Dose and energy dependence of mechanical properties of focused electron beam induced pillar deposits from Cu(C5HF6O2)2

Bending and vibration tests performed inside the scanning electron microscope were used to mechanically characterize high-aspect pillars grown by focused electron-beam (FEB) induced deposition from the precursor Cu(C5HF6O2)2. Supported by finite element (FE) analysis the Young's modulus was determined from load-deflection measurements using cantilever-based force sensing and the material density from additional resonance vibration analysis. The pillar material consisted of a carbonaceous (C, O, F, H containing) matrix which embeds 5...10 at. % Cu deposited at 5 keV and 20 keV primary electron energy and 100 pA beam current, depending on primary electron energy. Young's moduli of the FEB deposits increased from 17+/-6 GPa to 25+/-8 GPa with increasing electron dose. The density of the carbonaceous matrix shows a dependence on the primary electron energy: 1.2+/-0.3 g cm-3 (5 keV) and 2.2+/-0.5 g cm-3 (20 keV). At a given primary energy a correlation with the irradiation dose is found. Quality factors determined from the phase relation at resonance of the fundamental pillar vibration mode were in the range of 150 to 600 and correlated to the deposited irradiation energy.Comment: 17 pages, 9 figures, 2 table

High-Fidelity 3D-Nanoprinting via Focused Electron Beams: Computer-Aided Design (3BID)

Currently, there are few techniques that allow true 3D-printing on the nanoscale. The most promising candidate to fill this void is focused electron-beam-induced deposition (FEBID), a resist-free, nanofabrication compatible, direct-write method. The basic working principles of a computer-aided design (CAD) program (3BID) enabling 3D-FEBID is presented and simultaneously released for download. The 3BID capability significantly expands the currently limited toolbox for 3D-nanoprinting, providing access to geometries for optoelectronic, plasmonic, and nanomagnetic applications that were previously unattainable due to the lack of a suitable method for synthesis. The CAD approach supplants trial and error toward more precise/accurate FEBID required for real applications/device prototyping.J.D.F., R.W., P.D.R., A.F.P., and H.P. acknowledge that the creation of the CAD environment was conducted at the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility. R.W. and H.P. gratefully acknowledge the valuable support provided from Prof. Dr. Ferdinand Hofer. R.W. and H.P. also acknowledge financial support by the COST action CELINA (Nr. CM1301), EUROSTARS project TRIPLE-S (Nr. E! 8213), the bmvit exchange program, and FFG—Production of the Future project SENTINEL (Nr. 850652). L.S., D.S.H., and A.F.P. acknowledge funding from EPSRC, grant numbers EP/M008517/1 and EP/L015978/1, and from the Winton Program for the Physics of Sustainability

Analysis of reflex modulation with a biologically realistic neural network

In this study, a neuromusculoskeletal model was built to give insight into the mechanisms behind the modulation of reflexive feedback strength as experimentally identified in the human shoulder joint. The model is an integration of a biologically realistic neural network consisting of motoneurons and interneurons, modeling 12 populations of spinal neurons, and a one degree-of-freedom musculoskeletal model, including proprioceptors. The model could mimic the findings of human postural experiments, using presynaptic inhibition of the Ia afferents to modulate the feedback gains. In a pathological case, disabling one specific neural connection between the inhibitory interneurons and the motoneurons could mimic the experimental findings in complex regional pain syndrome patients. It is concluded that the model is a valuable tool to gain insight into the spinal contributions to human motor control. Applications lay in the fields of human motor control and neurological disorders, where hypotheses on motor dysfunction can be tested, like spasticity, clonus, and tremor

Recovery of release cloud from laser shock-loaded graphite and hydrocarbon targets: in search of diamonds

This work presents first insights into the dynamics of free-surface release clouds from dynamically compressed polystyrene and pyrolytic graphite at pressures up to 200 GPa, where they transform into diamond or lonsdaleite, respectively. These ejecta clouds are released into either vacuum or various types of catcher systems, and are monitored with high-speed recordings (frame rates up to 10 MHz). Molecular dynamics simulations are used to give insights to the rate of diamond preservation throughout the free expansion and the catcher impact process, highlighting the challenges of diamond retrieval. Raman spectroscopy data show graphitic signatures on a catcher plate confirming that the shock-compressed PS is transformed. First electron microscopy analyses of solid catcher plates yield an outstanding number of different spherical-like objects in the size range between ten(s) up to hundreds of nanometres, which are one type of two potential diamond candidates identified. The origin of some objects can unambiguously be assigned, while the history of others remains speculative

Active Chromatin Marks Are Retained on X Chromosomes Lacking Gene or Repeat Silencing Despite XIST/Xist Expression in Somatic Cell Hybrids

X-chromosome inactivation occurs early in mammalian development and results in the inactive X chromosome acquiring numerous hallmarks of heterochromatin. While XIST is a key player in the inactivation process, the method of action of this ncRNA is yet to be determined.To assess which features of heterochromatin may be directly recruited by the expression and localization of the XIST RNA we have analyzed a mouse/human somatic cell hybrid in which expression of human and mouse XIST/Xist has been induced from the active X by demethylation. Such hybrids had previously been demonstrated to disconnect XIST/Xist expression from gene silencing and we confirm maintenance of X-linked gene expression, even close to the Xist locus, despite the localized expression of mouse Xist.Loss of the active chromatin marks H3 acetylation and H3 lysine 4 methylation was not observed upon XIST/Xist expression, nor was there a gain of DNA methylation; thus these marks of facultative heterochromatin are not solely dependent upon Xist expression. Cot-1 holes, regions of depleted RNA hybridization with a Cot-1 probe, were observed upon Xist expression; however, these were at reduced frequency and intensity in these somatic cells. Domains of human Cot-1 transcription were observed corresponding to the human chromosomes in the somatic cell hybrids. The Cot-1 domain of the X was not reduced with the expression of XIST, which fails to localize to the human X chromosome in a mouse somatic cell background. The human inactive X in a mouse/human hybrid cell also shows delocalized XIST expression and an ongoing Cot-1 domain, despite X-linked gene silencing. These results are consistent with recent reports separating Cot-1 silencing from genic silencing, but also demonstrate repetitive element expression from an otherwise silent X chromosome in these hybrid cells