Physical Properties of Denture Base Resins Potentially Resistant to \u3cem\u3eCandida\u3c/em\u3e Adhesion

Purpose: The addition of anionic charge on denture base resins has been shown to inhibit Candida albicans adhesion and to facilitate adsorption of salivary defense molecules. The aim of this study was to evaluate the physical properties of a modified denture base resin for denture fabrication. Materials and Methods: Specimens made from heat polymerizing resin Lucitone 199 were used as the control group. The two experimental groups, E-10 and E-20, had 10% and 20%, respectively, of the monomer substituted with an experimental phosphate-containing monomer. Flexural strength and modulus, water sorption, solubility, and color stability tests were conducted to ensure compliance with ADA specification No. 12. Water diffusion coefficient into the resins and stainability were also assessed. ANOVA and Scheffé tests were performed for statistical significance. Results: There was an overall decline in all properties with the addition of the experimental phosphate compound. The flexural strength and modulus, water sorption and solubility for E-10, as well as the control were, however, within the ADA specifications. The diffusion coefficients were significantly different (p \u3c 0.05) for the three groups. Staining and color specimens showed no significant difference (p \u3e 0.05) among the three groups. Conclusions: Within the limitations of this study, the physical properties of the phosphate denture base resin at 10% should be suitable for denture fabrication based on the properties assessed

Decays of bottom mesons emitting tensor meson in final state using ISGW II model

In this paper, we investigate phenomenologically two-body weak decays of the bottom mesons emitting pseudoscalar/vector meson and a tensor meson. Form factors are obtained using the improved ISGW II model. Consequently, branching ratios for the CKM-favored and CKM-suppressed decays are calculated.Comment: 32 pages, to be published in Phys. Rev.

Effect of Phosphate Group Addition on the Properties of Denture Base Resins

Statement of problem Acrylic resins are prone to microbial adherence, especially by Candida albicans. Surface-charged resins alter the ionic interaction between the denture resin and Candida hyphae, and these resins are being developed as a means to reduce microbial colonization on the denture surface. Purpose The purpose of this study was to investigate the physical and mechanical properties of phosphate-containing polymethyl methacrylate resins for their suitability as a denture material. Material and methods Using PMMA with cross-linker (Lucitone 199) as a control, 4 experimental groups containing various levels of phosphate with and without cross-linker were generated. The properties examined were impact strength, fracture toughness, wettability (contact angle), and resin bonding ability to denture teeth. Impact strength was tested in the Izod configuration (n=16), and fracture toughness (n=13) was measured using the single-edge notched bend test. Wettability was determined by calculating the contact angle of water on the material surface (n=12), while ISO 1567 was used for bonding ability (n=12). The data were analyzed by 1- and 2-way ANOVA (α=.05). Results A trend of increased hydrophilicity, as indicated by lower contact angle, was observed with increased concentrations of phosphate. With regard to the other properties, no significant differences were found when compared with the control acrylic resin. Conclusions No adverse physical effect due to the addition of a phosphate-containing monomer was found in the acrylic denture resins. Additional mechanical and physical properties, biocompatibility, and clinical efficacy studies are needed to confirm the in vivo anti-Candida activity of these novel resins

Branching ratios of Bc Meson Decaying to Pseudoscalar and Axial-Vector Mesons

We study Cabibbo-Kobayashi-Maskawa (CKM) favored weak decays of Bc mesons in the Isgur-Scora-Grinstein-Wise (ISGW) quark model. We present a detailed analysis of the Bc meson decaying to a pseudoscalar meson (P) and an axial-vector meson (A). We also give the form factors involving transition in the ISGW II framework and consequently, predict the branching ratios of decays.Comment: 19 pages,7 table

Dry-processing of long-term wet-stored fly ash for use as an addition in concrete

The paper describes a study carried out to explore the potential for recovery of fly ash from wet-storage areas for use as an addition in concrete, and involved drying and processing material to achieve finer fractions/reduce particle size. Three relatively coarse fly ashes with medium/high carbon contents (loss-on-ignition; LOI) were obtained from two UK lagoons and a stockpile. Initially, drying (105 °C) and screening (600 μm) were carried out, giving acceptable handling properties. Thereafter, processing using (63 μm) sieving, air classifying or grinding was investigated. The methods gave increased fineness levels (greatest with grinding), with some reductions in LOI also found after sieving and air classifying. Assessment of fly ash reactivity indicated improvements with processing, and most noticeable effects by grinding. Tests on concrete found that both consistence (slump) and compressive (cube) strength increased with processing and tended to follow fly ash fineness. Further analysis showed that strength could be related to the sub 10 μm particle level in fly ash. This appeared to be irrespective of processing method, with progressive increases (in strength) up to sub 10 μm contents of about 60% (maximum in the study). Concrete tests for water absorption and intrinsic (air) permeability, carbonation and chloride diffusion showed that these were also influenced by fly ash sub 10 μm content. The factors affecting behaviour are discussed and practical implications of the research considered.</p

