442 research outputs found
A normalisation procedure for biaxial bias extension tests
Biaxial Bias Extension tests have been performed on a plain-weave carbon fibre engineering fabric. The test results have been normalised using both the upper and lower bound method proposed by Potluri et al. and also using a novel alternative normalisation method based on energy arguments. The normalised results from both methods are compared and discussed
Compression properties of polymeric syntactic foam composites under cyclic loading
Syntactic foams are composite materials frequently used in applications
requiring the properties of low density and high damage tolerance. In the
present work, polymer-based syntactic foams were studied under cyclic
compression in order to investigate their compressibility, recoverability,
energy dissipation and damage tolerance. These syntactic foams were
manufactured by adding hollow polymer microspheres of various sizes and wall
thicknesses into a polyurethane matrix. The associated loading and unloading
curves during cyclic testing were recorded, revealing the viscoelastic nature
of the materials. SEM images of the samples were obtained in order to study
potential damage mechanisms during compression. It was observed that these
syntactic foams exhibit high elastic recovery and energy dissipation over a
wide range of compressional strains and the addition of polymer microspheres
mitigate the damage under compressional loading.Comment: 25 pages, 13 figure
mtDNA lineage analysis of mouse L-cell lines reveals the accumulation of multiple mtDNA mutants and intermolecular recombination
The role of mitochondrial DNA (mtDNA) mutations and mtDNA recombination in cancer cell proliferation and developmental biology remains controversial. While analyzing the mtDNAs of several mouse L cell lines, we discovered that every cell line harbored multiple mtDNA mutants. These included four missense mutations, two frameshift mutations, and one tRNA homopolymer expansion. The LA9 cell lines lacked wild-type mtDNAs but harbored a heteroplasmic mixture of mtDNAs, each with a different combination of these variants. We isolated each of the mtDNAs in a separate cybrid cell line. This permitted determination of the linkage phase of each mtDNA and its physiological characteristics. All of the polypeptide mutations inhibited their oxidative phosphorylation (OXPHOS) complexes. However, they also increased mitochondrial reactive oxygen species (ROS) production, and the level of ROS production was proportional to the cellular proliferation rate. By comparing the mtDNA haplotypes of the different cell lines, we were able to reconstruct the mtDNA mutational history of the L-L929 cell line. This revealed that every heteroplasmic L-cell line harbored a mtDNA that had been generated by intracellular mtDNA homologous recombination. Therefore, deleterious mtDNA mutations that increase ROS production can provide a proliferative advantage to cancer or stem cells, and optimal combinations of mutant loci can be generated through recombination
Forming low-cost, high quality carbon tows for automotive application.
Carbon fiber reinforced composites are widely used in many industries due to their high performance. Its application in the aerospace industry has increased significantly, however, in mass produced automobile sector it is still limited. The current production of carbon fiber tow is slow and capital intensive. Thus, carbon manufactures produce higher tow counts to increase production rate to reduce its cost. In order to offset the higher cost of carbon fiber composite, an innovative and unique approach has been developed. The higher tow count carbon spools are split into smaller tow counts. Due to the delicate nature of carbon fiber, it is important to control the filamentation during that process. Different splitting process line strategies have been developed in this research work for understanding the process limitations and challenges involved. The process was made feasible for production by developing a fully automated process line with a laser feedback system. The system splits a 12K spool into two 6K tows. The quality of the 6K split tows has been determined statistically by recording real time data from the laser during the splitting process. It was demonstrated that the proposed process effectively controls filamentation and produces consistent tow quality.Company research funding by Bentley Motors Limite
An Intrusion Detection Using Machine Learning Algorithm Multi-Layer Perceptron (MlP): A Classification Enhancement in Wireless Sensor Network (WSN)
During several decades, there has been a meteoric rise in the development and use of cutting-edge technology. The Wireless Sensor Network (WSN) is a groundbreaking innovation that relies on a vast network of individual sensor nodes. The sensor nodes in the network are responsible for collecting data and uploading it to the cloud. When networks with little resources are deployed harshly and without regulation, security risks occur. Since the rate at which new information is being generated is increasing at an exponential rate, WSN communication has become the most challenging and complex aspect of the field. Therefore, WSNs are insecure because of this. With so much riding on WSN applications, accuracy in replies is paramount. Technology that can swiftly and continually analyse internet data streams is essential for spotting breaches and assaults. Without categorization, it is hard to simultaneously reduce processing time while maintaining a high level of detection accuracy. This paper proposed using a Multi-Layer Perceptron (MLP) to enhance the classification accuracy of a system. The proposed method utilises a feed-forward ANN model to generate a mapping for the training and testing datasets using backpropagation. Experiments are performed to determine how well the proposed MLP works. Then, the results are compared to those obtained by using the Hoeffding adaptive tree method and the Restricted Boltzmann Machine-based Clustered-Introduction Detection System. The proposed MLP achieves 98% accuracy, which is higher than the 96.33% achieved by the RBMC-IDS and the 97% accuracy achieved by the Hoeffding adaptive tree
