Vietnamese and the NP/DP parameter

This paper investigates the place of Vietnamese in the NP/DP typology as formulated by Bošković (2005, 2008, 2009, 2010). We show that Bošković’s NP/DP parameter breaks down into at least three separate parameters. In many languages, these three parameters line up in a consistent manner and conspire to give the impression that there is a single macro-parameter at work. However, due to its mixed status, Vietnamese reveals that there are in fact three smaller parameters (nominal, clausal, and quantificational) at work, and that these are independently fixed (as [–DP], [+TP], and [–movement], respectively). Moreover, Vietnamese can in general be classified as a topic-prominent language, a classification which requires more research but which plays an important role in determining the behavior of Vietnamese with regard to many of the syntactic properties discussed

Single phase second order sliding mode controller for complex interconnected systems with extended disturbances and unknown time-varying delays

Novel results on complex interconnected time-delay systems with single phase second order sliding mode control is investigated. First, a reaching phase in traditional sliding mode control (TSMC) is removed by using a novel single phase switching manifold function. Next, a novel reduced order sliding mode observer (ROSMO) with lower dimension is suggested to estimate the unmeasurable variables of the plant. Then, a new single phase second order sliding mode controller (SPSOSMC) is established based on ROSMO tool to drive the state variables into the specified switching manifold from beginning of the motion and reduce the chattering in control input. Then, a stability condition is suggested based on the well-known linear matrix inequality (LMI) method to ensure the asymptotical stability of the whole plant. Finally, an illustrated example is simulated to validate the feasible application of the suggested technique

Power beacon-assisted energy harvesting in a half-duplex communication network under co-channel interference over a Rayleigh fading environment: Energy efficiency and outage probability analysis

In this time, energy efficiency (EE), measured in bits per Watt, has been considered as an important emerging metric in energy-constrained wireless communication networks because of their energy shortage. In this paper, we investigate power beacon assisted (PB) energy harvesting (EH) in half-duplex (HD) communication network under co-channel Interferer over Rayleigh fading environment. In this work, we investigate the model system with the time switching (TS) protocol. Firstly, the exact and asymptotic form expressions of the outage probability (OP) are analyzed and derived. Then the system EE is investigated and the influence of the primary system parameters on the system performance. Finally, we verify the correctness of the analytical expressions using Monte Carlo simulation. Finally, we can state that the simulation and analytical results are the same.Web of Science1213art. no. 257

Excellent luminous flux of WLEDs with flat dual-layer remote phosphor geometry

This paper focuses on the comparison of the luminous flux of two dual-remote phosphor structures named flat dual-remote phosphor (FDRP) and concave dual-remote phosphor (CDRP). These two configurations have different luminous flux values due to the disparity in scattering properties in white LEDs. However, the researched results showed that FDRP structure is more lucrative than the CDRP structure when it comes to the luminous flux effectiveness. To support the aforementioned idea, this article also presents the influence of the distance between two phosphor layers (d1) and the distance between the phosphor layer with the LED surface (d2) on the optical properties of the FDRP structure. Specifically, the scattering ability and absorption properties of the remote phosphor layer will vary sharply if d1 and d2 are adjusted into different values, which produces an immense impact on the chromatic homogeneity and illumination capability of WLEDs. Therefore, in order to stabilize the correlated color temperature (CCT) of WLEDs at 8500 K when there is a modification on d1 and d2, the concentration of YAG:Ce3+ phosphor also needs to be varied. Accordingly, the scattering process and absorption phenomenon in the remote phosphor layer will bottom out when d1 = d2 = 0,  leading to the worst color quality and luminous flux. The effect of the spectra generated as these distances are adjusted is obvious evidence for this point. In other words, the larger the d1 and d2, the larger the scattering surface, and thus the blending of blue and yellow light rays will become more homogeneous, yielding the smallest white light deflection and the lowest luminous flux at the same time. The paper's results indicated that the luminous flux will reach a peak at 1020 lm if d1 = 0.08 mm or d2 = 0.63 mm and the chromatic deflection will hit the lowest point as d1 = 0.64 mm or d2 = 1.35 mm. In the end, manufacturers can make their choice for the production of higher-standard WLEDs based on the general knowledge and helpful information that the article has provided and analyzed

