2,287 research outputs found
On Modeling Geometric Joint Sink Mobility with Delay-Tolerant Cluster-less Wireless Sensor Networks
Moving Sink (MS) in Wireless Sensor Networks (WSNs) has appeared as a
blessing because it collects data directly from the nodes where the concept of
relay nodes is becomes obsolete. There are, however, a few challenges to be
taken care of, like data delay tolerance and trajectory of MS which is NP-hard.
In our proposed scheme, we divide the square field in small squares. Middle
point of the partitioned area is the sojourn location of the sink, and nodes
around MS are in its transmission range, which send directly the sensed data in
a delay-tolerant fashion. Two sinks are moving simultaneously; one inside and
having four sojourn locations and other in outer trajectory having twelve
sojourn locations. Introduction of the joint mobility enhances network life and
ultimately throughput. As the MS comes under the NP-hard problem, we convert it
into a geometric problem and define it as, Geometric Sink Movement (GSM). A set
of linear programming equations has also been given in support of GSM which
prolongs network life time
Density Controlled Divide-and-Rule Scheme for Energy Efficient Routing in Wireless Sensor Networks
Cluster based routing technique is most popular routing technique in Wireless
Sensor Networks (WSNs). Due to varying need of WSN applications efficient
energy utilization in routing protocols is still a potential area of research.
In this research work we introduced a new energy efficient cluster based
routing technique. In this technique we tried to overcome the problem of
coverage hole and energy hole. In our technique we controlled these problems by
introducing density controlled uniform distribution of nodes and fixing optimum
number of Cluster Heads (CHs) in each round. Finally we verified our technique
by experimental results of MATLAB simulations.Comment: 26th IEEE Canadian Conference on Electrical and Computer Engineering
(CCECE2013), Regina, Saskatchewan, Canada, 201
On Energy Efficiency and Delay Minimization in Reactive Protocols in Wireless Multi-hop Networks
In Wireless Multi-hop Networks (WMhNs), routing protocols with energy
efficient and delay reduction techniques are needed to fulfill users demands.
In this paper, we present Linear Programming models (LP_models) to assess and
enhance reactive routing protocols. To practically examine constraints of
respective LP_models over reactive protocols, we select AODV, DSR and DYMO. It
is deduced from analytical simulations of LP_models in MATLAB that quick route
repair reduces routing latency and optimizations of retransmission attempts
results efficient energy utilization. To provide quick repair, we enhance AODV
and DSR. To practically examine the efficiency of enhanced protocols in
different scenarios of WMhNs, we conduct simulations using NS- 2. From
simulation results, enhanced DSR and AODV achieve efficient output by
optimizing routing latencies and routing load in terms of retransmission
attempts
Intelligent agent for formal modelling of temporal multi-agent systems
Software systems are becoming complex and dynamic with the passage of time, and to provide better fault tolerance and resource management they need to have the ability of self-adaptation. Multi-agent systems paradigm is an active area of research for modeling real-time systems. In this research, we have proposed a new agent named SA-ARTIS-agent, which is designed to work in hard real-time temporal constraints with the ability of self-adaptation. This agent can be used for the formal modeling of any self-adaptive real-time multi-agent system. Our agent integrates the MAPE-K feedback loop with ARTIS agent for the provision of self-adaptation. For an unambiguous description, we formally specify our SA-ARTIS-agent using Time-Communicating Object-Z (TCOZ) language. The objective of this research is to provide an intelligent agent with self-adaptive abilities for the execution of tasks with temporal constraints. Previous works in this domain have used Z language which is not expressive to model the distributed communication process of agents. The novelty of our work is that we specified the non-terminating behavior of agents using active class concept of TCOZ and expressed the distributed communication among agents. For communication between active entities, channel communication mechanism of TCOZ is utilized. We demonstrate the effectiveness of the proposed agent using a real-time case study of traffic monitoring system
EAST: Energy Efficient Adaptive Scheme for Transmission in Wireless Sensor Networks
In this paper, we propose Energy-efficient Adaptive Scheme for Transmission
(EAST) in WSNs. EAST is IEEE 802.15.4 standard compliant. In this approach,
open-loop is used for temperature-aware link quality estimation and
compensation. Whereas, closed-loop feedback helps to divide network into three
logical regions to minimize overhead of control packets on basis of Threshold
transmitter power loss (RSSIloss) for each region and current number of
neighbor nodes that help to adapt transmit power according to link quality
changes due to temperature variation. Simulation results show that propose
scheme; EAST effectively adapts transmission power to changing link quality
with less control packets overhead and energy consumption compared to classical
approach with single region in which maximum transmitter power assigned to
compensate temperature variation
Toward a scalable and consistent manufacturing process for the production of human MSCs
The development of novel, affordable and efficacious therapeutics will be necessary to ensure the continued progression in the standard of global healthcare. With the potential to address previously unmet patient needs as well as tackling the social and economic effects of chronic and age-related conditions, cell therapies will lead the new generation of healthcare products set to improve health and wealth across the globe. However, if many of the small to medium enterprises (SMEs) engaged in much of the commercialization efforts are to successfully traverse the ‘Valley of Death’ as they progress through clinical trials, there are a number of challenges that must be overcome. No longer do the challenges remain biological but rather a series of engineering and manufacturing issues must also be considered and addressed
- …