Hospital admission with non-alcoholic fatty liver disease is associated with increased all-cause mortality independent of cardiovascular risk factors
Non-alcoholic fatty liver disease (NAFLD) is common and strongly associated with the metabolic syndrome. Though NAFLD may progress to end-stage liver disease, the top cause of mortality in NAFLD is cardiovascular disease (CVD). Most of the data on liver-related mortality in NAFLD derives from specialist liver centres. It is not clear if the higher reported mortality rates in individuals with non-cirrhotic NAFLD are entirely accounted for by complications of atherosclerosis and diabetes. Therefore, we aimed to describe the CVD burden and mortality in NAFLD when adjusting for metabolic risk factors using a ‘real world’ cohort. We performed a retrospective study of patients followed-up after an admission to non-specialist hospitals with a NAFLD-spectrum diagnosis. Non-cirrhotic NAFLD and NAFLD-cirrhosis patients were defined by ICD-10 codes. Cases were age-/sex-matched with non-NAFLD hospitalised patients. All-cause mortality over 14-years follow-up after discharge was compared between groups using Cox proportional hazard models adjusted for demographics, CVD, and metabolic syndrome components. We identified 1,802 patients with NAFLD-diagnoses: 1,091 with non-cirrhotic NAFLD and 711 with NAFLD-cirrhosis, matched to 24,737 controls. There was an increasing burden of CVD with progression of NAFLD: for congestive heart failure 3.5% control, 4.2% non-cirrhotic NAFLD, 6.6% NAFLD-cirrhosis; and for atrial fibrillation 4.7% control, 5.9% non-cirrhotic NAFLD, 12.1% NAFLD-cirrhosis. Over 14-years follow-up, crude mortality rates were 14.7% control, 13.7% non-cirrhotic NAFLD, and 40.5% NAFLD-cirrhosis. However, after adjusting for demographics, non-cirrhotic NAFLD (HR 1.3 (95% CI 1.1–1.5)) as well as NAFLD-cirrhosis (HR 3.7 (95% CI 3.0–4.5)) patients had higher mortality compared to controls. These differences remained after adjusting for CVD and metabolic syndrome components: non-cirrhotic NAFLD (HR 1.2 (95% CI 1.0–1.4)) and NAFLD-cirrhosis (HR 3.4 (95% CI 2.8–4.2)). In conclusion, from a large non-specialist registry of hospitalised patients, those with non-cirrhotic NAFLD had increased overall mortality compared to controls even after adjusting for CVD
Derivatives of a benzoquinone acyl hydrazone with activity against Toxoplasma gondii
Toxoplasma gondii is an obligate intracellular parasite with global incidence. The acute infection, toxoplasmosis, is treatable but current regimens have poor host tolerance and no cure has been found for latent infections. This work builds upon a previous high throughput screen which identified benzoquinone acyl hydrazone (KG8) as the most promising compound; KG8 displayed potent in vitro activity against T. gondii but only marginal in vivoefficacy in a T. gondii animal model. To define the potential of this new lead compound, we now describe a baseline structure-activity relationship for this chemotype. Several derivatives displayed IC50\u27s comparable to that of the control treatment pyrimethamine with little to no cytotoxicity. The best of these, KGW44 and KGW59, had higher metabolic stability than KG8. In an in vivo T. gondii murine model, KGW59 significantly increased survivorship. This work provides new insights for optimization of this novel chemotype
Pharmacological inhibition of RAS overcomes FLT3 inhibitor resistance in FLT3-ITD+ AML through AP-1 and RUNX1
\ua9 2024 The Author(s). AML is characterized by mutations in genes associated with growth regulation such as internal tandem duplications (ITD) in the receptor kinase FLT3. Inhibitors targeting FLT3 (FLT3i) are being used to treat patients with FLT3-ITD+ but most relapse and become resistant. To elucidate the resistance mechanism, we compared the gene regulatory networks (GRNs) of leukemic cells from patients before and after relapse, which revealed that the GRNs of drug-responsive patients were altered by rewiring their AP-1-RUNX1 axis. Moreover, FLT3i induces the upregulation of signaling genes, and we show that multiple cytokines, including interleukin-3 (IL-3), can overcome FLT3 inhibition and send cells back into cycle. FLT3i leads to loss of AP-1 and RUNX1 chromatin binding, which is counteracted by IL-3. However, cytokine-mediated drug resistance can be overcome by a pan-RAS inhibitor. We show that cytokines instruct AML growth via the transcriptional regulators AP-1 and RUNX1 and that pan-RAS drugs bypass this barrier
TERT promoter mutation and aberrant hypermethylation are associated with elevated expression in medulloblastoma and characterise the majority of non-infant SHH subgroup tumours.
Numerical and Experimental Investigation of the Hydrostatic Performance of Fibre Reinforced Tubes
- …