High-Q trenched aluminum coplanar resonators with an ultrasonic edge microcutting for superconducting quantum devices

Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. The impact of materials and fabrication steps on dielectric losses can be evaluated using coplanar waveguide (CPW) microwave resonators. Here, we report on superconducting CPW microwave resonators with internal quality factors systematically exceeding 5x106 at high powers and 2x106 (with the best value of 4.4x106) at low power. Such performance is demonstrated for 100-nm-thick aluminum resonators with 7-10.5 um center trace on high-resistivity silicon substrates commonly used in quantum Josephson junction circuits. We investigate internal quality factors of the resonators with both dry and wet aluminum etching, as well as deep and isotropic reactive ion etching of silicon substrate. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed. Finally, we demonstrate the effect of airbridges positions and extra process steps on the overall dielectric losses. The best quality fa ctors are obtained for the wet etched aluminum resonators and isotropically removed substrate with the proposed ultrasonic metal edge microcutting.Comment: 6 pages, 2 figure

THE BEAM ENVELOPE CONTROL IN SC LINAC FOR THE PROTON RADIOTHERAPY

Abstract Proton cancer therapy is conventionally based on normal conducting synchrotrons and cyclotrons. The high electrical power consumption and especial devices necessary to energy variation are main problems of such facilities. Superconducting linacs based on short identical independently phased cavities have a seriously progress and it's development allow to propose their using for medical application. High accelerating gradient and small capacity losses nearly 10 -4 W/m are main advantages in advance of normal conducting facilities, the energy variation can be realized by means of RF field amplitude and phase variation in a number of cavities. Besides linac structures are lack of unwieldy magnetic system, simplicity of input and output of particles and high current densities. The parameters choose and the optimization for SC linac structure with energy up to 240 MeV and envelope control will discuss in this paper. The simulation was done using BEAMDULAC-SCL cod

Robust cryogenic matched low-pass coaxial filters for quantum computing applications

Electromagnetic noise is one of the key external factors decreasing superconducting qubits coherence. Matched coaxial filters can prevent microwave and IR photons negative influence on superconducting quantum circuits. Here, we report on design and fabrication route of matched low-pass coaxial filters for noise-sensitive measurements at milliKelvin temperatures. A robust transmission coefficient with designed linear absorption (-1dB/GHz) and ultralow reflection losses less than -20 dB up to 20 GHz is achieved. We present a mathematical model for evaluating and predicting filters transmission parameters depending on their dimensions. It is experimentally approved on two filters prototypes different lengths with compound of Cu powder and Stycast commercial resin demonstrating excellent matching. The presented design and assembly route are universal for various compounds and provide high repeatability of geometrical and microwave characteristics. Finally, we demonstrate three filters with almost equal reflection and transmission characteristics in the range from 0 to 20 GHz, which is quite useful to control multiple channel superconducting quantum circuits.Comment: 5 pages, 4 figure

Broadband SNAIL parametric amplifier with microstrip impedance transformer

Josephson parametric amplifiers have emerged as a promising platform for quantum information processing and squeezed quantum states generation. Travelling wave and impedance-matched parametric amplifiers provide broad bandwidth for high-fidelity single-shot readout of multiple qubit superconducting circuits. Here, we present a quantum-limited 3-wave-mixing parametric amplifier based on superconducting nonlinear asymmetric inductive elements (SNAILs), whose useful bandwidth is enhanced with an on-chip two-section impedance-matching circuit based on microstrip transmission lines. The amplifier dynamic range is increased using an array of sixty-seven SNAILs with 268 Josephson junctions, forming a nonlinear quarter-wave resonator. Operating in a current-pumped mode, we experimentally demonstrate an average gain of $17 dB$ across $300 MHz$ bandwidth, along with an average saturation power of $- 100 dBm$, which can go as high as $- 97 dBm$ with quantum-limited noise performance. Moreover, the amplifier can be fabricated using a simple technology with just a one e-beam lithography step. Its central frequency is tuned over a several hundred megahertz, which in turn broadens the effective operational bandwidth to around $1.5 GHz$.Comment: 7 pages, 3 figure

STATUS OF ITEP DECABORANE ION SOURCE PROGRAM.

