46,623 research outputs found

    Cooling of High Pressure Rocket Thrust Chambers with Liquid Oxygen

    Get PDF
    An experimental program using hydrogen and oxygen as the propellants and supercritical liquid oxygen (LOX) as the coolant was conducted at 4.14 and 8.274 MN/square meters (600 and 1200 psia) chamber pressure. Data on the following are presented: the effect of LOX leaking into the combustion region through small cracks in the chamber wall; and verification of the supercritical oxygen heat transfer correlation developed from heated tube experiments; A total of four thrust chambers with throat diameters of 0.066 m were tested. Of these, three were cyclically tested to 4.14 MN/square meters (600 psia) chamber pressure until a crack developed. One had 23 additional hot cycles accumulated with no apparent metal burning or distress. The fourth chamber was operated at 8.274 MN/square meters (1200 psia) pressure to obtain steady state heat transfer data. Wall temperature measurements confirmed the heat transfer correlation

    Proven, long-life hydrogen/oxygen thrust chambers for space station propulsion

    Get PDF
    The development of the manned space station has necessitated the development of technology related to an onboard auxiliary propulsion system (APS) required to provide for various space station attitude control, orbit positioning, and docking maneuvers. A key component of this onboard APS is the thrust chamber design. To develop the required thrust chamber technology to support the Space Station Program, the NASA Lewis Research Center has sponsored development programs under contracts with Aerojet TechSystems Company and with Bell Aerospace Textron Division of Textron, Inc. During the NASA Lewis sponsored program with Aerojet TechSystems, a 25 lb sub f hydrogen/oxygen thruster has been developed and proven as a viable candidate to meet the needs of the Space Station Program. Likewise, during the development program with Bell Aerospace, a 50 lb sub f hydrogen/oxygen Thrust Chamber has been developed and has demonstrated reliable, long-life expectancy at anticipated space station operating conditions. Both these thrust chambers were based on design criteria developed in previous thruster programs and successfully verified in experimental test programs. Extensive thermal analyses and models were used to design the thrusters to achieve total impulse goals of 2 x 10 to the 6th power lb sub f-sec. Test data for each thruster will be compared to the analytical predictions for the performance and heat transfer characteristics. Also, the results of thrust chamber life verification tests will be presented

    Attitude sensor

    Get PDF
    A device for controlling the attitude of a spacecraft is described. The device consists of two light sensors on a spacecraft that are mounted beneath a baffle which divides the light from a light source such as the sun or a star. The divided light reflects off of two reflective surfaces onto the two light sensors. When the spacecraft assumes its normal attitude, the baffle divides the light source into two equal parts, causing the two light sensors to produce equal outputs. When the light is equally detected, the stabilizing system is disconnected. Deviations from the normal attitude cause unequal distribution of the light source and energize the stabilizing system

    Burden of podoconiosis in poor rural communities in Guliso woreda, western Ethiopia

    Get PDF
    Background. Podoconiosis is an environmental lymphoedema affecting people living and working barefoot on irritant red clay soil. Podoconiosis is relatively well described in southern Ethiopia, but remains neglected in other parts of the Ethiopian highlands. This study aimed to assess the burden of podoconiosis in rural communities in western Ethiopia. Methodology/Principal Findings. A cross-sectional study was conducted in Gulliso woreda (district), west Ethiopia. A household survey in the 26 rural kebeles (villages) of this district was conducted to identify podoconiosis patients and to measure disease prevalence. A more detailed study was done in six randomly selected kebeles to describe clinical features of the disease, patients’ experiences of foot hygiene, and shoe wearing practice. 1,935 cases of podoconiosis were registered, giving a prevalence of 2.8%. The prevalence was higher in those aged 15 – 64 years (5.2%) and in females than males (prevalence ratio 2.6:1). 90.3% of patients were in the 15 – 64 year age group. In the detailed study, 335 cases were interviewed and their feet assessed. The majority of patients were farmers, uneducated, and poor. Two-third of patients developed the disease before the age of thirty. Almost all patients (97.0%) had experienced adenolymphangitis (ALA - red, hot legs, swollen and painful groin) at least once during the previous year. Patients experienced an average of 5.5 ALA episodes annually, each of average 4.4 days, thus 24 working days were lost annually. The incidence of ALA in podoconiosis patients was higher than that reported for filariasis in other countries. Shoe wearing was limited mainly due to financial problems. Conclusions. We have documented high podoconiosis prevalence, frequent adenolymphangitis and high disease-related morbidity in west Ethiopia. Interventions must be developed to prevent, treat and control podoconiosis, one of the core neglected tropical diseases in Ethiopia

    Complementary approaches to the ab initio calculation of melting properties

    Full text link
    Several research groups have recently reported {\em ab initio} calculations of the melting properties of metals based on density functional theory, but there have been unexpectedly large disagreements between results obtained by different approaches. We analyze the relations between the two main approaches, based on calculation of the free energies of solid and liquid and on direct simulation of the two coexisting phases. Although both approaches rely on the use of classical reference systems consisting of parameterized empirical interaction models, we point out that in the free energy approach the final results are independent of the reference system, whereas in the current form of the coexistence approach they depend on it. We present a scheme for correcting the predictions of the coexistence approach for differences between the reference and {\em ab initio} systems. To illustrate the practical operation of the scheme, we present calculations of the high-pressure melting properties of iron using the corrected coexistence approach, which agree closely with earlier results from the free energy approach. A quantitative assessment is also given of finite-size errors, which we show can be reduced to a negligible size.Comment: 14 pages, two figure

    A quantum key distribution protocol for rapid denial of service detection

    Get PDF
    We introduce a quantum key distribution protocol designed to expose fake users that connect to Alice or Bob for the purpose of monopolising the link and denying service. It inherently resists attempts to exhaust Alice and Bob's initial shared secret, and is 100% efficient, regardless of the number of qubits exchanged above the finite key limit. Additionally, secure key can be generated from two-photon pulses, without having to make any extra modifications. This is made possible by relaxing the security of BB84 to that of the quantum-safe block cipher used for day-to-day encryption, meaning the overall security remains unaffected for useful real-world cryptosystems such as AES-GCM being keyed with quantum devices.Comment: 13 pages, 3 figures. v2: Shifted focus of paper towards DoS and added protocol 4. v1: Accepted to QCrypt 201

    Ab-initio chemical potentials of solid and liquid solutions and the chemistry of the Earth's core

    Full text link
    A general set of methods is presented for calculating chemical potentials in solid and liquid mixtures using {\em ab initio} techniques based on density functional theory (DFT). The methods are designed to give an {\em ab initio} approach to treating chemical equilibrium between coexisting solid and liquid solutions, and particularly the partitioning ratio of solutes between such solutions. For the liquid phase, the methods are based on the general technique of thermodynamic integration, applied to calculate the change of free energy associated with the continuous interconversion of solvent and solute atoms, the required thermal averages being computed by DFT molecular dynamics simulation. For the solid phase, free energies and hence chemical potentials are obtained using DFT calculation of vibrational frequencies of systems containing substitutional solute atoms, with anharmonic contributions calculated, where needed, by thermodynamic integration. The practical use of the methods is illustrated by applying them to study chemical equilibrium between the outer liquid and inner solid parts of the Earth's core, modelled as solutions of S, Si and O in Fe. The calculations place strong constraints on the chemical composition of the core, and allow an estimate of the temperature at the inner-core/outer-core boundary.Comment: 19 pages, two figure
    • …
    corecore