Serum interleukin 6 concentration in patients with pemphigus

Pemphigus is a rare autoimmune blistering disease that detrimentally affects the integumentary system and decreases patients’ quality of life. Recent studies have shown that interleukin 6 (IL-6) is closedly involved in the immunophathogenesis of pemphigus. Therefore, this study was performed to evaluate the role of IL-6 in the pathogenesis and severity of pemphigus disease. The case-series study was conducted in Ho Chi Minh City Hospital of Dermato-Venereology from January 2022 to August 2022, involving 26 patients with pemphigus vulgaris (PV), 4 patients with pemphigus foliaceus (PF), and 20 healthy volunteers. The serum IL-6 concentrations of patients with PV and PF were significantly higher than those of the healthy volunteers (P < 0.001). Serum IL-6 concentrations were significantly higher in patients with a positive than a negative Nikolsky sign (P < 0.001). A significant correlation was found between the serum IL-6 concentration and the pemphigus disease area index (r = 0.8, P < 0.001). Our results suggest that IL-6 may play an important role in the pathogenesis and severity of pemphigus. Therefore, new therapies targeting IL-6 may be a promising choice for treating pemphigus, especially in its severe forms

Influence of ASE Noise on Performance of DWDM Networks Using Low-power Pumped Raman Amplifiers

We present the results of investigation  for  influence of amplified spontaneous emission (ASE) noise, noise figure (NF) and  chromatic dispersion on the performance of middle-distance Dense-wavelength-division-multiplexing (DWDM) networks using low-power pumped distributed Raman amplifiers (DRAs) in two different pump configurations, i.e., forward and backward pumping. We found that the pumping configurations, ASE noise, and dispersion play an important role for improving network performance by decrease of noise figure and bit error rate (BER) of the system. Simulation results show that the lowest bit error rate and low noise figure were obtained, when using forward pumping configuration. Moreover, we have also compared ASE noise powers of the simulation with these of the experiment. These results conclude that DRA with low pump power  ($1$~W) is the promising key technology for short-- and/or middle-distance DWDM transmission networks

Synthesis of Heterostructured TiO₂ Nanopores/Nanotubes by Anodizing at High Voltages

This paper reports on the coating of heterostructured TiO2 nanopores/nanotubes on Ti substrates by anodizing at high voltages to design surfaces for biomedical implants. As the anodized voltage from 50 V to 350 V was applied, the microstructure of the coating shifted from regular TiO2 nanotubes to heterostructured TiO2 nanopores/nanotubes. In addition, the dimension of the heterostructured TiO2 nanopores/nanotubes was a function of voltage. The electrochemical characteristics of TiO2 nanotubes and heterostructured TiO2 nanopores/nanotubes were evaluated in simulated body fluid (SBF) solution. The creation of heterostructured TiO2 nanopores/nanotubes on Ti substrates resulted in a significant increase in BHK cell attachment compared to that of the Ti substrates and the TiO2 nanotubes

Effect of current density on the morphology and electrochemical properties of nanotubular TiO2 for implant applications

This study focuses on investigating the influence of current density (i) (A/dm ^2 ) at values of 0.5 A dm ^−2 , 1.0 A dm ^−2 1.5 A dm ^−2 , and 2.0 A/dm ^2 on the surface structure of nanotubular titanium dioxide (TiO _2 ) in an ethylene glycol solvent containing a certain amount of fluoride salt and water. The surface structure observed via FESEM images reveals that different current densities yield different nanotubular TiO _2 structures, predominantly in the form of anatase TiO _2 crystals. EIS and CV measurements indicate that at a current density of i = 1.5 A dm ^−2 , the nanotubular TiO _2 layer exhibits corrosion resistance performance up to 90.06% compared to the bare titanium (Ti) samples. Confocal laser scanning microscopy (CLSM) demonstrates enhanced attachment of BHK cells on anodized titanium surfaces compared to unmodified controls. These findings suggest that nanotubular TiO _2 presents a biocompatible material with promising potential for biomedical implant applications