Improving luminous flux and color homogeneity of dual-layer phosphor sctructure

In order to clarify the main purpose of the study, we put a green phosphor layer SrBaSiO4:Eu2+ on the yellow phosphorus layer YAG:Ce3+ through using only one WLEDs structure in different color temperatures like 5600 K, 6600 K, 7700K. Then, we find the suitable SrBaSiO4:Eu2+ concentration in order that the luminous flux could get the highest value. The results show that SrBaSiO4:Eu2+ brings great benefits to increase not only optical gain but also color uniformity. Specifically, the greater the SrBaSiO4:Eu2+ concentration, the greater the output of WLEDs because of the development of green light component in WLEDs. However, only if the SrBaSiO4:Eu2+ concentration exceeds the level, a slight decrease in color rendering index (CRI) can occur, which based on Monte Carlo simulation. In addition, the results of this paper have contributed significantly to the creation of higher-powered WLEDs

Performance analysis for power-splitting energy harvesting based two-way full-duplex relaying network over nakagami-m fading channel

Energy harvesting relay network is considered as the promising solution for a wireless communication network in our time. In this research, we present and demonstrate the system performance of the energy harvesting based two-way full-duplex relaying network over Nakagami-m fading environment. Firstly, we propose the analytical expressions of the achievable throughput and outage probability of the proposed system. In the second step, the effect of various system parameters on the system performance is presented and investigated. In the final step, the analytical results are also demonstrated by Monte-Carlo simulation. The numerical results demonstrated and convinced the analytical and the simulation results are agreed with each other

An End-to-End Time Series Model for Simultaneous Imputation and Forecast

Time series forecasting using historical data has been an interesting and challenging topic, especially when the data is corrupted by missing values. In many industrial problem, it is important to learn the inference function between the auxiliary observations and target variables as it provides additional knowledge when the data is not fully observed. We develop an end-to-end time series model that aims to learn the such inference relation and make a multiple-step ahead forecast. Our framework trains jointly two neural networks, one to learn the feature-wise correlations and the other for the modeling of temporal behaviors. Our model is capable of simultaneously imputing the missing entries and making a multiple-step ahead prediction. The experiments show good overall performance of our framework over existing methods in both imputation and forecasting tasks

Factors affecting the creativity of high school students

Creativity is a vital personality quality of each individual. Each person has their potential for creativity, and it can be nurtured and developed in an appropriate and safe environment. The purpose of the study was to find out which factors from schools and students themselves affect creativity as well as the association between creativity and age, gender and giftedness of students, which then a basis to adjust and establish appropriate methods from schools, families, and students themselves to develop elements and their creativity. The study was conducted on 108 high school students in three grades from giftedness and non-giftedness schools. The data was collected through a survey method using a self-constructed questionnaire and drawing creativity test TCT-DP to determine students' creativity levels and personal information. The study's finding, which uses mathematical methods and one-way analysis of variance, reveals that factors affecting elements and creativity level are objective factors including education environment from school; behavior of teachers, and subjective factors including interests, perspectives, and thoughts of students. It was also found that there were no significant differences in the components of creativity and creativity among students in different grades, gender, and groups of giftedness schools

Interest rate pass-through estimates from error correction models ECM

This paper examines the degree of pass-through and adjustment speed of retail interest rates in response to changes in monetary policy rates in commercial banks of Viet Nam during the period 07/2004 to 06/2014. The results show that the degree of pass-through of retail interest rates is incomplete but high (0.7-0.93). The adjustment speed of money market rates & retail interest rates is relatively slow. It takes from 3 to 6 months for money market rates & retail interest rates to be adjusted to long-term equilibrium, except 1 month VNIBOR. 1 month VNIBOR is sensitive to changes of discount rate & refinancing rate in short-term, contrary to 3 month VNIBOR . The degree of pass-through from market rates to retail interest rates is fairly high in the long-term but low in the short-term. The degree of pass-through is different between various retail interest rates. Specifically, the degree of pass-through of deposit rates is higher than that of lending rates both in the short-term & long-term

Effect of Red Y2O3:Eu3+ phosphor on the color quality and luminous efficacy of the 7000K IPW-LEDs

In this study, we investigate the effect of concentration of the red Y2O3:Eu3+ phosphor on the Color Rendering Index (CRI), Color Quality Scale (CQS) and Lumen Output (LO) of the 7000K in-cup packaging white LEDs (IPW-LEDs). The physical model of the 7000K IPW-LEDs is conducted by Light Tools software. By varying the concentration of the red phosphor from 0% to 0.36%, we use the Light Tools software to investigate the CRI, CQS, and LO of the 7000K IPW-LEDs. From the research results, it can be observed that the CRI and CQS can be increased to 85 and 71, respectively. However, the LO has a decrease in the increasing trend of the red phosphor concentration. This paper provides the new recommendation for the manufacturing of the IPW-LEDs