Anti-vibration gloves and the forearm efforts during tools operations

The objective of this paper is to analyze the forearm muscular contraction levels associated to the use of anti-vibration gloves, by comparing the contraction levels with gloves and without gloves. Two different vibration tools were used in a simulated work environment: (1) A compact Duty Multi-Cutter Bosch and (2) and a Percussion Drill with a drill bit Ø20 mm. Standard operations were performed by each subject in the following materials: (1) Performing cross- sectional cuts in 80x40 mm pine section and (2) performing 20 mm diameter holes in a concrete slab 2 x 2 m, 70 mm thick. The forearm contraction level were measured by surface electromyography in four different muscles: Flexor Digitorum Superficialis (FDS), Flexor Carpi Ulnaris (FCU), Extensor Carpi Radialis Longus (ECRL) e Extensor Carpi Ulnaris (ECU). For the flexor muscles (FDS, FCU), an increase tendency in muscular contraction was observed when the operations are performed without gloves (2-5% MVE increase in the FDS and 3-9% MVE increase in the FCU). For the extensor muscles ECU a decrease tendency in muscular contraction was observed when the operations are performed without gloves (1-10% MVE decrease). Any tendency was found in the ECRL muscle. ECU was the muscle with the highest contraction level for 79% and 71% of the operators, during the operations respectively with the multi-cutter (P50= 27-30%MVE) and with the percussion drill (P50=46-55%MVE). As a final conclusion from this study, anti- vibration gloves may increase the forearm fatigue in the posterior region of the forearm (ECU muscle) during operations with the mentioned tool

Ankle Foot Orthosis (AFO) stiffness design for mitigation of ankle inversion injury

Foundation for Science and Technology (FCT), through IDMEC, under LAETA [project number UID/EMS/50022/2019]. UNIDEMI [project number UID/EMS/00667/2019].Modelling and simulation of human movement has the potential to improve the design of medical devices and rehabilitation process by enabling the identification of cause-effect relationships in individuals suffering from neurological and musculoskeletal issues. The main goal of this work was to provide a simulation-based stiffness design for an Ankle Foot Orthosis (AFO) that can help to mitigate the risk of a sprain by ankle inversion during the landing in freefall which is known to occur for subtalar angles higher than 25 degrees. Computational simulations were performed using human movement models with and without a passive AFO, to access the AFO sensitivity for the translational stiffness that prevents the cuff from translating with respect to the footplate. The Design of Experiments (DoE) methodology was used to access sensitivities between the three principal directions of the AFO stiffness. Results revealed that the ankle inversion angle was less than 25 degrees when increasingly larger values of translational stiffness were used, although a nonlinear behaviour was observed between the three principal directions of the AFO stiffness, for which injury safe design configurations were obtained.authorsversionpublishe

Anti-vibration gloves and the forearm efforts during tools operations

The objective of this paper is to analyze the forearm muscular contraction levels associated to the use of anti-vibration gloves, by comparing the contraction levels with gloves and without gloves. Two different vibration tools were used in a simulated work environment: (1) A compact Duty Multi-Cutter Bosch and (2) and a Percussion Drill with a drill bit Ø20 mm. Standard operations were performed by each subject in the following materials: (1) Performing cross- sectional cuts in 80x40 mm pine section and (2) performing 20 mm diameter holes in a concrete slab 2 x 2 m, 70 mm thick. The forearm contraction level were measured by surface electromyography in four different muscles: Flexor Digitorum Superficialis (FDS), Flexor Carpi Ulnaris (FCU), Extensor Carpi Radialis Longus (ECRL) e Extensor Carpi Ulnaris (ECU). For the flexor muscles (FDS, FCU), an increase tendency in muscular contraction was observed when the operations are performed without gloves (2-5% MVE increase in the FDS and 3-9% MVE increase in the FCU). For the extensor muscles ECU a decrease tendency in muscular contraction was observed when the operations are performed without gloves (1-10% MVE decrease). Any tendency was found in the ECRL muscle. ECU was the muscle with the highest contraction level for 79% and 71% of the operators, during the operations respectively with the multi-cutter (P50= 27-30%MVE) and with the percussion drill (P50=46-55%MVE). As a final conclusion from this study, anti- vibration gloves may increase the forearm fatigue in the posterior region of the forearm (ECU muscle) during operations with the mentioned tool