Geographical origin identification of teas using UV-VIS spectroscopy

In this work we proposed a method to verify the differentiating characteristics of simple tea infusions prepared in boiling water alone, which represents the final product as ingested by the consumers. For this purpose, total of 125 tea samples from different geographical provines of Vietnam have been analyzed in UV-Vis spectroscopy associated with multivariate statistical methods. Principal Component Analysis-Discriminant Analysis (PCA-DA), Partial Least Squares Discriminant Analysis (PLS-DA) and Artificial Neural Network (ANN) were compared to construct the identification model. The experimental results showed that the performance of ANN model was better than PCA-DA and PLS-DA model. The optimal ANN model was achieved when neuron numbers were 200, identification rate being 99% in the training set and 84% predition set. The proposed methodology provides a simpler, faster and more affordable classification of simple tea infusions, and can be used as an alternative approach to traditional tea quality evaluation

The Efficacy of Intense Pulsed Light in the Treatment of Keloids and Hypertrophic Scars: Intense pulse light for keloids

Introduction: Different therapies have been applied to keloids and hypertrophic scars. Intense pulsed light (IPL) has recently been used but the evidence is limited. This study was to evaluate the effectiveness and safety of IPL as monotherapy for keloids and hypertrophic scars.Methods: This was a before-and-after interventional study on 16 patients with 50 scars who underwent IPL. Seven scars receive one IPL session, seven received two sessions, and 36 received three sessions. Outcomes were evaluated by the Vancouver Scar Scale (VSS), Patient and Observer Scar Assessment Scale (POSAS), scar ultrasound, colorimeter for pigmentation and erythema, and side effects.Results: After the treatment, most outcomes significantly improved except that the pigmentation of the scars did not change. Scar thickness significantly reduced by nearly 10% after the first IPL session, 15% after the second session, and&gt;20% after the third session. All side effects were mild with crust (33.3-46%), blisters (8.3-40%), and hyperpigmentation around the scar (0-14%); the pain was moderate as assessed by the patients.Conclusions: IPL is a safe and effective treatment for keloids and hypertrophic scars. More studiesare required to confirm our results

Synthesis of Up-Conversion CaTiO₃: Er³⁺ Films on Titanium by Anodization and Hydrothermal Method for Biomedical Applications

The present study investigates the effects of Er3+ doping content on the microstructure and up-conversion emission properties of CaTiO3: Er3+ phosphors as a potential material in biomedical applications. The CaTiO3: x%Er3+ (x = 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0%) films were synthesized on Ti substrates by a hydrothermal reaction at 200 °C for 24 h. The SEM image showed the formation of cubic nanorod CaTiO3: Er3+ films with a mean edge size value of (1–5) μm. When excited with 980 nm light, the CaTiO3: Er3+ films emitted a strong green band and a weak red band of Er3+ ions located at 543, 661, and 740 nm. The CaTiO3: Er3+ film exhibited excellent surface hydrophilicity with a contact angle of ~zero and good biocompatibility against baby hamster kidney (BHK) cells. CaTiO3: Er3+ films emerge as promising materials for different applications in the biomedical field

COVID-19 and Virtual Nutrition: A Pilot Study of Integrating Digital Food Models for Interactive Portion Size Education

