591 research outputs found
Experimental and Numerical Study: Sheet Pile Abutment Systems for Water–Crossing Bridges
Sheet piles are geotechnical-structural elements with interlocking edges together that are driven into the ground to deliver soil retention and excavation support. Steel sheet pile walls are widely used for retaining walls, riverbank protection, seawalls, cofferdams, etc. In Nebraska, sheet pile walls prevent scouring and protect backfill for bridge abutment systems. While sheet piling is not designed and applied to resist vertical load, several recent studies attempted to investigate whether sheet piles could be employed for axial load bearing. Many projects from Europe and some in the U.S. have utilized the axial load-bearing capacity of sheet piles in bridge abutment constructions and high buildings for years. This thesis investigates the feasibility of these sheet piles\u27 function as axial load-bearing foundation elements and how sheet piles can cooperate with axial and lateral loads for applying a water-crossing bridge in Nebraska. The research conducted large-scale direct tests to evaluate the interface parameters between soil and sheet pile to estimate the side resistance acting on sheet piles under axial load. The test data was utilized for main input parameters for the numerical simulation of sheet pile abutment to estimate bearing capacity from the analytical method. The data obtained from the analytics and simulations were compared.
Furthermore, static pile load tests were conducted to evaluate the bearing capacity of a down-sized model sheet pile in a controlled test pit. A numerical simulation of sheet pile abutment was undertaken to understand sheet pile behavior under lateral and axial loads. This research evaluated how axial load can influence the failure criteria of sheet piles like horizontal deflection, shear force, and moment and how lateral load can affect the vertical settlement. The prerequisites to utilize sheet pile abutments, like effective span lengths of the bridge, excavation levels, anchors systems, and soil conditions, are provided in the parametric study.
Advisors: Seunghee Kim and Jongwan Eu
Integrating Word Embedding Offsets into the Espresso System for Part-Whole Relation Extraction
On hole approximation algorithms in wireless sensor networks
Routing holes in sensor network are regions without operating nodes. They may occur due to several reasons, including cases caused by natural obstacles or disaster suffering areas. Determining the location and shape of holes can help monitor these disaster events (such as volcano, tsunami, etc.) or make smart, early routing decisions for circumventing a hole. However, given the energy limit of sensor nets, the determination and dissemination of the information about the exact shape of a large hole could be unreasonable. Therefore, there are some techniques to approximate a hole by a simpler shape. In this paper, the authors analyze and compare two existing approximation approaches that are considered as the most suitable for the sensor network, namely the grid-based and the convex-hull-based approaches. And a new algorithm of the grid-based approach is also introduced. The performances of all the mentioned algorithms are under analysis and evaluation in both theoretical and experimental perspectives. The findings show that grid-based approach has advantages in saving network energy and providing a finer image of the hole while the convex hull approach is better for making a shorter hole-bypassing the route but not much
A New Recognition Method for Visualizing Music Emotion
This paper proposes an emotion detection method using a combination of dimensional approach and categorical approach. Thayer’s model is divided into discrete emotion sections based on the level of arousal and valence. The main objective of the method is to increase the number of detected emotions which is used for emotion visualization. To evaluate the suggested method, we conducted various experiments with supervised learning and feature selection strategies. We collected 300 music clips with emotions annotated by music experts. Two feature sets are employed to create two training models for arousal and valence dimensions of Thayer’s model. Finally, 36 music emotions are detected by proposed method. The results showed that the suggested algorithm achieved the highest accuracy when using RandomForest classifier with 70% and 57.3% for arousal and valence, respectively. These rates are better than previous studies
Evaluation of water management strategies for sustainable land use of acid sulphate soils in coastal low lands in the tropics
