55 research outputs found
Crystallizing the function of the magnetosome membrane mineralization protein Mms6
The literature on the magnetosome membrane (MM) protein, magnetosome membrane specific6 (Mms6),
is reviewed. Mms6 is native to magnetotactic bacteria (MTB). These bacteria take up iron from solution and
biomineralize magnetite nanoparticles within organelles called magnetosomes. Mms6 is a small protein
embedded on the interior of the MM and was discovered tightly associated with the formed mineral. It has
been the subject of intensive research as it is seen to control the formation of particles both in vivo and
in vitro. Here, we compile, review and discuss the research detailing Mms6’s activity within the cell and in a
range of chemical in vitro methods where Mms6 has a marked effect on the composition, size and distribution
of synthetic particles, with approximately 21 nm in size for solution precipitations and approximately 90 nm
for those formed on surfaces. Furthermore, we review and discuss recent work detailing the structure and
function of Mms6. From the evidence, we propose a mechanism for its function as a specific magnetite
nucleation protein and summaries the key features for this action: namely, self-assembly to display a
charged surface for specific iron binding, with the curvature of the surfaces determining the particle size.
We suggest these may aid design of biomimetic additives for future green nanoparticle production
Targeted magnetic nanoparticle hyperthermia for the treatment of oral cancer
INTRODUCTION: Patients with oral squamous cell carcinoma currently experience a five year survival rate of approximately 60% with conventional surgical, chemotherapy and radiotherapy treatments. Magnetic hyperthermia offers an alternative treatment method by utilising the heating properties of magnetic nanoparticles to produce thermo-ablation of the tumour site when exposed to an alternating magnetic field. In this study we investigate in vitro if targeted magnetic hyperthermia offers a potential treatment for oral squamous cell carcinoma.
MATERIALS AND METHODS: Magnetic iron oxide nanoparticles, with a biocompatible silica coating, were produced and conjugated with antibodies to target integrin αvβ6, a well-characterised oral squamous cell carcinoma biomarker. Utilising the heating properties of the magnetic nanoparticles we exposed them to an alternating magnetic field to produce thermo-ablation of tumour cells either negative for or over-expressing integrin αvβ6.
RESULTS: The cell surface biomarker, αvβ6 integrin, was upregulated in tissue biopsies from oral squamous cell carcinoma patients compared to normal tissue. Functionalisation of the silica coating with anti-αvβ6 antibodies enabled direct targeting of the nanoparticles to αvβ6-overexpressing cells and applying thermal therapy significantly increased killing of the targeted tumour cells compared to control cells.
CONCLUSION: Combining antibody-targeting magnetic nanoparticles with thermal-ablation offers a promising therapy for the targeted treatment of oral squamous cell carcinoma
Investigating the ferric ion binding site of magnetite biomineralisation protein Mms6
The biomineralization protein Mms6 has been shown to be a major player in the formation of magnetic nanoparticles both within the magnetosomes of magnetotactic bacteria and as an additive in synthetic magnetite precipitation assays. Previous studies have highlighted the ferric iron binding capability of the protein and this activity is thought to be crucial to its mineralizing properties. To understand how this protein binds ferric ions we have prepared a series of single amino acid substitutions within the C-terminal binding region of Mms6 and have used a ferric binding assay to probe the binding site at the level of individual residues which has pinpointed the key residues of E44, E50 and R55 involved in Mms6 ferric binding. No aspartic residues bound ferric ions. A nanoplasmonic sensing experiment was used to investigate the unstable EER44, 50,55AAA triple mutant in comparison to native Mms6. This suggests a difference in interaction with iron ions between the two and potential changes to the surface precipitation of iron oxide when the pH is increased. All-atom simulations suggest that disruptive mutations do not fundamentally alter the conformational preferences of the ferric binding region. Instead, disruption of these residues appears to impede a sequence-specific motif in the C-terminus critical to ferric ion binding
Identification of the active site of legumain links it to caspases, clostripain and gingipains in a new clan of cysteine endopeptidases
AbstractWe show by site-directed mutagenesis that the catalytic residues of mammalian legumain, a recently discovered lysosomal asparaginycysteine endopeptidase, form a catalytic dyad in the motif His-Gly-spacer-Ala-Cys. We note that the same motif is present in the caspases, aspartate-specific endopeptidases central to the process of apoptosis in animal cells, and also in the families of clostripain and gingipain which are arginyl/lysyl endopeptidases of pathogenic bacteria. We propose that the four families have similar protein folds, are evolutionarily related in clan CD, and have common characteristics including substrate specificities dominated by the interactions of the S1 subsite
Macrofluidic coaxial flow platforms to produce tunable magnetite nanoparticles : a study of the effect of reaction conditions and biomineralisation protein Mms6