Background and aims: Digital food viewing is a vital skill for connecting dieticians to e-health. The aim of this study was to integrate a novel pedagogical framework that combines interactive three- (3-D) and two-dimensional (2-D) food models into a formal dietetic training course. The level of agreement between the digital food models (first semester) and the effectiveness of educational integration of digital food models during the school closure due to coronavirus disease 2019 (COVID-19) (second semester) were evaluated. Method: In total, 65 second-year undergraduate dietetic students were enrolled in a nutritional practicum course at the School of Nutrition and Health Sciences, Taipei Medical University (Taipei, Taiwan). A 3-D food model was created using Agisoft Metashape. Students&rsquo; digital food viewing skills and receptiveness towards integrating digital food models were evaluated. Results: In the first semester, no statistical differences were observed between 2-D and 3-D food viewing skills in food identification (2-D: 89% vs. 3-D: 85%) and quantification (within &plusmn;10% difference in total calories) (2-D: 19.4% vs. 3-D: 19.3%). A Spearman correlation analysis showed moderate to strong correlations of estimated total calories (0.69~0.93; all p values &lt; 0.05) between the 3-D and 2-D models. Further analysis showed that students who struggled to master both 2-D and 3-D food viewing skills had lower estimation accuracies than those who did not (equal performers: 28% vs. unequal performers:16%, p = 0.041), and interactive 3-D models may help them perform better than 2-D models. In the second semester, the digital food viewing skills significantly improved (food identification: 91.5% and quantification: 42.9%) even for those students who struggled to perform digital food viewing skills equally in the first semester (equal performers: 44% vs. unequal performers: 40%). Conclusion: Although repeated training greatly enhanced students&rsquo; digital food viewing skills, a tailored training program may be needed to master 2-D and 3-D digital food viewing skills. Future study is needed to evaluate the effectiveness of digital food models for future &ldquo;eHealth&rdquo; care

Sulfur and lead isotope geochemical characteristics of Pb-Zn deposits in the Khau Loc zone, northeastern Vietnam, and their significance

In northeastern Vietnam, the Khau Loc zone is considered to have high potential for lead-zinc mineralization. The lead isotope data for 18 galena samples and 18 ones of δ34S isotope data (including galena and pyrite samples) were collected from lead-zinc ore deposits in some areas in the Khau Loc zone, including Phia Dam, Khuoi Man, Ban Lin, Lung Dam, and Ta Pan. These were employed to investigate the sulfur and lead isotope geochemical characteristics of Pb-Zn deposits and their significance in this study. The samples were analyzed using the LA-ICP-MS to show that the Pb isotopic ratios of 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb in the galena samples range from 17.8908 to 18.6012, 15.5794 to 16.1025, 38.4420 to 39.2118, with the average values of 18.296, 15.749, and 38.812, respectively. The pyrite and galena samples had the δ34S isotope, ranging from 9.0 to 15.106. The sulfur isotope systematics implies that most of the lead-zinc ore formations originated from marine sedimentary evaporation deposits and magmatic intrusion-volcanic eruption sources rich in silica. The distribution of lead isotopic ratios had a well-defined cluster for each deposit, indicating the formation of lead-zinc deposits and lower crust and orogen trends. In addition, these findings of lead isotopic ratios and δ 34S isotopes proved that the Khau Loc zone is an activated structure with continuous growth in continental crust thickness during the early Proterozoic and Cenozoic periods. Furthermore, the study results also presented the evolution of material sources involved in the formation of lead-zinc ores in the Khau Loc zone

Mosaicism in carrier of Duchenne muscular dystrophy mutation – Implication for prenatal diagnosis

Objective: Duchenne muscular dystrophy (DMD) is a severe disorder caused by mutation in the X-linked dystrophin gene, therefor carrier testing is required for all female family members. However, there are cases mutation analysis cannot detect any mutation due to a phenomenon called mosaicism. The case report describes a case of mosaicism in a DMD carrier and discusses the approach in diagnosis and counseling of familial disorder. Case report: The proband was diagnosed with DMD at age six. Sequencing of Dystrophin gene identified a 2-nucleotide deletion c.2032_2033delCA, p.Q678DfsX41. Family investigation suggested that the mother was an obligate carrier of Dystrophin mutation. Sequencing of DNA sample from the mother's peripheral blood did not reveal any mutation, there for we take sample from hair follicle for analysis. The result indicated that the mother was a carrier but was masked from initial analysis by mosaicsism. Conclusion: We suggested that more care need to be taken in identifying cases when no mutation was detected in probable or obligate carrier and prenatal diagnosis should remain an option. Keywords: Duchenne muscular dystrophy, Dystrophin, Mosaicism, Counseling, Prenatal diagnosi