The joint research and development program is continued to develop steady-state ion source of decaborane beam for ion implantation industry. Both Freeman and Bemas ion sources for decaborane ion beam generation were investigated. Decaborane negative ion beam as well as positive ion beam were generated and delivered to the output of mass separator. Experimental results obtained in ITEP are presented

Ion Sources for Energy Extremes of Ion Implantation.

For the past four years a joint research and development effort designed to develop steady state, intense ion sources has been in progress with the ultimate goal to develop ion sources and techniques, which meet the two energy extreme range needs of mega-electron-volt and 100's of electron-volt ion implanters. This endeavor has already resulted in record steady state output currents of high charge state of Antimony and Phosphorous ions: P{sup 2+} (8.6 pmA), P{sup 3+} (1.9 pmA), and P{sup 4+} (0.12 pmA) and 16.2, 7.6, 3.3, and 2.2 pmA of Sb{sup 3+} Sb{sup 4+}, Sb{sup 5+}, and Sb{sup 6+} respectively. For low energy ion implantation our efforts involve molecular ions and a novel plasmaless/gasless deceleration method. To date, 1 emA of positive Decaborane ions were extracted at 10 keV and smaller currents of negative Decaborane ions were also extracted. Additionally, Boron current fraction of over 70% was extracted from a Bemas-Calutron ion source, which represents a factor of 3.5 improvement over currently employed ion sources

Search for WHWH associated production in ppˉp \bar{p} collisions at s=1.96 TeV\sqrt{s}=1.96\,{\rm TeV}

This report describes a search for associated production of $W$ and Higgs bosons based on data corresponding to an integrated luminosity of $\cal{L}$$\approx 5.3 \rm fb^{-1}$ collected with the D0 detector at the Fermilab Tevatron $p\bar{p}$ Collider. Events containing a $W\rightarrow \ell \nu$ candidate (with $\ell$ corresponding to $e$ or $\mu$) are selected in association with two or three reconstructed jets. One or two of the jets are required to be consistent with having evolved from a $b$ quark. A multivariate discriminant technique is used to improve the separation of signal and backgrounds. Expected and observed upper limits are obtained for the product of the $WH$ production cross section and branching ratios and reported in terms of ratios relative to the prediction of the standard model as a function of the mass of the Higgs boson ($M_{H}$). The observed and expected 95% C.L. upper limits obtained for an assumed $M_{H}=115 \rm GeV$ are, respectively, factors of 4.5 and 4.8 larger than the value predicted by the standard model.Comment: 25 pages, 14 figure

A search for charged massive long-lived particles

We report on a search for charged massive long-lived particles (CMLLPs), based on 5.2 fb$^{-1}$ of integrated luminosity collected with the D0 detector at the Fermilab Tevatron $p\bar{p}$ collider. We search for events in which one or more particles are reconstructed as muons but have speed and ionization energy loss $(dE/dx)$ inconsistent with muons produced in beam collisions. CMLLPs are predicted in several theories of physics beyond the standard model. We exclude pair-produced long-lived gaugino-like charginos below 267 GeV and higgsino-like charginos below 217 GeV at 95% C.L., as well as long-lived scalar top quarks with mass below 285 GeV.Comment: submitted to Phys. Rev. Letter

Precise measurement of the top quark mass in the dilepton channel at D0

We measure the top quark mass (mt) in ppbar collisions at a center of mass energy of 1.96 TeV using dilepton ttbar->W+bW-bbar->l+nubl-nubarbbar events, where l denotes an electron, a muon, or a tau that decays leptonically. The data correspond to an integrated luminosity of 5.4 fb-1 collected with the D0 detector at the Fermilab Tevatron Collider. We obtain mt = 174.0 +- 1.8(stat) +- 2.4(syst) GeV, which is in agreement with the current world average mt = 173.3 +- 1.1 GeV. This is currently the most precise measurement of mt in the dilepton channel.Comment: 7 pages, 4 figure