60 research outputs found
Negative Smad Expression and Regulation in the Developing Chick Limb
The inhibitory or negative Smads, Smad6 and Smad7, block TGFβ superfamily signals of both the BMP and TGFβ classes by antagonizing the intracellular signal transduction machinery. We report the cloning of one Smad6 and two Smad7 (Smad7a and Smad7b) chick homologs and their expression and regulation in the developing limb. Smad6 and Smad7a are expressed in dynamic patterns reflecting the domains of BMP gene expression in the limb. Activation and inhibition of the BMP signaling pathway in limb mesenchyme indicates that negative Smad gene expression is regulated, at least in part, by BMP family signals
Heparan sulfate as a regulator of inflammation and immunity
Heparan sulfate is found on the surface of most cell types, as well as in basement membranes and extracellular matrices. Its strong anionic properties and highly variable structure enable this glycosaminoglycan to provide binding sites for numerous protein ligands, including many soluble mediators of the immune system, and may promote or inhibit their activity. The formation of ligand binding sites on heparan sulfate (HS) occurs in a tissue- and context-specific fashion through the action of several families of enzymes, most of which have multiple isoforms with subtly different specificities. Changes in the expression levels of these biosynthetic enzymes occur in response to inflammatory stimuli, resulting in structurally different HS and acquisition or loss of binding sites for immune mediators. In this review, we discuss the multiple roles for HS in regulating immune responses, and the evidence for inflammation-associated changes to HS structure
The BMP Antagonist Follistatin-Like 1 Is Required for Skeletal and Lung Organogenesis
Follistatin-like 1 (Fstl1) is a secreted protein of the BMP inhibitor class. During development, expression of Fstl1 is already found in cleavage stage embryos and becomes gradually restricted to mesenchymal elements of most organs during subsequent development. Knock down experiments in chicken and zebrafish demonstrated a role as a BMP antagonist in early development. To investigate the role of Fstl1 during mouse development, a conditional Fstl1 KO allele as well as a Fstl1-GFP reporter mouse were created. KO mice die at birth from respiratory distress and show multiple defects in lung development. Also, skeletal development is affected. Endochondral bone development, limb patterning as well as patterning of the axial skeleton are perturbed in the absence of Fstl1. Taken together, these observations show that Fstl1 is a crucial regulator in BMP signalling during mouse development
Bare Bones Pattern Formation: A Core Regulatory Network in Varying Geometries Reproduces Major Features of Vertebrate Limb Development and Evolution
BACKGROUND: Major unresolved questions regarding vertebrate limb development concern how the numbers of skeletal elements along the proximodistal (P-D) and anteroposterior (A-P) axes are determined and how the shape of a growing limb affects skeletal element formation. There is currently no generally accepted model for these patterning processes, but recent work on cartilage development (chondrogenesis) indicates that precartilage tissue self-organizes into nodular patterns by cell-molecular circuitry with local auto-activating and lateral inhibitory (LALI) properties. This process is played out in the developing limb in the context of a gradient of fibroblast growth factor (FGF) emanating from the apical ectodermal ridge (AER). RESULTS: We have simulated the behavior of the core chondrogenic mechanism of the developing limb in the presence of an FGF gradient using a novel computational environment that permits simulation of LALI systems in domains of varying shape and size. The model predicts the normal proximodistal pattern of skeletogenesis as well as distal truncations resulting from AER removal. Modifications of the model's parameters corresponding to plausible effects of Hox proteins and formins, and of the reshaping of the model limb, bud yielded simulated phenotypes resembling mutational and experimental variants of the limb. Hypothetical developmental scenarios reproduce skeletal morphologies with features of fossil limbs. CONCLUSIONS: The limb chondrogenic regulatory system operating in the presence of a gradient has an inherent, robust propensity to form limb-like skeletal structures. The bare bones framework can accommodate ancillary gene regulatory networks controlling limb bud shaping and establishment of Hox expression domains. This mechanism accounts for major features of the normal limb pattern and, under variant geometries and different parameter values, those of experimentally manipulated, genetically aberrant and evolutionary early forms, with no requirement for an independent system of positional information
