Influences on the fraction of hydrophobic and hydrophilic black carbon in the atmosphere

Black carbon (BC) is a short term climate forcer that directly warms the atmosphere, slows convection, and hinders quantification of the effect of greenhouse gases on climate change. The atmospheric lifetime of BC particles with respect to nucleation scavenging in clouds is controlled by their ability to serve as cloud condensation nuclei (CCN). To serve as CCN under typical conditions, hydrophobic BC particles must acquire hygroscopic coatings. However, the quantitative relationship between coatings and hygroscopic properties for ambient BC particles is not known nor is the time scale for hydrophobic-to-hydrophilic conversion. Here we introduce a method for measuring the hygroscopicity of externally and internally mixed BC particles by coupling a single particle soot photometer with a humidified tandem differential mobility analyzer. We test this technique using uncoated and coated laboratory generated model BC compounds and apply it to characterize the hygroscopicity distribution of ambient BC particles. From these data we derive that the observed number fraction of BC that is CCN active at 0.2% supersaturation is generally low in an urban area near sources and that it varies with the trajectory of the airmass. We anticipate that our method can be combined with measures of air parcel physical and photochemical age to provide the first quantitative estimates for characterizing hydrophobic-to-hydrophilic conversion rates in the atmosphere.Peer reviewe

The interaction of frictional slip and adhesion for a stiff sphere on a compliant substrate

How friction affects adhesion is addressed. The problem is considered in the context of a very stiff sphere adhering to a compliant, isotropic, linear elastic substrate, and experiencing adhesion and frictional slip relative to each other. The adhesion is considered to be driven by very large attractive tractions between the sphere and the substrate that can act only at very small distances between them. As a consequence, the adhesion behavior can be represented by the Johnson-Kendall-Roberts model, and this is assumed to prevail also when frictional slip is occurring. Frictional slip is considered to be resisted by a uniform, constant shear traction at the slipping interface, a model that is considered to be valid for small asperities and for compliant elastomers in contact with stiff material. A model for the interaction of friction and adhesion, known to agree with some experimental data, is utilized. This model is due to Johnson, and its adhesion-friction interaction is assumed to stem, upon shrinkage of the contact area, from a postulated reversible energy release associated with frictional slip. This behavior is considered to arise from surface microstructures generated or eliminated by frictional slip, where these microstructures store some elastic strain energy in a reversible manner. The associated reversible energy release rate is derived from the energy exchanges that occur in the system. The Johnson model, and an asymptotic analysis of it for small amounts of frictional slip, is shown to be consistent with the reversible energy release rate that we identify.Comment: 11 page

An elementary 1-dimensional model for a solid state lithium-ion battery with a single ion conductor electrolyte and a lithium metal negative electrode

As noted above, this contribution is dedicated to Norman Fleck on the occasion of his 60th birthday. I have spent many happy hours in collaboration with Norman, and it has been highly productive, educational, rewarding and enjoyable to do so. I look forward to further interactions with him on the subject of this paper, lithium-ion batteries. This work was funded by the University of California, Santa Barbara and by the University of Aberdeen.Peer reviewedPostprin

Evolution of trace gases and particles emitted by a chaparral fire in California

Biomass burning (BB) is a major global source of trace gases and particles. Accurately representing the production and evolution of these emissions is an important goal for atmospheric chemical transport models. We measured a suite of gases and aerosols emitted from an 81 hectare prescribed fire in chaparral fuels on the central coast of California, US on 17 November 2009. We also measured physical and chemical changes that occurred in the isolated downwind plume in the first ~4 h after emission. The measurements were carried out onboard a Twin Otter aircraft outfitted with an airborne Fourier transform infrared spectrometer (AFTIR), aerosol mass spectrometer (AMS), single particle soot photometer (SP2), nephelometer, LiCor CO_2 analyzer, a chemiluminescence ozone instrument, and a wing-mounted meteorological probe. Our measurements included: CO_2; CO; NO_x; NH_3; non-methane organic compounds; organic aerosol (OA); inorganic aerosol (nitrate, ammonium, sulfate, and chloride); aerosol light scattering; refractory black carbon (rBC); and ambient temperature, relative humidity, barometric pressure, and three-dimensional wind velocity. The molar ratio of excess O_3 to excess CO in the plume (ΔO_3/ΔCO) increased from −5.13 (±1.13) × 10^(−3) to 10.2 (±2.16) × 10^(−2) in ~4.5 h following smoke emission. Excess acetic and formic acid (normalized to excess CO) increased by factors of 1.73 ± 0.43 and 7.34 ± 3.03 (respectively) over the same time since emission. Based on the rapid decay of C_2H_4 we infer an in-plume average OH concentration of 5.27 (±0.97) × 10^6 molec cm^(−3), consistent with previous studies showing elevated OH concentrations in biomass burning plumes. Ammonium, nitrate, and sulfate all increased over the course of 4 h. The observed ammonium increase was a factor of 3.90 ± 2.93 in about 4 h, but accounted for just ~36% of the gaseous ammonia lost on a molar basis. Some of the gas phase NH_3 loss may have been due to condensation on, or formation of, particles below the AMS detection range. NO_x was converted to PAN and particle nitrate with PAN production being about two times greater than production of observable nitrate in the first ~4 h following emission. The excess aerosol light scattering in the plume (normalized to excess CO_2) increased by a factor of 2.50 ± 0.74 over 4 h. The increase in light scattering was similar to that observed in an earlier study of a biomass burning plume in Mexico where significant secondary formation of OA closely tracked the increase in scattering. In the California plume, however, ΔOA/ΔCO_2 decreased sharply for the first hour and then increased slowly with a net decrease of ~20% over 4 h. The fraction of thickly coated rBC particles increased up to ~85% over the 4 h aging period. Decreasing OA accompanied by increased scattering/particle coating in initial aging may be due to a combination of particle coagulation and evaporation processes. Recondensation of species initially evaporated from the particles may have contributed to the subsequent slow rise in OA. We compare our results to observations from other plume aging studies and suggest that differences in environmental factors such as smoke concentration, oxidant concentration, actinic flux, and RH contribute significantly to the variation in plume evolution observations

