Irrigation application efficiency and uniformity of water distribution using multi-outlet pipe and resource conservation technologies

Irrigation experiments were conducted during November to April under wheat crop in the winter season of 2012-13 and 2013-14 in the farmer’s field at Galibkhedi village located in Karnal District, Haryana State, India. In the study, collapsible multi-outlet pipe (MOP) along with single outlets pipe (SOP) was tested in farmer’s field under wheat cultivation. Irrigation was carried out in five treatments including tillage (T) with SOP and MOP; zero-tillage (ZT) with SOP and MOP, and furrow irrigation with raised bed (FIRB). Iso-time profile of waterfront spreading and advance indicated that irrigation water distribution was uniform under the plot irrigated using MOP as compared to plot irrigated using SOP. In addition, water distribution was uniform under zero tilled plots as compared to tilled plot. Results implied that MOP has several advantages over SOP in terms of application efficiency (AE) and uniformity of water distribution. Average application efficiency for the first study year was found to be in the order of ZT-MOP (82.41%) > FIRB (76.79%) > ZT-SOP (75.25%) > T-MOP (74.85%) > T-SOP (69.79%). Average application efficiency for the second study year was found to be in the same order as first year with some deviation in values. In the second year values of mean application efficiencies were ZT-MOP (82.58%) > FIRB (77.13%) > ZT-SOP (73.04%) > T-MOP (69.65%) > T-SOP (66.13%). Overall, this study concludes that irrigation under wheat crop using collapsible multi-outlet pipe (MOP) with zero tillage practices is a suitable option for surface irrigation that accomplishes uniform distribution of water with higher application efficiency

Design of an electrochemical micromachining machine

Electrochemical micromachining (μECM) is a non-conventional machining process based on the phenomenon of electrolysis. μECM became an attractive area of research due to the fact that this process does not create any defective layer after machining and that there is a growing demand for better surface integrity on different micro applications including microfluidics systems, stress-free drilled holes in automotive and aerospace manufacturing with complex shapes, etc. This work presents the design of a next generation μECM machine for the automotive, aerospace, medical and metrology sectors. It has three axes of motion (X, Y, Z) and a spindle allowing the tool-electrode to rotate during machining. The linear slides for each axis use air bearings with linear DC brushless motors and 2-nm resolution encoders for ultra precise motion. The control system is based on the Power PMAC motion controller from Delta Tau. The electrolyte tank is located at the rear of the machine and allows the electrolyte to be changed quickly. This machine features two process control algorithms: fuzzy logic control and adaptive feed rate. A self-developed pulse generator has been mounted and interfaced with the machine and a wire ECM grinding device has been added. The pulse generator has the possibility to reverse the pulse polarity for on-line tool fabrication.The research reported in this paper is supported by the European Commission within the project “Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)” (FP7-2011-NMPICT- FoF-285614)

Improving drought tolerance in rice: Ensuring food security through multi‐dimensional approaches

Drought has been highly prevalent around the world especially in Sub-Saharan Africa and South-East Asian countries. Consistent climatic instabilities and unpredictable rainfall patterns are further worsening the situation. Rice is a C 3 staple cereal and an important food crop for the majority of the world's population and drought stress is one of the major growth retarding threats for rice that slashes down grain quality and yield. Drought deteriorates rice productivity and induces various acclimation responses that aids in stress mitigation. However, the complexity of traits associated with drought tolerance has made the understanding of drought stress-induced responses in rice a challenging process. An integrative understanding based on physi- ological adaptations, omics, transgenic and molecular breeding approaches succes- sively backed up to developing drought stress-tolerant rice. The review represents a step forward to develop drought-resilient rice plants by exploiting the knowledge that collaborates with omics-based developments with integrative efforts to ensure the compilation of all the possible strategies undertaken to develop drought stress- tolerant rice

Micro-manufacturing : research, technology outcomes and development issues

Besides continuing effort in developing MEMS-based manufacturing techniques, latest effort in Micro-manufacturing is also in Non-MEMS-based manufacturing. Research and technological development (RTD) in this field is encouraged by the increased demand on micro-components as well as promised development in the scaling down of the traditional macro-manufacturing processes for micro-length-scale manufacturing. This paper highlights some EU funded research activities in micro/nano-manufacturing, and gives examples of the latest development in micro-manufacturing methods/techniques, process chains, hybrid-processes, manufacturing equipment and supporting technologies/device, etc., which is followed by a summary of the achievements of the EU MASMICRO project. Finally, concluding remarks are given, which raise several issues concerning further development in micro-manufacturing