Mechanical Behaviour of Corrugated Laminates

The present research work intends to perform a wide set of structural analyses upon corrugated composite laminated panels and based on these analyses, to assess their mechanical response in correspondence to the constructive solutions, which may range from the composite materials selection to the geometrical features and other modelling parameters. To improve the mechanical performance of those panels one may consider enhancing their geometrical characteristics, their corrugation shape configuration and the materials used to build them. In this latter case, when considering materials selection, laminated composites may also constitute an important alternative. In any case it is considered necessary to assess the impact that each of these parameters may have in the static and in the free vibration behaviour of the structures, in a comprehensive and detailed way. To achieve the main objective of this research work, a comprehensive and diversified set of case studies is considered in order to characterize the influence that each of the modelling, material and geometrical parameters and characteristics may have in the mechanical response of a corrugated panel. This study allowed concluding that for the wide set of design parameters considered, the fibre orientation and corrugation parameters are the ones responsible for the majority of the significantly improved performances

Mechanical Behaviour of Corrugated Laminates

The present research work intends to perform a wide set of structural analyses upon corrugated composite laminated panels and based on these analyses, to assess their mechanical response in correspondence to the constructive solutions, which may range from the composite materials selection to the geometrical features and other modelling parameters. To improve the mechanical performance of those panels one may consider enhancing their geometrical characteristics, their corrugation shape configuration and the materials used to build them. In this latter case, when considering materials selection, laminated composites may also constitute an important alternative. In any case it is considered necessary to assess the impact that each of these parameters may have in the static and in the free vibration behaviour of the structures, in a comprehensive and detailed way. To achieve the main objective of this research work, a comprehensive and diversified set of case studies is considered in order to characterize the influence that each of the modelling, material and geometrical parameters and characteristics may have in the mechanical response of a corrugated panel. This study allowed concluding that for the wide set of design parameters considered, the fibre orientation and corrugation parameters are the ones responsible for the majority of the significantly improved performances

Mechanical Behaviour of Corrugated Laminates

The present research work intends to perform a wide set of structural analyses upon corrugated composite laminated panels and based on these analyses, to assess their mechanical response in correspondence to the constructive solutions, which may range from the composite materials selection to the geometrical features and other modelling parameters. To improve the mechanical performance of those panels one may consider enhancing their geometrical characteristics, their corrugation shape configuration and the materials used to build them. In this latter case, when considering materials selection, laminated composites may also constitute an important alternative. In any case it is considered necessary to assess the impact that each of these parameters may have in the static and in the free vibration behaviour of the structures, in a comprehensive and detailed way. To achieve the main objective of this research work, a comprehensive and diversified set of case studies is considered in order to characterize the influence that each of the modelling, material and geometrical parameters and characteristics may have in the mechanical response of a corrugated panel. This study allowed concluding that for the wide set of design parameters considered, the fibre orientation and corrugation parameters are the ones responsible for the majority of the significantly improved performances

Who acquires infection from whom? Estimating herpesvirus transmission rates between wild rodent host groups

To date, few studies of parasite epidemiology have investigated ‘who acquires infection from whom’ in wildlife populations. Nonetheless, identifying routes of disease transmission within a population, and determining the key groups of individuals that drive parasite transmission and maintenance, are fundamental to understanding disease dynamics. Gammaherpesviruses are a widespread group of DNA viruses that infect many vertebrate species, and murine gammaherpesviruses (i.e. MuHV-4) are a standard lab model for studying human herpesviruses, for which much about the pathology and immune response elicited to infection is well understood. However, despite this extensive research effort, primarily in the lab, the transmission route of murine gammaherpesviruses within their natural host populations is not well understood. Here, we aimed to understand wood mouse herpesvirus (WMHV) transmission, by fitting a series of population dynamic models to field data on wood mice naturally infected with WMHV and then estimating transmission parameters within and between demographic groups of the host population. Different models accounted for different combinations of host sex (male/female), age (subadult/adult) and transmission functions (density/frequency-dependent). We found that a density-dependent transmission model incorporating explicit sex groups fitted the data better than all other proposed models. Male-to-male transmission was the highest among all possible combinations of between- and within-sex transmission classes, suggesting that male behaviour is a key factor driving WMHV transmission. Our models also suggest that transmission between sexes, although important, wasn’t symmetrical, with infected males playing a significant role in infecting naïve females but not vice versa. Overall this work shows the power of coupling population dynamic models with long-term field data to elucidate otherwise unobservable transmission processes in wild disease systems

