Adventitious shoot regeneration in Sesame (Sesamum indicum L.) (Pedaliaceae) via deembryonated cotyledonary explants

ABSTRACT Adventitious shoot regeneration in sesame, via de-embryonated cotyledonary explants, was attempted using six diverse genotypes; two were land races (Kankapura Local -KNL and Tamil Nadu Local-TNL), three were released varieties (DS-1, DSS-9 and WII) and a breeding line (RT-273). Three media compositions (½ MS basal media supplemented with 20 μM TDZ + 2.5 μM IAA and with or without 25 μM BAP and full MS basal media supplemented with only 25 μM BAP) were used of which highest shoot regeneration (100%) with 8.15 and 7.37 shoot numbers per cotyledon was achieved in RT-273 in both the combinations (½ MS with 20 µM TDZ+ 2.5 µM IAA+ 25 µM BAP or without BAP) followed by DS-1(100% and 95.55% with 6.15 and 3.89), KNL (88.88% and 7.55) and TNL (88.88% and 5.73) respectively in ½ MS with 20 µM TDZ+ 2.5 µM IAA+ 25 µM BAP. MS with 25 µM BAP alone failed to induce shoot regeneration

Design and manufacture of a novel system to simulate the biomechanics of basic and pitching shoulder motion

Objectives: Cadaveric models of the shoulder evaluate discrete motion segments using the glenohumeral joint in isolation over a defined trajectory. The aim of this study was to design, manufacture and validate a robotic system to accurately create three-dimensional movement of the upper body and capture it using high-speed motion cameras. Methods: In particular, we intended to use the robotic system to simulate the normal throwing motion in an intact cadaver. The robotic system consists of a lower frame (to move the torso) and an upper frame (to move an arm) using seven actuators. The actuators accurately reproduced planned trajectories. The marker setup used for motion capture was able to determine the six degrees of freedom of all involved joints during the planned motion of the end effector. Results: The testing system demonstrated high precision and accuracy based on the expected versus observed displacements of individual axes. The maximum coefficient of variation for displacement of unloaded axes was less than 0.5% for all axes. The expected and observed actual displacements had a high level of correlation with coefficients of determination of 1.0 for all axes. Conclusions: Given that this system can accurately simulate and track simple and complex motion, there is a new opportunity to study kinematics of the shoulder under normal and pathological conditions in a cadaveric shoulder model

Design and manufacture of a novel system to simulate the biomechanics of basic and pitching shoulder motion

Objectives Cadaveric models of the shoulder evaluate discrete motion segments using the glenohumeral joint in isolation over a defined trajectory. The aim of this study was to design, manufacture and validate a robotic system to accurately create three-dimensional movement of the upper body and capture it using high-speed motion cameras. Methods In particular, we intended to use the robotic system to simulate the normal throwing motion in an intact cadaver. The robotic system consists of a lower frame (to move the torso) and an upper frame (to move an arm) using seven actuators. The actuators accurately reproduced planned trajectories. The marker setup used for motion capture was able to determine the six degrees of freedom of all involved joints during the planned motion of the end effector. Results The testing system demonstrated high precision and accuracy based on the expected versus observed displacements of individual axes. The maximum coefficient of variation for displacement of unloaded axes was less than 0.5% for all axes. The expected and observed actual displacements had a high level of correlation with coefficients of determination of 1.0 for all axes. Conclusions Given that this system can accurately simulate and track simple and complex motion, there is a new opportunity to study kinematics of the shoulder under normal and pathological conditions in a cadaveric shoulder model.</br

Subsequent Surgery After Revision Anterior Cruciate Ligament Reconstruction: Rates and Risk Factors From a Multicenter Cohort