Transforming growth factor beta signaling: The master sculptor of fingers
Transforming growth factor beta (TGF?) constitutes a large and evolutionarily conserved superfamily of secreted factors that play essential roles in embryonic development, cancer, tissue regeneration, and human degenerative pathology. Studies of this signaling cascade in the regulation of cellular and tissue changes in the three-dimensional context of a developing embryo have notably advanced in the understanding of the action mechanism of these growth factors. In this review, we address the role of TGF? signaling in the developing limb, focusing on its essential function in the morphogenesis of the autopod. As we discuss in this work, modern mouse genetic experiments together with more classical embryological approaches in chick embryos, provided very valuable information concerning the role of TGF? and Activin family members in the morphogenesis of the digits of tetrapods, including the formation of phalanxes, digital tendons, and interphalangeal joints. We emphasize the importance of the Activin and TGF? proteins as digit inducing factors and their critical interaction with the BMP signaling to sculpt the hand and foot morphology
An Evolutionarily Conserved Enhancer Regulates Bmp4 Expression in Developing Incisor and Limb Bud
To elucidate the transcriptional regulation of Bmp4 expression during organogenesis, we used phylogenetic footprinting and transgenic reporter analyses to identify Bmp4 cis-regulatory modules (CRMs). These analyses identified a regulatory region located ∼46 kb upstream of the mouse Bmp4 transcription start site that had previously been shown to direct expression in lateral plate mesoderm. We refined this regulatory region to a 396-bp minimal enhancer, and show that it recapitulates features of endogenous Bmp4 expression in developing mandibular arch ectoderm and incisor epithelium during the initiation-stage of tooth development. In addition, this enhancer directs expression in the apical ectodermal ridge (AER) of the developing limb and in anterior and posterior limb mesenchyme. Transcript profiling of E11.5 mouse incisor dental lamina, together with protein binding microarray (PBM) analyses, allowed identification of a conserved DNA binding motif in the Bmp4 enhancer for Pitx homeoproteins, which are also expressed in the developing mandibular and incisor epithelium. In vitro electrophoretic mobility shift assays (EMSA) and in vivo transgenic reporter mutational analyses revealed that this site supports Pitx binding and that the site is necessary to recapitulate aspects of endogenous Bmp4 expression in developing craniofacial and limb tissues. Finally, Pitx2 chromatin immunoprecipitation (ChIP) demonstrated direct binding of Pitx2 to this Bmp4 enhancer site in a dental epithelial cell line. These results establish a direct molecular regulatory link between Pitx family members and Bmp4 gene expression in developing incisor epithelium
Sp6 and Sp8 transcription factors control AER formation and dorsal-ventral patterning in limb development
The formation and maintenance of the apical ectodermal ridge (AER) is critical for the outgrowth and patterning of the vertebrate limb. The induction of the AER is a complex process that relies on integrated interactions among the Fgf, Wnt, and Bmp signaling pathways that operate within the ectoderm and between the ectoderm and the mesoderm of the early limb bud. The transcription factors Sp6 and Sp8 are expressed in the limb ectoderm and AER during limb development. Sp6 mutant mice display a mild syndactyly phenotype while Sp8 mutants exhibit severe limb truncations. Both mutants show defects in AER maturation and in dorsal-ventral patterning. To gain further insights into the role Sp6 and Sp8 play in limb development, we have produced mice lacking both Sp6 and Sp8 activity in the limb ectoderm. Remarkably, the elimination or significant reduction in Sp6;Sp8 gene dosage leads to tetra-amelia; initial budding occurs, but neither Fgf8 nor En1 are activated. Mutants bearing a single functional allele of Sp8 (Sp6-/-;Sp8+/-) exhibit a split-hand/foot malformation phenotype with double dorsal digit tips probably due to an irregular and immature AER that is not maintained in the center of the bud and on the abnormal expansion of Wnt7a expression to the ventral ectoderm. Our data are compatible with Sp6 and Sp8 working together and in a dose-dependent manner as indispensable mediators of Wnt/βcatenin and Bmp signaling in the limb ectoderm. We suggest that the function of these factors links proximal-distal and dorsal-ventral patterning