SARS-CoV-2 receptor binding domain displayed on HBsAg virus–like particles elicits protective immunity in macaques

Authorized vaccines against SARS-CoV-2 remain less available in low- and middle-income countries due to insufficient supply, high costs, and storage requirements. Global immunity could still benefit from new vaccines using widely available, safe adjuvants, such as alum and protein subunits, suited to low-cost production in existing manufacturing facilities. Here, a clinical-stage vaccine candidate comprising a SARS-CoV-2 receptor binding domain–hepatitis B surface antigen virus–like particle elicited protective immunity in cynomolgus macaques. Titers of neutralizing antibodies (>104) induced by this candidate were above the range of protection for other licensed vaccines in nonhuman primates. Including CpG 1018 did not significantly improve the immunological responses. Vaccinated animals challenged with SARS-CoV-2 showed reduced median viral loads in bronchoalveolar lavage (~3.4 log10) and nasal mucosa (~2.9 log10) versus sham controls. These data support the potential benefit of this design for a low-cost modular vaccine platform for SARS-CoV-2 and other variants of concern or betacoronaviruses

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data

Kinetics of arylation of 3-bromo-benzophenone with n-butylacrylate using Nc palladacycle catalyst

The kinetics of arylation of n-butylacrylate (n-BA) with 3-bromo-benzophenone (BBP) using a monomeric palladacycle complex [Pd(ppy)(PPh<SUB>3</SUB>)(OTs)] (ppy = 2-phenylpyridine) catalyst has been studied. The effect of concentration of the substrate, base (NaOAc), and catalyst was studied at three different temperatures (413-433 K). The rate was found to be first order with respect to catalyst, first order tending to zero order with respect to n-butylacrylate and NaOAc concentrations. The rate passed through a maximum with variation of BBP concentration. The observed results have been explained on the basis of formation of Pd species (PdX<SUB>2</SUB>, PdX<SUB>3</SUB><SUP>-</SUP>, PdX<SUB>4</SUB><SUP>2-</SUP>, and Pd<SUB>2</SUB>X<SUB>6</SUB><SUP>2-</SUP>) which are inactive for the Heck reaction. Various empirical rate equations were considered to fit the rate data and the best fitting model has been selected. The rates predicted by model were found to be in good agreement with the observed experimental data

Not Available

Not Available.Not Availabl

Qualitative and Quantitative Content Determination of Macro-Minor Elements in Bryonia Alba L. Roots using Flame Atomic Absorption Spectroscopy Technique

Purpose: To determine the elements in Bryonia alba L. roots, collected from the Crimean Peninsula region in Ukraine. Methods: Dry ashing was used as a flexible method and all elements were determined using atomic absorption spectrometry (AAS) equipped with flame and graphite furnace. Results: The average concentrations of the determined elements, expressed as mg/100 g dry weight of the sample, were as follow: 13.000 for Fe, 78.000 for Si, 88.000 for P, 7.800 for Al, 0.130 for Mn, 105.000 for Mg, 0.030 for Pb, 0.052 for Ni, 0.030 for Mo, 210.000 for Ca, 0.130 for Cu, 5.200 for Zn, 13.000 for Na, 1170.000 for K, 0.780 for Sr, 0.030 for Co, 0.010 for Cd, 0.010 for As, and 0.010 for Hg. Toxic elements such as Cd and Pb were also found but at very low concentration. Among the analyzed elements, K was the most abundant followed by Ca, Mg, P, Si, Fe, Na, and Zn, whereas Hg, As, Cd, Co, Mo, and Pb were found in low concentration. Conclusion: The results suggest that the roots of Bryonia alba L. plant has potential medicinal property through their high element contents present. Moreover, it showed that the AAS method is a simple, fast, and reliable for the determination of elements in plant materials. The obtained results of the current study provide justification for the usage of such fruit in daily diet for nutrition and for medicinal usage in the treatment of various diseases