Recent finite element studies in plasticity and fracture mechanics

Recent work on fundamentals of elastic--plastic finite-element analysis and its applications to the mechanics of crack opening and growth in ductile solids are reviewed. A precise formulation of incremental equilibrium equations and their finite-element forms in a manner valid for deformations of arbitrary magnitude is described. Special features of computational procedures are outlined for accuracy in view of the near-incompressibility of elastic--plastic response. Applications to crack mechanics include the analysis of large plastic defomations at a progressively opening crack tip, the determination of J integral values and of limitations to J characterizations of the intensity of the crack tip field, and the determination of crack tip fields in stable crack growth

Simulation of the contractile response of cells on an array of micro-posts

A bio-chemo-mechanical model has been used to predict the contractile responses of smooth cells on a bed of micro-posts. Predictions obtained for smooth muscle cells reveal that, by converging onto a single set of parameters, the model captures all of the following responses in a self-consistent manner: (i) the scaling of the force exerted by the cells with the number of posts; (ii) actin distributions within the cells, including the rings of actin around the micro-posts; (iii) the curvature of the cell boundaries between the posts; and (iv) the higher post forces towards the cell periphery. Similar correspondences between predictions and measurements have been demonstrated for fibroblasts and mesenchymal stem cells once the maximum stress exerted by the stress fibre bundles has been recalibrated. Consistent with measurements, the model predicts that the forces exerted by the cells will increase with both increasing post stiffness and cell area (or equivalently, post spacing). In conjunction with previous assessments, these findings suggest that this framework represents an important step towards a complete model for the coupled bio-chemo-mechanical responses of cells

The viscoplastic compaction of composite powders

Abstract A model for the densi_cation of spherical powders is developed for the early stages of cold and hot compaction under general loading[ General viscoplastic properties are adopted which reduce to strain hardening plasticity at ambient temperature and to power law creep at elevated temperature[ A large strain analysis is carried out to determine the macroscopic compaction behaviour\ based on the a.ne motion of particles with viscoplastic dissipation occurring at the contacts between particles[ Random packing is assumed and the model includes the increase in the number of contacts per particle with densi_cation[ A general prescription is given for computing the macroscopic stress as a function of strain rate and accumulated strain[ Detailed results are presented for yield surfaces and creep dissipation surfaces after isostatic and closed die compaction[ A scalar constraint factor is derived for a random mixture of two populations of particles with di}erent sizes and strengths [ The prediction

Black carbon measurements in the boundary layer over western and northern Europe

Europe is a densely populated region that is a significant global source of black carbon (BC) aerosol, but there is a lack of information regarding the physical properties and spatial/vertical distribution of rBC in the region. We present the first aircraft observations of sub-micron refractory BC (rBC) aerosol concentrations and physical properties measured by a single particle soot photometer (SP2) in the lower troposphere over Europe. The observations spanned a region roughly bounded by 50° to 60° N and from 15° W to 30° E. The measurements, made between April and September 2008, showed that average rBC mass concentrations ranged from about 300 ng m−3 near urban areas to approximately 50 ng m−3 in remote continental regions, lower than previous surface-based measurements. rBC represented between 0.5 and 3% of the sub-micron aerosol mass. Black carbon mass size distributions were log-normally distributed and peaked at approximately 180 nm, but shifted to smaller diameters (~160 nm) near source regions. rBC was correlated with carbon monoxide (CO) but had different ratios to CO depending on location and air mass. Light absorption coefficients were measured by particle soot absorption photometers on two separate aircraft and showed similar geographic patterns to rBC mass measured by the SP2. We summarize the rBC and light absorption measurements as a function of longitude and air mass age and also provide profiles of rBC mass concentrations and size distribution statistics. Our results will help evaluate model-predicted regional rBC concentrations and properties and determine regional and global climate impacts from rBC due to atmospheric heating and surface dimming