional models. Precipitation simulation, however, remains a challenge for all of the tested models