A comparative study of natural Tunisian clay types in the formulation of compacted earth blocks
This study investigates the physico-chemical, mineralogical and thermal characteristics of three natural Tunisian clays collected from Gafsa (A1), Zeramdine (A2) and Nabeul (A3). The aim was to promote an appropriate formulation of materials and to obtain optimal compacted earth blocks (CEB). Results of mineralogical analysis of clays revealed the dominance of kaolinite (>13.58%), illite (>25.7%), quartz (>18%) and a minor fraction of smectite phases. Chemical analysis of the clays major elements showed a SiO2 content exceeding 50% and a percentage of Al2O3 higher than 18%. Particle size distribution showed that clay fractions varied from 10 to 20%. Plasticity index defined a plastic character while the values of specific surface area were around 60 m2/g. This discrepancy has an effect on the behavior of these clays in CEB, notably their mechanical properties. From this characterization, it appears that all the sampled clays are suitable as raw material for CEB application. The prepared CEB formulations varied according to compaction energy and binder dosages. In this work, lime served as a binder at different rates (4, 6, 8 and 10%) to ameliorate the quality of CEB. Unconfined Compressive Strength values were determined by Static method test. Then bulk density, shrinkage and porosity values of samples were determined. Compressive strength could reach 7 MPa with lime supplementation in sample A1. The static compaction onto the sand-clay mixture achieved a value of density superior to 2 g cm−3 with lime supplementation in sample A1. Overall, the Gafsa clay was the most suitable for CEB preparation. Also, lime improved the compressive strength of the matrix, in addition to its ecological merits. © 2019 Elsevier Lt
DEM GPU studies of industrial scale particle simulations for granular flow civil engineering applications
The use of the Discrete Element Method (DEM) for industrial civil engineering industrial applications is currently limited due to the computational demands when large numbers of particles are considered. The graphics processing unit (GPU) with its highly parallelized hardware architecture shows potential to enable solution of civil engineering problems using discrete granular approaches. We demonstrate in this study the pratical utility of a validated GPU-enabled DEM modeling environment to simulate industrial scale granular problems. As illustration, the flow discharge of storage silos using 8 and 17 million particles is considered. DEM simulations have been performed to investigate the influence of particle size (equivalent size for the 20/40-mesh gravel) and induced shear stress for two hopper shapes. The preliminary results indicate that the shape of the hopper significantly influences the discharge rates for the same material. Specifically, this work shows that GPU-enabled DEM modeling environments can model industrial scale problems on a single portable computer within a day for 30 seconds of process time
Effect of particle size in aggregated and agglomerated ceramic powders
International audienceThis work describes the compaction of agglomerated and aggregated ceramic powders with special emphasis on the role of primary particle size. Discrete element simulations are used to model weakly bonded agglomerates as well as strongly bonded aggregates. Crushing tests are carried out to obtain the characteristic strength of single agglomerate and aggregate. Microstructure evolution and stress-strain curves indicate that aggregates undergo a brittle to plastic-like transition as particle size decreases below 50 nm. It is shown that agglomerates made of nanoparticles exhibit much greater strength than those made of micron-sized particles, with an approximately inverse linear relationship with primary particle size. Simulation of the uniaxial compaction of a representative volume element of powder demonstrates that adhesive effects are responsible for the difficulty to compact nanopowders and for the heterogeneity of microstructure prior to sintering
- …