37,224 research outputs found
A TWT amplifier with a linear power transfer characteristic and improved efficiency
A novel method called "Dynamic Velocity Taper' to linearize the Pout versus Pin transfer characteristic that does not require any extraneous circuitry or tuning, has large bandwidth capabilities ( 10 percent) and offers also an increase in the intrinsic traveling wave tube (TWT) efficiency by 1 to 2 dB is described. In addition, the method permits the TWT to be operated at or near the synchronous voltage (b plus or minus o) which produces a flat small and large signal gain responses and low AM to PM conversion. The physics of the method and experimental verification are given. The implementation should have a significant impact on TWT performance and increase the channel capacity of communication satellites
A Potts Neuron Approach to Communication Routing
A feedback neural network approach to communication routing problems is
developed with emphasis on Multiple Shortest Path problems, with several
requests for transmissions between distinct start- and endnodes. The basic
ingredients are a set of Potts neurons for each request, with interactions
designed to minimize path lengths and to prevent overloading of network arcs.
The topological nature of the problem is conveniently handled using a
propagator matrix approach. Although the constraints are global, the
algorithmic steps are based entirely on local information, facilitating
distributed implementations. In the polynomially solvable single-request case
the approach reduces to a fuzzy version of the Bellman-Ford algorithm. The
approach is evaluated for synthetic problems of varying sizes and load levels,
by comparing with exact solutions from a branch-and-bound method. With very few
exceptions, the Potts approach gives legal solutions of very high quality. The
computational demand scales merely as the product of the numbers of requests,
nodes, and arcs.Comment: 10 pages LaTe
S-Net for multi-memory multicores
Copyright ACM, 2010. This is the author's version of the work. It is posted here by permission of ACM for your personal use. Not for redistribution. The definitive version was published in Proceedings of the 5th ACM SIGPLAN Workshop on Declarative Aspects of Multicore Programming: http://doi.acm.org/10.1145/1708046.1708054S-Net is a declarative coordination language and component technology aimed at modern multi-core/many-core architectures and systems-on-chip. It builds on the concept of stream processing to structure dynamically evolving networks of communicating asynchronous components. Components themselves are implemented using a conventional language suitable for the application domain. This two-level software architecture maintains a familiar sequential development environment for large parts of an application and offers a high-level declarative approach to component coordination. In this paper we present a conservative language extension for the placement of components and component networks in a multi-memory environment, i.e. architectures that associate individual compute cores or groups thereof with private memories. We describe a novel distributed runtime system layer that complements our existing multithreaded runtime system for shared memory multicores. Particular emphasis is put on efficient management of data communication. Last not least, we present preliminary experimental data
On the soft X-ray spectrum of cooling flows
Strong evidence for cooling flows has been found in low resolution X-ray
imaging and spectra of many clusters of galaxies. However high resolution X-ray
spectra of several clusters from the Reflection Grating Spectrometer (RGS) on
XMM-Newton now show a soft X-ray spectrum inconsistent with a simple cooling
flow. The main problem is a lack of the emission lines expected from gas
cooling below 1--2 keV. Lines from gas at about 2--3 keV are observed, even in
a high temperature cluster such as A 1835, indicating that gas is cooling down
to about 2--3 keV, but is not found at lower temperatures. Here we discuss
several solutions to the problem; heating, mixing, differential absorption and
inhomogeneous metallicity. Continuous or sporadic heating creates further
problems, including the targetting of the heat at the cooler gas and also the
high total energy required. So far there is no clear observational evidence for
widespread heating, or shocks, in cluster cores, except in radio lobes which
occupy only part of the volume. The implied ages of cooling flows are short, at
about 1 Gyr. Mixing. or absorption, of the cooling gas are other possibilities.
Alternatively, if the metals in the intracluster medium are not uniformly
spread but are clumped, then little line emission is expected from the gas
cooling below 1 keV. The low metallicity part cools without line emission
whereas the strengths of the soft X-ray lines from the metal-rich gas depend on
the mass fraction of that gas and not on the abundance, since soft X-ray line
emission dominates the cooling function below 2 keV.Comment: 5 pages, with 2 figures, submitted to MNRA
Wind-tunnel/flight correlation study of aerodynamic characteristics of a large flexible supersonic cruise airplane (XB-70-1). 3: A comparison between characteristics predicted from wind-tunnel measurements and those measured in flight
A program was undertaken by NASA to evaluate the accuracy of a method for predicting the aerodynamic characteristics of large supersonic cruise airplanes. This program compared predicted and flight-measured lift, drag, angle of attack, and control surface deflection for the XB-70-1 airplane for 14 flight conditions with a Mach number range from 0.76 to 2.56. The predictions were derived from the wind-tunnel test data of a 0.03-scale model of the XB-70-1 airplane fabricated to represent the aeroelastically deformed shape at a 2.5 Mach number cruise condition. Corrections for shape variations at the other Mach numbers were included in the prediction. For most cases, differences between predicted and measured values were within the accuracy of the comparison. However, there were significant differences at transonic Mach numbers. At a Mach number of 1.06 differences were as large as 27 percent in the drag coefficients and 20 deg in the elevator deflections. A brief analysis indicated that a significant part of the difference between drag coefficients was due to the incorrect prediction of the control surface deflection required to trim the airplane
- …