NLO QCD Corrections to BcB_c-to-Charmonium Form Factors

The $B_c(^1S_0)$ meson to S-wave Charmonia transition form factors are calculated in next-to-leading order(NLO) accuracy of Quantum Chromodynamics(QCD). Our results indicate that the higher order corrections to these form factors are remarkable, and hence are important to the phenomenological study of the corresponding processes. For the convenience of comparison and use, the relevant expressions in asymptotic form at the limit of $m_c\rightarrow0$ for the radiative corrections are presented

Impact of fly ash content and fly ash transportation distance on embodied greenhouse gas emissions and water consumption in concrete

Background, aim and scope Fly ash, a by-product of coal-fired power stations, is substituted for Portland cement to improve the properties of concrete and reduce the embodied greenhouse gas (GHG) emissions. Much of the world's fly ash is currently disposed of as a waste product. While replacing some Portland cement with fly ash can reduce production costs and the embodied emissions of concrete, the relationship between fly ash content and embodied GHG emissions in concrete has not been quantified. The impact of fly ash content on embodied water is also unknown. Furthermore, it is not known whether a global trade in fly ash for use in concrete is feasible from a carbon balance perspective, or if transport over long distances would eliminate any CO(2) savings. This paper aims to quantify GHG emissions and water embodied in concrete (f'(c)= 32 MPa) as a function of fly ash content and to determine the critical fly ash transportation distance, beyond which use of fly ash in concrete increases embodied GHG emissions

Functional consequences of seven novel mutations in the CYP11B1 Gene: four mutations associated with nonclassic and three mutations causing classic 11 -Hydroxylase Deficiency

Context: Steroid 11β-hydroxylase (CYP11B1) deficiency (11OHD) is the second most common form of congenital adrenal hyperplasia (CAH). Cases of nonclassic 11OHD are rare compared with the incidence of nonclassic 21-hydroxylase deficiency. Objective: The aim of the study was to analyze the functional consequences of seven novel CYP11B1 mutations (p.M88I, p.W116G, p.P159L, p.A165D, p.K254_A259del, p.R366C, p.T401A) found in three patients with classic 11OHD, two patients with nonclassic 11OHD, and three heterozygous carriers for CYP11B1 mutations. Methods: We conducted functional studies employing a COS7 cell in vitro expression system comparing wild-type (WT) and mutant CYP11B1 activity. Mutants were examined in a computational three-dimensional model of the CYP11B1 protein. Results: All mutations (p.W116G, p.A165D, p.K254_A259del) found in patients with classic 11OHD have absent or very little 11β-hydroxylase activity relative to WT. The mutations detected in patients with nonclassic 11OHD showed partial functional impairment, with one patient being homozygous (p.P159L; 25% of WT) and the other patient compound heterozygous for a novel mild p.M88I (40% of WT) and the known severe p.R383Q mutation. The two mutations detected in heterozygous carriers (p.R366C, p.T401A) also reduced CYP11B1 activity by 23 to 37%, respectively. Conclusion: Functional analysis results allow for the classification of novel CYP11B1 mutations as causative for classic and nonclassic 11OHD, respectively. Four partially inactivating mutations are predicted to result in nonclassic 11OHD. These findings double the number of mild CYP11B1 mutations previously described as associated with mild 11OHD. Our data are important to predict phenotypic expression and provide important information for clinical and genetic counseling i

Homogeneous Bubble Nucleation driven by local hot spots: a Molecular Dynamics Study

We report a Molecular Dynamics study of homogenous bubble nucleation in a Lennard-Jones fluid. The rate of bubble nucleation is estimated using forward-flux sampling (FFS). We find that cavitation starts with compact bubbles rather than with ramified structures as had been suggested by Shen and Debenedetti (J. Chem. Phys. 111:3581, 1999). Our estimate of the bubble-nucleation rate is higher than predicted on the basis of Classical Nucleation Theory (CNT). Our simulations show that local temperature fluctuations correlate strongly with subsequent bubble formation - this mechanism is not taken into account in CNT