Magnetite nanoparticles’ applicability is growing extensively. However, simple, environmentally-friendly, tunable synthesis of monodispersed iron-oxide nanoparticles is challenging. Continuous flow microfluidic synthesis is promising; however, the microscale results in small yields and clogging. Here we present two simple macrofluidics devices (cast and machined) for precision magnetite nanoparticle synthesis utilizing formation at the interface by diffusion between two laminar flows, removing aforementioned issues. Ferric to total iron was varied between 0.2 (20:80 Fe3+:Fe2+) and 0.7 (70:30 Fe3+:Fe2+). X-ray diffraction shows magnetite in fractions from 0.2–0.6, with iron-oxide impurities in 0.7, 0.2 and 0.3 samples and magnetic susceptibility increases with increasing ferric content to 0.6, in agreement with each other and batch synthesis. Remarkably, size is tuned (between 20.5 nm to 6.5 nm) simply by increasing ferric ions ratio. Previous research shows biomineralisation protein Mms6 directs magnetite synthesis and controls size, but until now has not been attempted in flow. Here we report Mms6 increases magnetism, but no difference in particle size is seen, showing flow reduced the influence of Mms6. The study demonstrates a versatile yet simple platform for the synthesis of a vast range of tunable nanoparticles and ideal to study reaction intermediates and additive effects throughout synthesis
Expression of soluble, active fragments of the morphogenetic protein SpoIIE from Bacillus subtilis using a library-based construct screen
SpoIIE is a dual function protein that plays important roles during sporulation in Bacillus subtilis. It binds to the tubulin-like protein FtsZ causing the cell division septum to relocate from mid-cell to the cell pole, and it dephosphorylates SpoIIAA phosphate leading to establishment of differential gene expression in the two compartments following the asymmetric septation. Its 872 residue polypeptide contains a multiple-membrane spanning sequence at the N-terminus and a PP2C phosphatase domain at the C-terminus. The central segment that binds to FtsZ is unlike domains of known structure or function, moreover the domain boundaries are poorly defined and this has hampered the expression of soluble fragments of SpoIIE at the levels required for structural studies. Here we have screened over 9000 genetic constructs of spoIIE using a random incremental truncation library approach, ESPRIT, to identify a number of soluble C-terminal fragments of SpoIIE that were aligned with the protein sequence to map putative domains and domain boundaries. The expression and purification of three fragments were optimised, yielding multimilligram quantities of the PP2C phosphatase domain, the putative FtsZ-binding domain and a larger fragment encompassing both these domains. All three fragments are monomeric and the PP2C domain-containing fragments have phosphatase activity
Artificial coiled coil biomineralisation protein for the synthesis of magnetic nanoparticles
Green synthesis of precise inorganic nanomaterials is a major challenge. Magnetotactic bacteria biomineralise magnetite nanoparticles (MNPs) within membrane vesicles (magnetosomes), which are embedded with dedicated proteins that control nanocrystal formation. Some such proteins are used in vitro to control MNP formation in green synthesis; however, these membrane proteins self-aggregate, making their production and use in vitro challenging and difficult to scale. Here, we provide an alternative solution by displaying active loops from biomineralisation proteins Mms13 and MmsF on stem-loop coiled-coil scaffold proteins (Mms13cc/MmsFcc). These artificial biomineralisation proteins form soluble, stable alpha-helical hairpin monomers, and MmsFcc successfully controls the formation of MNP when added to magnetite synthesis, regulating synthesis comparably to native MmsF. This study demonstrates how displaying active loops from membrane proteins on coiled-coil scaffolds removes membrane protein solubility issues, while retains activity, enabling a generic approach to readily-expressible, versatile, artificial membrane proteins for more accessible study and exploitation
Nucleation kinetics of crystalline phases from a kaolinitic body used in the processing of red ceramics
Grain Surface Models and Data for Astrochemistry
AbstractThe cross-disciplinary field of astrochemistry exists to understand the formation, destruction, and survival of molecules in astrophysical environments. Molecules in space are synthesized via a large variety of gas-phase reactions, and reactions on dust-grain surfaces, where the surface acts as a catalyst. A broad consensus has been reached in the astrochemistry community on how to suitably treat gas-phase processes in models, and also on how to present the necessary reaction data in databases; however, no such consensus has yet been reached for grain-surface processes. A team of ∼25 experts covering observational, laboratory and theoretical (astro)chemistry met in summer of 2014 at the Lorentz Center in Leiden with the aim to provide solutions for this problem and to review the current state-of-the-art of grain surface models, both in terms of technical implementation into models as well as the most up-to-date information available from experiments and chemical computations. This review builds on the results of this workshop and gives an outlook for future directions
First M87 Event Horizon Telescope results. IX.: detection of near-horizon circular polarization
Galaxie
- …