Model of neutrino effective masses
It is shown that an effective (nonrenormalizable) coupling of lepton multiplets to scalar triplets in the 331 model with sterile/exotic neutrinos, can be a good way for generating neutrino masses of different types. The method is simple and avoids radiative/loop calculations which, sometimes, are long and complicated. Basing on some astrophysical arguments it is also stated that the scale of SU(3)L symmetry breaking is at TeV scale, in agreement with earlier investigations. Or equivalently, starting from this symmetry breaking scale we could have sterile/exotic neutrinos with mass of a few keV's which could be used to explain several astrophysical and cosmological puzzles, such as the dark matter, the fast motion of the observed pulsars, the re-ionization of the Universe, etc
CHANGES IN PLASMA LEVELS OF STEROID HORMONES DURING SEXUAL MATURATION OF MALE HELICOPTER CATFISH (WALLAGO ATTU) IN CAPTIVITY
In order to provide reliable indicators of the spawning season of captive helicopter catfish (Wallago attu), this study evaluated the temporal variation in gonadosomatic index (GSI), plasma levels of testosterone (T), and 11-ketotestosterone (11-KT) in male broodstock in captivity. GSI was estimated as the percentage of the relative weight of testis to total body weight. Plasma levels of sex steroids were determined by enzyme-linked immunosorbent assay (EIA). Testis samples were dehydrated and embedded in paraffin, then sectioned at 5 μm thickness. The highest level of T (402.1 ± 16.7 pg/mL) was found in June, followed by a peak in 11-KT level (76.9 ± 4.7 pg/mL) in May. Testes containing the highest concentrations of spermatozoa were observed from June to August. The GSI of males increased significantly from January to June and peaked in July (2.14%). Taken together, we conclude that the spawning season of captive helicopter catfish occurs from June to August. These results will contribute to the basic knowledge of the reproductive biology of helicopter catfish, which can be useful in artificial breeding
Energy-efficient routing in the proximity of a complicated hole in wireless sensor networks
AbstractA quest for geographic routing schemes of wireless sensor networks when sensor nodes are deployed in areas with obstacles has resulted in numerous ingenious proposals and techniques. However, there is a lack of solutions for complicated cases wherein the source or the sink nodes are located close to a specific hole, especially in cavern-like regions of large complex-shaped holes. In this paper, we propose a geographic routing scheme to deal with the existence of complicated-shape holes in an effective manner. Our proposed routing scheme achieves routes around holes with the (1+
ϵ
)-stretch. Experimental results show that our routing scheme yields the highest load balancing and the most extended network lifetime compared to other well-known routing algorithms as well
Numerical and Experimental Study on the Grinding Performance of Ti-Based Super-Alloy
The experiments of the surface grinding of Ti-6Al-4V grade 5 alloy (Ti-64) with a resin-bonded cubic Boron Nitride (cBN) grinding wheel are performed in this research to estimate the influence of cutting parameters named workpiece infeed speed, Depth of Cut (DOC), cooling condition on the grinding force, force ratio, and specific energy. A finite element simulation model of single-grain grinding of Ti-64 is also implemented in order to predict the values of grinding forces and temperature. The experimental results show that an increase of workpiece infeed speed creates higher intensified cutting forces than the DOC. The grinding experiments under wet conditions present slightly lower tangential forces, force ratio, and specific energy than those in dry grinding. The simulation outcomes exhibit that the relative deviation of simulated and experimental forces is in the range of 1-15%. The increase in feed rate considerably reduces grinding temperature, while enhancement of DOC elevates the heat generation in the cutting zone
On the CP Violation Phase in a Neutrino Mixing Model with an A4 Flavor Symmetry
Neutrino masses and mixing in an extended standard model acquiring an A4 flavour symmetry are considered. The corresponding three-neutrino mixing matrix obtained via a pertur- bative method allows us to determine the Dirac CP violation phase (\delta_{CP}) as a function of the mixing angles (\theta_{12}, \theta_{23}, \theta_{13}). Then, numerical values and distributions of \delta_{CP} are given. The latter values are quite close to the global fits of the experimental data for both the normal ordering and inverse ordering of the neutrino masses
- …