1,508 research outputs found
Digital control of diode laser for atmospheric spectroscopy
A system is described for remote absorption spectroscopy of trace species using a diode laser tunable over a useful spectral region of 50 to 200 cm(-1) by control of diode laser temperature over range from 15 K to 100 K, and tunable over a smaller region of typically 0.1 to 10 cm(-1) by control of the diode laser current over a range from 0 to 2 amps. Diode laser temperature and current set points are transmitted to the instrument in digital form and stored in memory for retrieval under control of a microprocessor during measurements. The laser diode current is determined by a digital to analog converter through a field effect transistor for a high degree of ambient temperature stability, while the laser diode temperature is determined by set points entered into a digital to analog converter under control of the microprocessor. Temperature of the laser diode is sensed by a sensor diode to provide negative feedback to the temperature control circuit that responds to the temperature control digital to analog converter
COMPARING MANAGEMENT SYSTEMS FOR BEEF CATTLE BACKGROUNDING: A MULTIDISCIPLINARY APPROACH
Livestock Production/Industries,
Picosecond electrical spectroscopy using monolithic GaAs circuits
This article describes an experimental apparatus for free-space mm-wave transmission measurements (spectroscopy). GaAs nonlinear transmission lines and sampling circuits are used as picosecond pulse generators and detectors, with planar monolithic bowtie antennas with associated substrate lenses used as the radiating and receiving elements. The received pulse is 270 mV amplitude and 2.4 ps rise time. Through Fourier transformation of the received pulse, 30–250 GHz measurements are demonstrated with <=0.3 dB (rms) accuracy
Millimeter and submillimeter wave technology developments for the next generation of fusion devices
There is increasing demand for compact watt-level coherent sources in the millimeter and submillimeter wave region. The approach that we have taken to satisfy this need is to fabricate two-dimensional grids loaded with oscillators, electronic beam steerers, and frequency multipliers for quasioptical coherent spatial combining of the outputs of a large number of low-power devices
Thermal emission from low-field neutron stars
We present a new grid of LTE model atmospheres for weakly magnetic
(B<=10e10G) neutron stars, using opacity and equation of state data from the
OPAL project and employing a fully frequency- and angle-dependent radiation
transfer. We discuss the differences from earlier models, including a
comparison with a detailed NLTE calculation. We suggest heating of the outer
layers of the neutron star atmosphere as an explanation for the featureless
X-ray spectra of RX J1856.5-3754 and RX J0720.4-3125 recently observed with
Chandra and XMM.Comment: 8 pages A&A(5)-Latex, 6 Figures, A&A in press. The model spectra
presented here are available as XSPEC tables at
http://www.astro.soton.ac.uk/~btg/outgoing/nsspec
A 10 GHz Quasi-Optical Grid Amplifier Using Integrated HBT Differential Pairs
We report the fabrication and testing of a 10 GHz grid amplifier utilizing sixteen GaAs chips each
containing an HBT differential pair plus integral bias/feedback resistors. The overall amplifier consists of
a 4x4 array of unit cells on an RT Duroid™ board having a relative permittivity of 2.2. Each unit cell
consists of an emitter-coupled differential pair at the center, an input antenna which extends horizontally
in both directions from the two base leads, an output antenna which extends vertically in both directions
from the two collector leads, and high inductance bias lines. In operation, the active grid array is placed
between a pair of crossed polarizers. The horizontally polarized input wave passes through the input
polarizer and couples to the input leads. An amplified current then flows on the vertical leads, which
radiate a vertically polarized amplified signal through the output polarizer. The polarizers serve dual
functions, providing both input-output isolation as well as independent impedance matching for the input
and output ports. The grid thus functions essentially as a free-space beam amplifier. Calculations indicate
that output powers of several watts per square centimeter of grid area should be attainable with optimized
structures
The X-ray Spectrum and Light Curve of Supernova 1995N
We report on multi-epoch X-ray observations of the Type IIn (narrow emission
line) supernova SN 1995N with the ROSAT and ASCA satellites. The January 1998
ASCA X-ray spectrum is well fitted by a thermal bremsstrahlung (kT~10 keV,
N_H~6e20 cm^-2) or power-law (alpha~1.7, N_H~1e21 cm^-2) model. The X-ray light
curve shows evidence for significant flux evolution between August 1996 and
January 1998: the count rate from the source decreased by 30% between our
August 1996 and August 1997 ROSAT observations, and the X-ray luminosity most
likely increased by a factor of ~2 between our August 1997 ROSAT and January
1998 ASCA observations, although evolution of the spectral shape over this
interval is not ruled out. The high X-ray luminosity, L_X~1e41 erg/sec, places
SN 1995N in a small group of Type IIn supernovae with strong circumstellar
interaction, and the evolving X-ray luminosity suggests that the circumstellar
medium is distributed inhomogeneously.Comment: MNRAS accepted. 6 pages, 2 figures; uses mn.sty and psfi
Evaluating the transferability of coarse-grained, density-dependent implicit solvent models to mixtures and chains
Previously, we described a coarse-graining method for creating local density-dependent implicit solvent (DDIS) potentials that reproduce the radial distribution function (RDF) and solute excess chemical potential across a range of particle concentrations [ E. C. Allen and G. C. Rutledge, J. Chem. Phys. 128, 154115 (2008) ]. In this work, we test the transferability of these potentials, derived from simulations of monomeric solute in monomeric solvent, to mixtures of solutes and to solute chains in the same monomeric solvent. For this purpose, “transferability” refers to the predictive capability of the potentials without additional optimization. We find that RDF transferability to mixtures is very good, while RDF errors in systems of chains increase linearly with chain length. Excess chemical potential transferability is good for mixtures at low solute concentration, chains, and chains of mixed composition; at higher solute concentrations in mixtures, chemical potential transferability fails due to the nature of the DDIS potentials, in which particle insertion directly affects the interaction potential. With these results, we demonstrate that DDIS potentials derived for pure solutes can be used effectively in the study of many important systems including those involving mixtures, chains, and chains of mixed composition in monomeric solvent.United States. Dept. of Energy (Computational Sciences Graduate Fellowship
- …