BACKGROUND: While revision anterior cruciate ligament reconstruction (ACLR) can be performed to restore knee stability and improve patient activity levels, outcomes after this surgery are reported to be inferior to those after primary ACLR. Further reoperations after revision ACLR can have an even more profound effect on patient satisfaction and outcomes. However, there is a current lack of information regarding the rate and risk factors for subsequent surgery after revision ACLR. PURPOSE: To report the rate of reoperations, procedures performed, and risk factors for a reoperation 2 years after revision ACLR. STUDY DESIGN: Case-control study; Level of evidence, 3. METHODS: A total of 1205 patients who underwent revision ACLR were enrolled in the Multicenter ACL Revision Study (MARS) between 2006 and 2011, composing the prospective cohort. Two-year questionnaire follow-up was obtained for 989 patients (82%), while telephone follow-up was obtained for 1112 patients (92%). If a patient reported having undergone subsequent surgery, operative reports detailing the subsequent procedure(s) were obtained and categorized. Multivariate regression analysis was performed to determine independent risk factors for a reoperation. RESULTS: Of the 1112 patients included in the analysis, 122 patients (11%) underwent a total of 172 subsequent procedures on the ipsilateral knee at 2-year follow-up. Of the reoperations, 27% were meniscal procedures (69% meniscectomy, 26% repair), 19% were subsequent revision ACLR, 17% were cartilage procedures (61% chondroplasty, 17% microfracture, 13% mosaicplasty), 11% were hardware removal, and 9% were procedures for arthrofibrosis. Multivariate analysis revealed that patients aged <20 years had twice the odds of patients aged 20 to 29 years to undergo a reoperation. The use of an allograft at the time of revision ACLR (odds ratio [OR], 1.79; P = .007) was a significant predictor for reoperations at 2 years, while staged revision (bone grafting of tunnels before revision ACLR) (OR, 1.93; P = .052) did not reach significance. Patients with grade 4 cartilage damage seen during revision ACLR were 78% less likely to undergo subsequent operations within 2 years. Sex, body mass index, smoking history, Marx activity score, technique for femoral tunnel placement, and meniscal tearing or meniscal treatment at the time of revision ACLR showed no significant effect on the reoperation rate. CONCLUSION: There was a significant reoperation rate after revision ACLR at 2 years (11%), with meniscal procedures most commonly involved. Independent risk factors for subsequent surgery on the ipsilateral knee included age <20 years and the use of allograft tissue at the time of revision ACLR

Grand Challenges in global eye health: a global prioritisation process using Delphi method

Background We undertook a Grand Challenges in Global Eye Health prioritisation exercise to identify the key issues that must be addressed to improve eye health in the context of an ageing population, to eliminate persistent inequities in health-care access, and to mitigate widespread resource limitations. Methods Drawing on methods used in previous Grand Challenges studies, we used a multi-step recruitment strategy to assemble a diverse panel of individuals from a range of disciplines relevant to global eye health from all regions globally to participate in a three-round, online, Delphi-like, prioritisation process to nominate and rank challenges in global eye health. Through this process, we developed both global and regional priority lists. Findings Between Sept 1 and Dec 12, 2019, 470 individuals complete round 1 of the process, of whom 336 completed all three rounds (round 2 between Feb 26 and March 18, 2020, and round 3 between April 2 and April 25, 2020) 156 (46%) of 336 were women, 180 (54%) were men. The proportion of participants who worked in each region ranged from 104 (31%) in sub-Saharan Africa to 21 (6%) in central Europe, eastern Europe, and in central Asia. Of 85 unique challenges identified after round 1, 16 challenges were prioritised at the global level; six focused on detection and treatment of conditions (cataract, refractive error, glaucoma, diabetic retinopathy, services for children and screening for early detection), two focused on addressing shortages in human resource capacity, five on other health service and policy factors (including strengthening policies, integration, health information systems, and budget allocation), and three on improving access to care and promoting equity. Interpretation This list of Grand Challenges serves as a starting point for immediate action by funders to guide investment in research and innovation in eye health. It challenges researchers, clinicians, and policy makers to build collaborations to address specific challenge

Overexpression, purification, crystallization and preliminary X-ray analysis of uracil N-glycosylase from Mycobacterium tuberculosis in complex with a proteinaceous inhibitor

Uracil N-glycosylase from M. tuberculosis has been crystallized in complex with a proteinaceous inhibitor (Ugi) and X-ray diffraction data have been collected

Functional characterization of recombinant major envelope protein (rB2L) of orf virus.

Orf, or contagious ecthyma, a highly contagious transboundary disease of sheep and goats, is caused by a double-stranded DNA virus (ORFV) belonging to the genus Parapoxvirus of the family Poxviridae. The ORFV genome encodes the major envelope proteins B2L and F1L, which have been found to be highly immunogenic and have multiple functional characteristics. In order to investigate the functional properties of the B2L protein, in this study, the B2L gene of ORFV strain 59/05, encoding recombinant mature B2L (aa 1M-D334), was produced as a fusion protein in Escherichia coli. The functional characteristics of purified rB2L fusion protein (~60 kDa) were evaluated in vivo and in vitro, showing that this protein had lipase and immunomodulatory activities. Immunization trials involving laboratory animals (mice, rabbits and guinea pigs) using either constant or graded doses of rB2L fusion protein with or without adjuvants (FCA, alum) as well as co-administration with candidate rErns-Ag protein of classical swine fever virus (CSFV) indicated that the rB2L protein is immunogenic and has immunomodulatory properties. This study shows the potential utility of the rB2L protein as a safe and novel adjuvant in veterinary vaccine formulations