In vivo imaging of murid herpesvirus-4 infection

Luciferase-based imaging allows a global view of microbial pathogenesis. We applied this technique to gammaherpesvirus infection by inserting a luciferase expression cassette into the genome of murine herpesvirus-4 (MuHV-4). The recombinant virus strongly expressed luciferase in lytically infected cells without significant attenuation. We used it to compare different routes of virus inoculation. After intranasal infection of anaesthetized mice, luciferase was expressed in the nose and lungs for 7–10 days and in lymphoid tissue, most consistently the superficial cervical lymph nodes, for up to 30 days. Gastrointestinal infection was not observed. Intraperitoneal infection was very different to intranasal, with strong luciferase expression in the liver, kidneys, intestines, reproductive tract and spleen, but none in the nose or lungs. The nose has not previously been identified as a site of MuHV-4 infection. After intranasal infection of non-anaesthetized mice, it was the only site of non-lymphoid luciferase expression. Nevertheless, lymphoid colonization and persistence were still established, even at low inoculation doses. In contrast, virus delivered orally was very poorly infectious. Inoculation route therefore had a major impact on pathogenesis. Low dose intranasal infection without anaesthesia seems most likely to mimic natural transmission, and may therefore be particularly informative about normal viral gene functions

An In Vitro System for Studying Murid Herpesvirus-4 Latency and Reactivation

The narrow species tropisms of Epstein-Barr Virus (EBV) and the Kaposi's Sarcoma -associated Herpesvirus (KSHV) have made Murid Herpesvirus-4 (MuHV-4) an important tool for understanding how gammaherpesviruses colonize their hosts. However, while MuHV-4 pathogenesis studies can assign a quantitative importance to individual genes, the complexity of in vivo infection can make the underlying mechanisms hard to discern. Furthermore, the lack of good in vitro MuHV-4 latency/reactivation systems with which to dissect mechanisms at the cellular level has made some parallels with EBV and KSHV hard to draw. Here we achieved control of the MuHV-4 lytic/latent switch in vitro by modifying the 5′ untranslated region of its major lytic transactivator gene, ORF50. We terminated normal ORF50 transcripts by inserting a polyadenylation signal and transcribed ORF50 instead from a down-stream, doxycycline-inducible promoter. In this way we could establish fibroblast clones that maintained latent MuHV-4 episomes without detectable lytic replication. Productive virus reactivation was then induced with doxycycline. We used this system to show that the MuHV-4 K3 gene plays a significant role in protecting reactivating cells against CD8+ T cell recognition

Comparison of the pathogenesis of the highly passaged MCMV Smith strain with that of the low passaged MCMV HaNa1 isolate in BALB/c mice upon oronasal inoculation

Murine cytomegalovirus (MCMV) Smith strain is widely used in mouse models to study HCMV infections. Due to high serial passages, MCMV Smith has acquired genetic and biological changes. Therefore, a low passaged strain would be more relevant to develop mouse models. Here, the pathogenesis of an infection with MCMV Smith was compared with that of an infection with a low passaged Belgian MCMV isolate HaNa1 in BALB/c adult mice following oronasal inoculation with either a low (10(4) TCID50/mouse) or high (10(6) TCID50/mouse) inoculation dose. Both strains were mainly replicating in nasal mucosa and submandibular glands for one to two months. In nasal mucosa, MCMV was detected earlier and longer (1-49 days post inoculation (dpi)) and reached higher titers with the high inoculation dose compared to the low inoculation dose (14-35 dpi). In submandibular glands, a similar finding was observed (high dose: 7-49 dpi; low dose: 14-42 dpi). In lungs, both strains showed a restricted replication. In spleen, liver and kidneys, only the Smith strain established a productive infection. The infected cells were identified as olfactory neurons and sustentacular cells in olfactory epithelium, macrophages and dendritic cells in NALT, acinar cells in submandibular glands, and macrophages and epithelial cells in lungs for both strains. Antibody analysis demonstrated for both strains that IgG(2a) was the main detectable antibody subclass. Overall, our results show that significant phenotypic differences exist between the two strains. MCMV HaNa1 has been shown to be interesting for use in mouse models in order to get better insights for HCMV infections in immunocompetent humans